AutoCAD 2010 :: 2012 - Application Crashes When Printing?
Feb 28, 2013
We are running Autocad 2012 on Windows 7 and printing to an HP5200 via server mapping in three different labs.
Had a similar problem before and changed the printer drivers from Universal back to PCL5. Since Christmas however this problem seems to have come back. We haven't changed anything. Wondering if maybe there were patches or something that affected this?? When we preview or send a print job Autocad just greys out and crashes. I do know that if we configure the computer to print via TCPIP it also works fine but this is not ideal with the number of computers and students we have.
Another thing we seemed to have noticed is that we don't have this problem with all printers but more oddly we noticed that when we change the default template some templates work and some don't.
By default we are set up to use the acadiso template as we are using the metric system - we can't get anything to plot using this. If we start with the standard acad template we do not have this problem. We have tried plotting a simple circle or a more complex drawing with the same result. The sample files plot fine but I'm guessing they were likely not done in metric...
why our copies of AutoCAD MEP 2012 seem to hang when loading the default dwt files? On the splash screen it details all the files being loaded and when it gets to the dwt file it just hangs at 0%. In the windows task manager, acad.exe stops using memory (around 90megs) and the cpu stops too. It's get's really frustrating, especially as it only seems to affect our new Dell Optiplex's and a couple of our old Dell Precisions. Some of them work first time every time, no probs. All PC's are Windows 7 Pro 64bit and running the latest service packs for AutoCAD.
I created and replaced a dwt in 2013. tried opening it in 2012 and it crashes with a "fatal error: unhandled access violation writing 0xec307ff8 exception at ec307ff8h". I restored to whole folder with our dwts to before I created them. and still crashes with 2012. they open fine in 2013.
Dell t1500 i7 8 gb ram Windows 7 64 bit ati firepro v4800
When I start Reference Manager, the program window opens but at the same moment a message window opens saying 'AutoCAD component has stopped working Windows is checking for a solution to the problem...'. A solution is not found, so I can only select 'Close program', and the program closes. I have run Reference Manager successfully a few weeks ago, and after that I haven't installed or removed Autodesk programs. I have Windows 7 64-bit, AutoCAD Mechanical 2012 SP2 and Factory Design Suite Ultimate 2013. I cannot use Reference Manager 2013 (which works) because it saves the files in 2013 format.
In Windows Control Panel / Troubleshooting I found a file with the following text:
Having trouble with AutoCAD 2012 when saving to earlier versions? I can't save it down to any other version except for 2012, without the system crashing completely.
Also, from time to time we get the crash when editing MText.
I bought a new laptop Asus k73SV-TY081V version. When i'm working with autoCAD 2012, my videocard crashes and i get a message: "Display driver Intel Graphics Accelerator Drivers for Windows 7® stopped responding and has successfully recovered"
I just signed up for Creative Cloud and I can't download it. Adobe Application Manager crashes. When I re-run it, all I get is the option to update my copy of CS6. I want Creative Cloud and Lightroom.
Photoshop CS5.1 crashes when trying to launch the application using a cron script. This happens on two different machines running 10.7.3. Photoshop opens without crashing when manually running the bash script. The same script works both manually and as a cronjob on 10.6.8. The cron script:
open -a "/Applications/Adobe Photoshop CS5.1/Adobe Photoshop CS5.1.app"
The crash report: Process: Adobe Photoshop CS5.1 [1332]Path: /Applications/Adobe Photoshop CS5.1/Adobe Photoshop CS5.1.app/Contents/MacOS/Adobe Photoshop CS5.1Identifier: com.adobe.PhotoshopVersion: 12.1 (12.1x20110328.r.145] [12.1)Code Type: X86-64 (Native)Parent Process: launchd [801] Date/Time: 2012-02-21 15:04:07.739 -0800OS Version: Mac OS X Server 10.7.3 (11D50b)Report Version: 9
as described in the title, after choosing 'Text' tool and clicking aposition I like on the new empty image, the entire application shuts downright away.This happens every time.
I have a brand new HP Probook 4530s with the correct requirements to run LT 2012 as well as a certified and tested graphics card and latest drivers, but as soon as I try using offset or trim functions while drawing, my screen goes blank for about 4 seconds and an error message below tells me my Display Driver has stopped working and has recovered.
No matter the screen resolution settings, it still does the same, also the laptop is still cool, so can't be a heat issue.
My work helpdesk has recently installed AutoCad 2012 and my co worker and I noticed that at the start up its loads very slowly and often when we double click on a DWG to open (without Autocad being already open) it crashes.
AutoCAD C3D 2012 has been crashing nonstop over the past 3 days on me whenever I try to "Create a Feature Line from Object". I know that it is a localized problem as a co-worker has been in the same drawing and done grading work without any problems. The error has occurred in multiple drawings.
Product Version: F.107.0.0. AutoCAD Civil 3D 2012 SP1
Every time we have the file dialog boxes open and try renaming or any other explore action beyond changing folder location and hitting the save button AutoCAD LT will hang and crash. We have tried starting the file operation and then just canceling and it does the same exact thing. What happens most of the time is the user will be working on a file and need to save it. They click save as and will go into the folder and right click and rename an existing file to a backup name and then hit save. It proceeds to crash instantly and the document doesn't get saved. It doesn't seem to matter the name of the file or folders or if it is a rename or delete operation. It seems to be related to bring up the explorer options within AutoCad honestly. All of our computers do the same thing.
When I connect with Autocad Map to WMS server (Geoserver) and try to choose Server CS, Autocad crashes. This didn't happen until 2012, and in 2011 work just fine.
Inserting an image (sid, tiff, geotiff, etc) using the image insert command in Map 2012, Or Raster2012 causes program to crash. Have reported to Autodeak, no response....
I am running Civil 3D 2012 and my Hydraflow crashes everytime I run an analysis. I am using a known Q and have input pipe inverts/slopes and pipe sizes. Everytime I try running an analysis I get the following message: Line 1, 2, 3 has no flow. Check pipe size(s) and slope(s). Then the program closes up.
We are running Autocad LT 2012 on the newest fastest souped-up Lenovo Thinkpad W520 available, with Windows 7. If I accidentally direct Autocad to print to a device that is not currently on-line it goes into "not responding" cycle and crashes.
when attempting to print images from elements 11 from the organisor to my cannon 4900 printer the print dialogue failes to create a preview image and then automatically closes the application. seems to happen when i try and print an image that i have printed previously.
Whenever I go to open up Adobe Photoshop (64bit or otherwise) it will load up for a second then crash the next. It doesn't give me error reason why only says it has stopped working and it can't detect a problem so it closes. I have tried to uninstall and reinstall the program but the Adobe Application Manager is also acting weird. When it is opened it freezes and soon crashes saying there is a "Download Error".
One of the clients at my work is experiencing difficulty printing using AutoCAD LT 2012. When he prints, only a blank page comes out of the printer. I have tested the printer and I am sure it works properly. It printed both a Windows test page and a color photo with no problems, which is leading me to believe that he has a setting within the program that should be changed.
My Autocad 2014 crashes EVERYTIME after printing to PDF. What could be causing this problem? Never had this problem with my older 2012 on the same computer.
- Installed pspro_cad_fp_10.0.39.3 update for PSP Server and for PSP Clients.
And now, some drawings we can not open in Inventor 2012. Inventor crashes!
But some drawings we are lucky to be able to open and work with.
Drawings have the same template.
If the drawing is locked (read only) then inventor 2012 can open it without a crash.
If I drag&drop drawing out from PSP onto my Desktop, Inventor 2012 can open drawing without problems.
So we are not able to work with some drawings in Inventor 2012 and PSP 2011.
As the first and quick (and 100%) solution - rollback to Inventor 2010 can cost us about 5 man-days of work. (Because we have done some work in Inventor 2012 allready and will not be able to work with this in Inventor 2010)
When printing from Photoshop CS3(Version 10.0.1) to a brand new Zebra ZXP Series 3 card printer in Windows 7 32 bit I am getting this: errors:
I went from an XP machine to Windows 7(with a video card plenty of memory) and still the same errors. I updated the Zebra printer drivers and firmware. I can test print from the PC just fine. I even tried CS4 with the same result. The user purchased a license for CS3 so I am troubleshooting with CS3 at this moment. My user is way behind in printing id badges for his Fireman and needs this resolved ASAP. I may have to go with Zebra's Card Studio Software if there is no resolution for this Photoshop issue.
I'm doing a program in Visual Basic 2010. In one of the forms I put a button that when clicked must open AutoCAD 2012 and make a drawing in it. The user will decide where to save it.The steps are these:
1. I added the references Autodesk.AutoCAD.Interop and Autodesk.AutoCAD.Interop.Common to the Visual Basic Project. That's OK.
Dim acadApp As New AcadApplication 'Create an instance of an AutoCAD Application AcadApp.Application.Visible = True 'Show the instance of the AutoCAD Application Dim acadDoc As AcadDocument 'Create an intance of an AutoCAD Document acadDoc = acadApp.Documents.Open("C:Respaldo TesisDibujo2.dwg") 'Open a Document called Dibujo 2 'Draw a line Dim PT1(2) As Double [code].....
Before upgrading to 2012 from 2010 (against our will), our publishing tool worked seamlessly with our XEROX 6604. Now, strangely only one user out of seven has the ability to publish a set of drawings without crashing AutoCAD. We are happy that it works on his machine, but it seems very odd that the rest of us are affected when our PCs are the same spec and setup.
All of the proper drivers and firmware are up to date.
I work with a national company that creates criteria drawings for new projects. They recently changed to the 2012 version but they save it down to 2007. There has not been an issue with opening files with my 2009 version until recently. All of the computers in our office are unable to open these new files, although they claim nothing has changed. My CAD will pop up a fatal error and shut down whenever I attempt to open the new files. I downloaded the 2013 trial version and saved the file down to the older version, but that does not work either. Newer versions do not seem to be affected by the files, just my 2009 version. I tried creating a new file in 2013 and saved down to 2007 format. When I try to open it 2009 there is no issue. besides purchasing a new version of AutoCAD?
