AutoCAD Architecture :: 2009 Crashes When Opening File Created In 2012?

Aug 13, 2012

I work with a national company that creates criteria drawings for new projects. They recently changed to the 2012 version but they save it down to 2007. There has not been an issue with opening files with my 2009 version until recently. All of the computers in our office are unable to open these new files, although they claim nothing has changed. My CAD will pop up a fatal error and shut down whenever I attempt to open the new files. I downloaded the 2013 trial version and saved the file down to the older version, but that does not work either. Newer versions do not seem to be affected by the files, just my 2009 version. I tried creating a new file in 2013 and saved down to 2007 format. When I try to open it 2009 there is no issue. besides purchasing a new version of AutoCAD?

View 1 Replies


ADVERTISEMENT

AutoCAD LT :: 2012 Crashes Windows 7 When Opening Saved Drawing File?

Jul 25, 2012

When I open a .dwg file from a saved location auto cad crashes about 35% of the way through loading. I did not have this problem when I was running Windowws XP but now I am running Windows 7.

View 6 Replies View Related

AutoCAD Architecture :: 2009 Projcet-specific Tool Palette Group Not Created

Mar 22, 2011

I'm currently going over the Metric tutorial for ACA 2009. At some point, I'm instructed to right-click the tool palette title bar to select the "project-specific" palette (which should be located among the Design, Visalization, etc palettes). Well, this palette is not there.

I´ve checked the project properties and verified that Project Tool Palette Group is set to Shared workspace catalog. The paths are correct (I'm using Windows 7 x64), etc. When I open antoher tutorial project (Steel Framed Residence_m) the project tool palette is there, but when I create any new project or use the one in the tut, this group/palette is not created.

The profile used to create the project is the default:

C:ProgramDataAutodeskACD-A 2009enuTemplateTemplate Project (Metric)Template Project (Metric).apj

View 1 Replies View Related

AutoCAD Architecture :: Structural Members Not Displaying Correctly 2009 To 2012?

Aug 30, 2012

We've just started using ACA 2012 and have noticed when importing files created in ACA 2009 that structural members do not display properly.  We use the structural column or beam to represent a rainwater or soil pipe and are expecting to see a cut through at the cut plane and nothing else however we are getting a couple of lines that represent the crank in the pipe and I cannot turn them off.  I'm sure that a setting has been introduced somewhere however after two weeks of looking I am still in the dark. 

I've attached a file created in ACA 2009 that displays the problem in ACA 2012

View 7 Replies View Related

AutoCAD Inventor :: Migrate 2009 File To 2012?

Oct 21, 2011

What is the risk Migrating Inventor 2009 files to Inventor 2012?

Do i have to migrate the Inventor 2009 files  to 2010 and up to 2012?

View 2 Replies View Related

AutoCad :: Cannot Uninstall 2009 / Error Opening Installation Log File

May 5, 2012

I'm attempting to uninstall autoCAD 2009, I keep getting a message reading:

- Error opening installation log file. Verify that the specified log file location exists and that you can write to it.

I have located the install log..... no what.

View 4 Replies View Related

AutoCad :: Plot Multiple Drawings In 2009 Without Opening Each Drawing File?

May 26, 2011

Is there a way to plot multiple drawings in Acad 2009 without opening each drawing file?

View 1 Replies View Related

AutoCAD Architecture :: Convert PDF Drawing File To DWG Using 2009 Version

Jun 4, 2013

Is it possible to convert a pdf file created in Autocad back to it's original dwg format in Autocad?  

View 2 Replies View Related

AutoCAD Inventor :: 2012 Crashes Opening Drawings From PSP 2011?

Sep 29, 2011

We have used Inventor 2010 with PSP 2011.

- Recently we have upgrade to Inventor 2012.

- Installed pspro_cad_fp_10.0.39.3 update for PSP Server and for PSP Clients.

And now, some drawings we can not open in Inventor 2012. Inventor crashes!

But some drawings we are lucky to be able to open and work with.

Drawings have the same template.

If the drawing is locked (read only) then inventor 2012 can open it without a crash.

If I drag&drop drawing out from PSP onto my Desktop, Inventor 2012 can open drawing without problems.

So we are not able to work with some drawings in Inventor 2012 and PSP 2011.

As the first and quick (and 100%) solution - rollback to Inventor 2010 can cost us about 5 man-days of work. (Because we have done some work in Inventor 2012 allready and will not be able to work with this in Inventor 2010)

View 4 Replies View Related

3ds Max :: Open 2012 File In 2009 Version Software?

Jun 28, 2012

How can I open Max 2012 file in Max 2009 version software?

View 1 Replies View Related

AutoCAD Architecture :: Opening Older Version Of In 2012 - Doors And Walls

Feb 1, 2013

I am opening a file from 2004 and I am using AutoCAD Arch 2012. When I open the file everything is there, but the doors do not cut through the walls. The doors are still there but are not "anchored". Is there a way to fix this easily? I also lost everything out of my door schedule. I know I will get my schedule back when the doors get anchored back to the wall.

View 1 Replies View Related

AutoCAD Architecture :: How To Get Old Custom Tool Palettes Into 2012 By Opening Content Browser

Feb 7, 2012

I just migrated from 2006 to 2012... I was able to get my old custom tool palettes into 2012 by opening the Content Browser and idropping them.  However I noticed that these palettes are not 'refreshable' like they used to be.  In the Palette Properties it says *This palette is not shared from a catalog*... after doing a search of that message in these forums I found this thread: [URL]....

I followed David's instructions:

1. Created a new Palette Group

2. Created a new palette in that Group

3. i-dropped tools from my custom catalog in the Content Browser onto that new palette.

Still there is no 'refresh' option...???

View 2 Replies View Related

AutoCAD 2010 :: Attach PCG File Created With 2013 In 2012?

Jun 7, 2012

Is it possible to attache a PCG file created with ACAD 2013 in ACAD 2012? I ask because I keep getting the message "the point cloud data file is not valid!". I have tried using both x86 and x64 and get the same error. I have also tried with ACAD 2011 and get the same error. The file was created from a Leica PTS file.

View 2 Replies View Related

AutoCAD Civil 3D :: 2013 Crashes In File Dialog Box If Folders Created Or Edited

Aug 26, 2012

I've tried this on three different machines now, definitely seems to be a bug.  We are creating these on the X drive or Autodesk 360, do n't know if it does with any file folder, but guessing it probably does since the sync is an external process.

Autodesk Infrastructure Suite Premium 2012/2013
Windows 7, x64
Xeon E31225 w/ Quadro 600

View 2 Replies View Related

AutoCAD Inventor :: 2012 Crashes When Opening Part Or Making New Part?

Feb 14, 2012

As soon as I open a piece or try to make a new piece, it crashes! I can open the program but can't use it! I installed it and activated it and I can't use the program at all. I have sent many error reports beacuse I have opened it many times and had it crash many times and have always given my email address. Attached is the Error Report Details screen shot. 

View 3 Replies View Related

AutoCAD 2010 :: 2012 Crashes Loading DWT File?

Jun 24, 2012

why our copies of AutoCAD MEP 2012 seem to hang when loading the default dwt files? On the splash screen it details all the files being loaded and when it gets to the dwt file it just hangs at 0%. In the windows task manager, acad.exe stops using memory (around 90megs) and the cpu stops too. It's get's really frustrating, especially as it only seems to affect our new Dell Optiplex's and a couple of our old Dell Precisions. Some of them work first time every time, no probs. All PC's are Windows 7 Pro 64bit and running the latest service packs for AutoCAD.

View 2 Replies View Related

AutoCAD LT :: 2012 Crashes When Closing File After Plotting?

Apr 22, 2011

I frequently have AutoCAD LT crash on me when I close a file.  It seems to happen most after I have plotted the drawing. 

View 9 Replies View Related

AutoCAD LT :: Cannot Display DWG From 2009 On 2012

Jul 10, 2012

A dwg obtained and developed from autocad 2009 was opened with autocad LT 2012 but could not display on the LAYOUT, although it does show on the MODEL.

I have tried to SAVE AS using the 2012 Autocad LT, but the drawing still wont display  on the LAYOUT.

View 7 Replies View Related

AutoCAD Inventor :: 2014 Crashes On Opening New File

Nov 22, 2013

Yesterday inventor worked fine, I made 3 new parts.But today when I wanted to put these parts together in an assembly and I try opening a new file, inventor crashes?

I still can open projects, but can't create a new project.

PS. I'm using Inventor 2014 Student Version with service pack 1 on Windows 8.1 

View 1 Replies View Related

AutoCAD LT :: 2009 Crashes When Entering Block Editor

Oct 21, 2011

I have a problem with a drawing where I'm working with a certain number of blocks.

The other day Autocad crashed repetedlty when entering the block editor. I double-click on the block, the block definition dialogue box opens and the program freezes - I get the error message "Autocad LT has stopped running..."

I tried reopening the drawing, exploded the block and recreated it - problem solved.

Now this is happening again, except when try to explode and recreate the block using the BLOCK command, when the block definition dialogue box open - the program also freezes.

This only happens when I try to edit one particular block in the drawing.

View 1 Replies View Related

AutoCAD Civil 3D :: Alignments Lost After Opening File In 2012?

Dec 5, 2012

I defined alignments and a surface in Civil 3d, then reopened the same drawing in Autocad 2012 to amend some line work (just because I like drafting in this better).  When I next needed to do an inquiry off the surface, I opened the drawing in C3D, but all the alignments and my surfaces were gone!  Why doesn't C3D retain alignments/surfaces after you've opened a drawing in Autocad 2012?  Would you recommend keeping a separate C3D base drawing for the design work, and another for the drafting? and just xref-ing between the two? 

View 2 Replies View Related

AutoCAD Inventor :: Can Open 2012 Files On 2009

Oct 29, 2011

can you open inventor pro 2012 files on inventor pro 2009?

View 2 Replies View Related

AutoCAD Civil 3D :: Opening Drawings In 2009?

Sep 27, 2013

I just recently had to install 2009 from map 2008.  When I open drawings last worked on and saved in 2008 and open them in civil 3d 2009, I get drawings that freeze up upon opening.  Some will eventually open, showing errors.  Others will never open and just freeze up.

View 2 Replies View Related

AutoCAD Inventor :: Error Message File Needs To Update When Opening 2012

Oct 20, 2011

OK then update. I select never show this message agian ever (my favorite ) - but guess what a it pops back up. Nothing is wrong with the assembly

View 1 Replies View Related

AutoCAD Inventor :: Modified Appearances Library - Now It Crashes On STEP File Opening

Mar 1, 2013

We recently purged our part templates of unused materials and appearances because there were duplicates after our merge between our original 2012 library and 2013 library.  We deleted these duplicates but retained all materials that inventor uses by default, such as the "default" material.

Creating new files causes no problems, however when opening a .STEP file Inventor immedietly crashes and exits to the desktop.  We tried re-assigning the default templates that came with our install of 2013 and we can open STEP files just fine.

We tried uninstalling the latest update (Update 2 for SP1.1) but that did not change the problem.

We are using confirmed STEP files that have opened fine in the past and new STEP files that are freshly downloaded.  NOTE: the same crash occurs with .SAT and .IGES files as well, however we primarliy use STEP files.

This is occuring on two seperate machines, both running Windows 7 64-Bit with i7 processors and 16 Gigabites of RAM.

View 6 Replies View Related

AutoCAD Civil 3D :: Copy Line-work From 2012 To 2009

Sep 26, 2012

I go back and forth between older drawings in 2009 a lot while my current drawings are in Civil 3d 2012.  Is there a way to copy linework from a Civil 3D drawing into my 2009 drawing easily.  I used to be able to copy and paste between drawings but that doesn't work between these versions.  Right now I have to wblock out the linework and open that new drawing and save as 2004 then import it into the old drawing.

View 1 Replies View Related

Photoshop :: CS5 Crashes When Opening EPS File?

Mar 19, 2012

I am having trouble opening an EPS file in Photoshop CS5. Previously, PS wasn't opening at all, but I cleaned up my fonts and I can now open some files. This particular EPS file, however, causes the application to crash every time. I recently had similar trouble with Firefox and Flash and have since upgraded to 10.7. Crash report below:
 
Process:     Adobe Photoshop CS5 [1044]Path:        /Applications/Adobe Photoshop CS5/Adobe Photoshop CS5.app/Contents/MacOS/Adobe Photoshop CS5Identifier:  com.adobe.PhotoshopVersion:     12.0.4 (12.0.4x20110407.r.1265] [12.0.4)Code Type:   X86-64 (Native)Parent Process:  launchd [238]
 
Date/Time:   2012-03-19 21:58:35.446 -0400OS Version:  Mac OS X 10.7.3 (11D50d)Report Version:  9
 
Interval Since Last Report:      7245 secCrashes Since Last Report:       4Per-App Interval Since Last Report:  6379 sec
Per-App Crashes Since Last Report:   2
Anonymous UUID:                  DFE4BD23-8BDD-4E6D-8961-56DE2808DF87 
Crashed Thread:  0  Dispatch queue: com.apple.main-thread

[code].....

View 4 Replies View Related

Photoshop :: CC Crashes When Opening A File

Jul 17, 2013

I am working on a new iMac and a few weeks ago I started to try the Photoshop CC-Tryout-Version. Everything was ok, but today Photoshop stopped opening files and crashes. The Tryout-Version is still valid - the 4 weeks haven't passed yet.

View 5 Replies View Related

Photoshop :: CS4 Crashes When Opening A File?

Mar 7, 2012

Every time I open a file(.psd or .jpg) Photoshop automatically crashes.  here is the reports:
 
Process:     Adobe Photoshop CS4 [6330]Path:        /Applications/Adobe Photoshop CS4/Adobe Photoshop CS4.app/Contents/MacOS/Adobe Photoshop CS4Identifier:  com.adobe.PhotoshopVersion:     11.0.2 [11.0.2x20100519 [20100519.r.592 2010/05/19:02:00:00 cutoff; r branch]] (11.0.2)Code Type:   X86 (Native)Parent Process:  launchd [161]
 
Date/Time:   2012-03-07 12:06:40.302 -0600OS Version:  Mac OS X 10.7.3 (11D50d)Report Version:  9
 
Interval Since Last Report:      74765 secCrashes Since Last Report:       36Per-App Interval Since Last Report:  12711 sec
Per-App Crashes Since Last Report:   31
Anonymous UUID:                  A6CE95B7-8E61-4857-8194-A926A453F5C0 
Crashed Thread:  0  Dispatch queue: com.apple.main-thread
 
Exception Type:  EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000000

[code].....

View 13 Replies View Related

Photoshop :: CS 3 Crashes During Opening A File

Mar 11, 2008

I have a problem with my Photoshop CS 3. Everytime I try to open a file the program crashes producing the message "Photoshop.exe has detectetd a problem".

I'm runnig CS 3 on a Windows XP x64 OS. I have already installed the update to version 10.0.1.

All I could find out was, that it must have something to do with my EPSON printer driver for the EPSON Stylus Photo 2100. If I remove the driver from the system, CS 3 works without crashing.

View 1 Replies View Related

AutoCAD Inventor :: Copy Self Made Material Database From 2009 To 2012?

Oct 31, 2011

Ones every three years we have an upgrade of Inventor. In a few months we have an upgrade from Inventor Proffessionel 2009 to Inventor Prof. 2012. Since we often use special materials in our design process we also create/add the new material in the material database. So here's the question; is it possible to copy the material database (special mades) from Inv Pro 2009 to Inv Pro 2012? It would save us a lot of work!

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved