Having trouble with AutoCAD 2012 when saving to earlier versions? I can't save it down to any other version except for 2012, without the system crashing completely.
Also, from time to time we get the crash when editing MText.
It seems that even when the document was from a 2010 version, if I open it, and save it, it automatically saves it to the 2014 version cad.Is there a setting on Autocad LT 2014 that allows me to automatically save to an earlier version of CAD (2010) instead of the 2014 whenever I hit SAVE.
View 1 Replies View RelatedI am using Autocad LT 2012 on Windows XP at my office computer. I Save a file in an earlier version e.g. 2004 or 2007 and email to home computer, Autocad LT 2008 on Windows Vista. The file will not open. Message is that the file has been created by a later version. THis has not been my experience with earlier versions.
View 7 Replies View RelatedHow do you save down to earlier version? It doesn't let me when I do a save as and click on version I want. Just gives me an error message and shuts autocad down.
I have to save 2011 drawing down to autocad 2004. I sure hope its possible. It always has been with earlier versions.
I have Revit MEP 2012 and created a small guest house in this program. I wanted to add some features using Revit Architecture 2011that are not available in the MEP program. When I tried to bring the files up in the Revit architecture program I get an error message that the drawing was created in a later version of Revit. Is there any way to save the MEP file back to an earlier version of Revit like one could do with Autocad drawings?
View 2 Replies View RelatedI'm having a problem with the files saved from Inventor, regardless of type. I have no problem saving new files or opening files, however, any time I try and save changes to a file, inventor crashes. Also if I try and move a file, windowes explorere gets stuck at "descovering items." Renaming a file crahses explorer.
One of the files is attached.
Having trouble with AutoCAD 2012 when saving to earlier versions? I can't save it down to any other version except for 2012, without the system crashing completely. It seems to be files that have aerial xrefs in them.
Also, from time to time we get the crash when editing MText.
using AutoCAD '10. I have a free trial of 2013 to preview before buying and I'm doing some freelance work with an opportunity to be hired full time. The comany I am working for has a pen set that they sent to me in an e-mail. In order to send PDF's of my work back I must use this pen set. The pen files are from an earlier version of AutoCAD- 2007 and are attachments in an e-mail.
View 3 Replies View RelatedWhen I I convert a 2012 dwg into a 2007 format whether using true view or "saving as" 2007 from an open drawing, some of the graphics disappear. How do I convert withour losing these graphics?
View 1 Replies View RelatedWiped my whole computer clean, reinstalled Windows 7, Can't reinstall Autocad 2012 student version.
Installation failed and this is the line from the log:
2013/8/1:13:30:28 carol HENRY Installing Microsoft Visual C++ 2008 SP1 Redistributable (x86): D:3rdPartyx86VCRedist2008SP1vcredist_x86.exe /q
2013/8/1:13:30:48 carol
why our copies of AutoCAD MEP 2012 seem to hang when loading the default dwt files? On the splash screen it details all the files being loaded and when it gets to the dwt file it just hangs at 0%. In the windows task manager, acad.exe stops using memory (around 90megs) and the cpu stops too. It's get's really frustrating, especially as it only seems to affect our new Dell Optiplex's and a couple of our old Dell Precisions. Some of them work first time every time, no probs. All PC's are Windows 7 Pro 64bit and running the latest service packs for AutoCAD.
View 2 Replies View RelatedWe are running Autocad 2012 on Windows 7 and printing to an HP5200 via server mapping in three different labs.
Had a similar problem before and changed the printer drivers from Universal back to PCL5. Since Christmas however this problem seems to have come back. We haven't changed anything. Wondering if maybe there were patches or something that affected this?? When we preview or send a print job Autocad just greys out and crashes. I do know that if we configure the computer to print via TCPIP it also works fine but this is not ideal with the number of computers and students we have.
Another thing we seemed to have noticed is that we don't have this problem with all printers but more oddly we noticed that when we change the default template some templates work and some don't.
By default we are set up to use the acadiso template as we are using the metric system - we can't get anything to plot using this. If we start with the standard acad template we do not have this problem. We have tried plotting a simple circle or a more complex drawing with the same result. The sample files plot fine but I'm guessing they were likely not done in metric...
I created and replaced a dwt in 2013. tried opening it in 2012 and it crashes with a "fatal error: unhandled access violation writing 0xec307ff8 exception at ec307ff8h". I restored to whole folder with our dwts to before I created them. and still crashes with 2012. they open fine in 2013.
Dell t1500 i7 8 gb ram
Windows 7 64 bit
ati firepro v4800
why few of the drawings processed in Autocad 2004 version and saved in autocad 2000 cannot be opened in different Autocad version such as 2012
View 6 Replies View Related have two questions:
1: I currently am using AutoCAD 2011 is there any option to back save drawings to 2008? I do not seem to have this choice.Only 2010 or 2007 or 2004.
2: If I upgrade to 2014 or 2013 will I have the option to back save to 2008?
When I start Reference Manager, the program window opens but at the same moment a message window opens saying 'AutoCAD component has stopped working Windows is checking for a solution to the problem...'. A solution is not found, so I can only select 'Close program', and the program closes. I have run Reference Manager successfully a few weeks ago, and after that I haven't installed or removed Autodesk programs. I have Windows 7 64-bit, AutoCAD Mechanical 2012 SP2 and Factory Design Suite Ultimate 2013. I cannot use Reference Manager 2013 (which works) because it saves the files in 2013 format.
In Windows Control Panel / Troubleshooting I found a file with the following text:
Description
Faulting Application Path: C:Program FilesAutodeskAutoCAD Mechanical 2012AdRefMan.exe
Problem signature
Problem Event Name: APPCRASH
Application Name: AdRefMan.exe
Application Version: 18.2.51.0
Application Timestamp: 4d4b63d1
Fault Module Name: AdRefMan.exe
Fault Module Version: 18.2.51.0
Fault Module Timestamp: 4d4b63d1
Exception c0000005
Exception Offset: 000000000003dc71
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1035
Additional Information 1: 9416
Additional Information 2: 9416e8b8865dfbe86f7b5b96c4331260
Additional Information 3: c86b
Additional Information 4: c86b8562f11a561a601a7649b1d675a3
Im currently using Autocad 2008 and am in the process of creating blocks for a friend who is using 2005, i have loads that need converting or writing so that they can be opened in 2005.
View 6 Replies View RelatedI bought a new laptop Asus k73SV-TY081V version. When i'm working with autoCAD 2012, my videocard crashes and i get a message: "Display driver Intel Graphics Accelerator Drivers for Windows 7® stopped responding and has successfully recovered"
View 9 Replies View RelatedI installed Photoshop CS6 - 64 bit, but Bridge keeps opening up photos in my CS5 that is still on my computer. How do I change this so that it will open the photos in Photoshop CS6?
View 9 Replies View RelatedI have recently upgraded to ver 2012 from ver 2000. I have numerous macros that were written for the older version that I need to utilize in ver 2012. I manually recreated them in the new version by typing in the commands from ver 2000. As I expected I am getting errors when I try to run these macros in Ver 2012. The mlayer command, for example, does not work. I am pretty sure I need to use the -layer command and have tried this but I still get errors. While I am relatively proficient in ver 2000 I am having some trouble finding commands in ver 2012 that match the old version. Below is an example of a macro from ver 2000 as well as my attempt to rewrite it in ver 2012.
^C^C(mlayer "notes" "cyan" nil) -insert;B6;insert;;;;$S=NUMB0
my rewrite:
^C^C(-layer;m;"notes" "cyan" nil) -insert;B6;insert;;;;$S=NUMB0
I have some issue in Trim command,.
(Please see the attached picture before read the below steps,.)
generally, I use trim command like this,.
Command: tr (enter) (enter)
select object: (I will select object which I need to trim)
it gave the results shown in the picture named "Earlier result"
But now I am getting differently like "current result"
But Earlier result is comfortable for me,.
Is this because of setting problem?
Can Autocad LT 2014 read Autocad LT 2010 files?
View 3 Replies View RelatedIs this supported by Autodesk, and will installing both products create any issues?
View 3 Replies View RelatedCan a 32 bit version of AutoCAD 2012 be installed on a 64 bit machine with windows 7 and a 64 bit version of AutoCAD 2012 on it? It is a network machine.
View 4 Replies View RelatedI need to know if by any means we can open dwf files in AutoCAD LT? I have 2012 version.
View 5 Replies View Relatederror messages that say I can't use various functions because the file has objects from a newer version. I have ACA 2012 and the file is from ACA 2013.
Isn't there a way to convert or eliminate these 'objects' so I can use these files 'normally' in 2012 ACA?
I have an Nvidia Quadro FX1500 graphics card on XP64. Getting the correct video driver for ACA is critical as we all know. I did a search of the Adesk web site and one page told me to use version 259.57, while another page told me to use version 265.70.
The page telling me to use the newer driver was under the certified hardware page, where ACA is not a choice in the product used, only acad.The page telling me to use the older version was under the ACA support page.Then I go to the Nvidia web site and they tell me to use the 191.00 version.I'vehad a look nside the hardware XML installed with 2012 and te supported driver version is 6.14.0012.6570.
In our office we use autocad 2007 but in our architect office send us drawing on autocad 2012 version drawings we converted all drawings 2012 to 2007 autocad version with drawing true viewer... n than we work smartly..... but when i send drawings..architects office draftsmans open my autocad 2007 version drawings on autocad 2012 version and than show recovery message.. and than drawing close...
View 4 Replies View RelatedThe company I am working for has the old 2000 version of AutoCad. They send me drawings with blocks and attributes. But when I start working on them the system will lock up and not let me do anything else. I can maybe get two or three commands in then it will lock up. It doesn't even let me send a C.E.R. (customer error report) I have downloaded all of the service packs and the hot fixes but the problem persists. I don't where to go from here. My co worker thinks it may be a memory problem but I doubt it.
View 2 Replies View RelatedI have a brand new HP Probook 4530s with the correct requirements to run LT 2012 as well as a certified and tested graphics card and latest drivers, but as soon as I try using offset or trim functions while drawing, my screen goes blank for about 4 seconds and an error message below tells me my Display Driver has stopped working and has recovered.
No matter the screen resolution settings, it still does the same, also the laptop is still cool, so can't be a heat issue.
My work helpdesk has recently installed AutoCad 2012 and my co worker and I noticed that at the start up its loads very slowly and often when we double click on a DWG to open (without Autocad being already open) it crashes.
View 2 Replies View Related