I am wanting to create a .ipt (part) file in Inventor 2012, save it as a .stl file, and open it up in Project Falcon to test it in the wind tunnel.How do you save an .ipt file as a .stl file in Inventor 2012? I hav tried going to "Save as..." and changing the extention to .stl, but not luck there.
View 3 RepliesWhenever I customize some keyboard commands, they always seem to reset after I close and re-open Inventor. I'm not quite sure how I could be missing something. I've gotten very use to these commands in previous versions. Once I setup my commands, I am able to use them for the session.
Inventor 2012 Ultimate/XP Pro
I'm linking an excel file to an .ipt file with iLogic code determining if the Material type is a certian value it will find the correct material thickness. These file work great when working on them thru Vault but when I "Save As Template" and create this file where our other template files are located (not Vault) this fuction does not work. I have realized that I had to place the a copy of the excel file in the same file folder as the template ipt, but even this does not fix the issue.
I recieve this error:
Error in rule: Material, in document: Part6
'MWW Materials (Inventor).xlsx' could not be found. Check the spelling of the file name, and verify that the file location is correct.
If you are trying to open the file from your list of most recently used files, make sure that the file has not been renamed, moved, or deleted.
It seems completly countintutive that just saving the file as a template file would cause this not to work when all files that are required are located in the same file folder. Maybe I need a reference to the excel document within the iLogic code.
Everytime I want to open idw file only in one folder, it comes with dwg and idwfiles. I have to identify the idw files from many dwg files, sometime I just opened dwg file due to the same name with the idw file. (For project purpose, I need to save idw and dwg file in the same folder).
I hope I can open idw files only as I choose to open iam and ipt only, and remove *.dwg from File of types (*.dwg; *.idw).
I have a question regarding display problems when I import my Inventor assembly into Showcase and try to apply ray tracing. The assembly file is now missing some part and does not display at all. The assembly file is model that has been designed with frame generator however some of these framed generated parts just don't display. The strange this is they do display in other less desired formats such as shaded etc but not when ray tracing.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
What is the risk Migrating Inventor 2009 files to Inventor 2012?
Do i have to migrate the Inventor 2009 files to 2010 and up to 2012?
I have recently installed Inventor Professional 2012 Student Version, and I'm unable to create a new file, as the program crashes as I try to do so.
After starting Inventor, I select New than Standard.ipt. The file starts loading, the status of the loading process can be seen in the bottom left corner, than the "Open Documets in Session" counter in the bottom right corner changes from 0 to 1, as it should, I guess. And than, the program freezes. Sometimes, a message appears after several minutes that an error has occured, and that I should send an error report to Autodesk (which I did); but sometimes, no message appears at all, it simply crashes.
My computer specs are: Intel Core 2 @1,86 GHz, 2 GB RAM, NVidia GeForce 9800 GTX, 60 GB free space, Windows Vista (hotfix installed) Not a powerhouse, but I think it should be able to start a file properly I think, if I understand the system requirements correctly.
My model is ~1-2MB and I'm trying to 3D print it. I am trying to export it as a .stl file but no matter how I try doing it (going through the print piece flow or export flow), the file is either 84 bytes or 0KB.
Is this a known issue, or am I doing something worng?
I've tried restarting the program/my environment.
inventor 2012 sp1- single user- lap top screen dies, so I loaded up all my file to external hard drive down load inventor to desktop for 30 day trial until my laptop gets fixed. laptop back up everything good moved files over except in one the assemlblies i had added some screws from the inventor catalog (place from content center menu. now I open the assembly drawing it is has unresolved files all the ones from that I loaded from the standard content center. I assueme it is looking for the files stored on the 30 day trial on the desktop but I can seem to find them to try and move them over.
View 3 Replies View RelatedI would like to report on a latest problem i encountered.
I dunno why, but when it started to run a part fill analysis, Inventor prompted me that it ""Failed to create a new study file".
I tried restarting inventor and still, nothing happened. Moreover, i tried another file and it worked. How come for this part it didnt?
I can save as bitmap (bmp) camera view below
Sub cameraAndSaveAsBitmap(ByVal GelenYol As String)
'Bu kod açık dosya üzerindeki parçayı geni açıya alıyor ve görüntüyü
'c: emp dizini içerisine DosyaAdı.bmp olarak kaydediyor.
[Code]....
But I want to seve as jpg instead of bmp format...
I get this every time i try to close an .ipt.
The current operation requires data from docuemt {location on my network{ but it cannot be found.
I am using Inventor 2012 and C#. I would like that, when I close my Form, Inventor and all files that are open will be closed with displaying the message about saving the files .Some of my opened file are stored in Lists.
This code das not work Inventor still asking me about saving the files.
private void Form1_FormClosed(object sender, FormClosedEventArgs e)
{
if (InventorOpen._started)
{
oDrawDoc.Close(false);
foreach (Inventor.AssemblyDocument openAssemDocument in openAssemDocumentsList)
{
openAssemDocument.Activate();
[code]....
When I try to save a 2 D drawing as a DXF file, I get a box saying "problems encountered while saving the document". I am using version 2012. My older version did this operation without a problem.
View 8 Replies View RelatedI took an existing assembly from one specidifc directory and copied it to another location. Then one part by one I use the replace command to swap out the parts to map to the new location because when I went to iproperties it was still pathing to the old location. I change the new parts physical features (i.e. length, diameter).
I get done with it and all references are pointing to the new location.
I exit out of inventor and call up the new assembly and it has mate errors because the parts are all of the old ones from the original location. Why is it not remembering or retaining the new parts and there locations?
Even when I have gotten this screen I have selected "No" to the bottom (2nd) selection which is the original location I do not want.
OK then update. I select never show this message agian ever (my favorite ) - but guess what a it pops back up. Nothing is wrong with the assembly
View 1 Replies View RelatedI have only been using Inventor since late winter . I have create a "master" folder with an assembly, drawing, and excel cutlist. This folder also contains sub folders with the sub-assemblies and parts.
In my master assembly I created ILogic rules to change dimensions of the parts, to select different profiles and to select different sub assembly configurations (on/off). It works fine as is.
Now, the idea was to copy the whole "master" folder and rename it to a job, launch the master assembly and configure it, then save it. The issue is that, even though the master assembly is in a new folder, it still references the sub-assemblies and parts from the "master" folder. How do I write a rule to "save as" all these sub-assemblies and parts to the new location?
We modeled parts in inches. We save as copy to an .STL file to get SLA prototypes made. The parts came back 2.54 times bigger than needed. Reason is the default setting for saving as .STL files is Centimeters.... Not sure why Autodesk did this....but yes I understand it's not their fault, we should have checked under options and changed it to inches.....we just assumed that you model in inches, it would save as in inches....See what happens when you assume....
View 5 Replies View Relatedit is possible to save a stressed part from a simulation in Inventor as an .ipt in its displaced condition?
View 1 Replies View RelatedTrying to create a bit of code that when the 'OnNew Document' event is fired the code checks for a particular Custom Property. Depending on what the Custom Property is set to a form is then fired with relevant text to point the user to a specific area in the workspace. Al this works ok.
But if they press cancel i need the code close the activate 'Part1' which inturn then allows the user to select 'New' to begin again.
I have tried various scenarios but the main problem is that Inventor then crashes!
PublicSub applicationEvents_OnNewDocument(DocumentObject As Inventor._Document, BeforeOrAfter As Inventor.EventTimingEnum, Context As Inventor.NameValueMap, ByRef HandlingCode As Inventor.HandlingCodeEnum) Handles applicationEvents.OnNewDocument
[Code]....
I tried to use 2012 task scheduler to migrate files, got an error message saying it won't support vault project file. I used vault project file for version 2010.
View 1 Replies View RelatedI use a machine called a shopbot to cut wood projects. Students draw the parts in Inventor, place them into a idw and use the save copy feature to save it as a DXF file. The shopbot uses a progam called partworks v2 and it reads DXF files. This worked great for the past few years until this summer when we installed the 2013 inventor on our computers. I contacted Shopbot and they said other people are having the same problem and the solution for most of them was to save the idw file as an older version. Last year we had AutoDesk 2011 and it worked fine. how I can save a 2013 idw as a 2011 idw?
View 5 Replies View RelatedI'm having a problem with the files saved from Inventor, regardless of type. I have no problem saving new files or opening files, however, any time I try and save changes to a file, inventor crashes. Also if I try and move a file, windowes explorere gets stuck at "descovering items." Renaming a file crahses explorer.
One of the files is attached.
I have a situation where a teacher in our PLTW(Project Leads The Way) who uses inventor products for sometime is not able to save a old current project or make changes to this project, then save it. What is happening is it gives a blue screen error and corrupts the file so it cannot be fixed or opened. We cannot duplicate the process with the teacher, but we can if the file is opened on another computer and it is opened also on another computer at the same time as other pc. However, the teacher states that he doesn't have it open on any other PCs in the school.
View 2 Replies View RelatedInventor 2009 creates XLS file when saving assembly drawing (IDW file).Why? How to get rid of that?
View 6 Replies View RelatedI would like to save my inventor Part and Assembly model file in a lower version. Like in our company we use both Inventor 2012 and 2010. Once the file is created in 2012 and when shared to 2010 users they are unable to open, is there any possiblities to open 2012 files 2010 like how we do in Autocad.
View 2 Replies View RelatedLike the subject says. I know there is a place to check or uncheck whether you want Adobe Reader to launch after you have saved a file to .pdf but for the life of me I can't remember where that is located.
Inventor 2012
Windows 7 64 Bit
It is possible to save from AutoCAD 2012 Mechanical back to REGULAR AutoCAD 2006 Lite? I am updating files on my computer with 2012 Mechanical but have to email them back to the original computer (which only has AutoCAD Lite) to print them out. I wouldn't think it would matter if the save format is AutoCAD Mechanical 2006 as long as it is still a .dwg file, correct?
View 5 Replies View RelatedAutoCAD LT 2012
I had my automatic save set up for every 10 minutes but files were not being saved regularly. I deleted files from the Temp folder thinking it was full and now there are no .sv$ saving at all. How can I make drawings save automatically every 10 minutes?
Having trouble with AutoCAD 2012 when saving to earlier versions? I can't save it down to any other version except for 2012, without the system crashing completely.
Also, from time to time we get the crash when editing MText.
We have AutoCad LT 2012 version. We encounter fatal error when we save the drawing. we cannot finish our job because everytime we save our work it will show a messsage FATAL ERROR.
View 5 Replies View Related