AutoCad :: Plot Multiple Drawings In 2009 Without Opening Each Drawing File?
May 26, 2011Is there a way to plot multiple drawings in Acad 2009 without opening each drawing file?
View 1 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Opening Drawings In 2009?
Sep 27, 2013I just recently had to install 2009 from map 2008. When I open drawings last worked on and saved in 2008 and open them in civil 3d 2009, I get drawings that freeze up upon opening. Some will eventually open, showing errors. Others will never open and just freeze up.
View 2 Replies View RelatedAutoCad :: Cannot Uninstall 2009 / Error Opening Installation Log File
May 5, 2012I'm attempting to uninstall autoCAD 2009, I keep getting a message reading:
- Error opening installation log file. Verify that the specified log file location exists and that you can write to it.
I have located the install log..... no what.
AutoCAD Print / Plot :: Opening Drawings And Printing Over WAN Is Slow?
Aug 13, 2013Is there a way to increase the access time so printing is faster?
I have AutoCAD 2013 and access drawings over VPN (6 meg pipe).
Both opening the drawings and especially printing them take a very long time.
It takes about 8 seconds to open drawings, due to all the modules loading on the bottom-left of AutoCAD. Printing takes even longer than opening the drawings.
Is there a setting I can change to speed-up access time?
AutoCAD Architecture :: 2009 Crashes When Opening File Created In 2012?
Aug 13, 2012I work with a national company that creates criteria drawings for new projects. They recently changed to the 2012 version but they save it down to 2007. There has not been an issue with opening files with my 2009 version until recently. All of the computers in our office are unable to open these new files, although they claim nothing has changed. My CAD will pop up a fatal error and shut down whenever I attempt to open the new files. I downloaded the 2013 trial version and saved the file down to the older version, but that does not work either. Newer versions do not seem to be affected by the files, just my 2009 version. I tried creating a new file in 2013 and saved down to 2007 format. When I try to open it 2009 there is no issue. besides purchasing a new version of AutoCAD?
View 1 Replies View RelatedAutoCAD VB :: Plot Multiple Drawings Using VBA
Aug 1, 2013I am trying to write some VBA code to print several drawings present in a folder.
I am not a VBA expert. I wrote some little macros in excel but it is the first one in Autocad.
I have a small code that opens a drawing, counts it, closes it and then loops for other drawings.
I have a code that print a drawing by defining some printing parameters.
Separately, both work. But when I call the second one into the loop, I get a error:
"Run-time error '-2147418111 (800100001)':
Automation error
Call was rejected by callee."
I'm using Windows 7 and Autocad 2012.
See my code below:
Option Explicit
Dim filename As String
Dim filepath As String
Dim full_filename As String
Dim i As Integer
Sub print_trial()
[Code] ......
AutoCad :: Plot Multiple Drawings All At Once?
Sep 5, 2007I am trying to plot multiple drawings all at once. I work with many drawing sizes varies from size A to size E. What would be the best way to plot all drawings to 11 X 17 paper no matter what size the drawings are set to? These drawings are not xref or anything. They all are separated files. I tried using Set Sheet Manager; it will only plot to whatever that size is. I want all drawings to be plotted on 11 X 17. I did some research in the forums here and was not able to find what I was looking for.
View 2 Replies View RelatedAutoCAD Print / Plot :: Printing Multiple Drawings
Apr 10, 2006Is is possible to "que" a bunch of drawings to be plotted? I would like to be able to open a drawing and plot it, then while it's plotting, open another drawing and plot it, then another and so on and so on. However, I get an error message stating that another plot is in process and only one plot or publish process can be active at one time. Thus, I'm forced to wait for the last one to complete before sending the next one to the plotter.
View 4 Replies View RelatedAutoCAD Print / Plot :: Printing Multiple Drawings To Single PDF
Jun 2, 2013I am fairly new to AutoCAD. I have a AutoCAD drawing file containing 8 drawings on it. What I would like to do is to print each drawing to a single PDF pages.
View 1 Replies View RelatedAutoCAD Architecture :: Convert PDF Drawing File To DWG Using 2009 Version
Jun 4, 2013Is it possible to convert a pdf file created in Autocad back to it's original dwg format in Autocad?
View 2 Replies View RelatedAutoCAD Inventor :: 2009 Creates XLS File When Saving Assembly Drawing
Jan 19, 2012Inventor 2009 creates XLS file when saving assembly drawing (IDW file).Why? How to get rid of that?
View 6 Replies View RelatedAutoCad :: All Layers Set To No Plot When Opening A Drawing
Aug 1, 2012I've recently upgraded to AutoCAD 2012 and CADS RC 2012 and a really annoying thing has starting happening! Every time I open a new drawing or an existing one, all the layers are automatically set to 'no plot' so print previews come up completely blank every time! I then need to manually go through all the layers setting them to plot or no plot as required!
View 7 Replies View RelatedAutoCad :: Reset Plot Files In Publish Without Opening Each Drawing?
Nov 30, 2011running autocad 2010
Is there any way to reset plot files in publish without opening each drawing indvidually and resetting the plot file?
AutoCAD .NET :: Combining Multiple Drawings Into Single Drawing
Jan 3, 2013I'm fairly new to the AutoCAD API for .NET, and for the last month or so I've been googling about, looking for comprehensive documentation on the Autodesk API (their equivalent of man pages). I've yet to find anything that describes each method and class in the API.
My goal is this: I'm trying to figure out how to copy the contents of all drawings in the same directory into a single dwg file. What subsets of the AutoCAD API should I use to do so?
AutoCAD .NET :: Plot DWG File Without Opening
Mar 19, 2012without using mdi active document is there possible to plot a drawing file from vb.net?
View 2 Replies View RelatedAutoCAD Inventor :: IPart Drawing Template - One Drawing File Versus Individual Drawings
Jun 21, 2013Setting up a tabulated ipart drawing template. Which is better...one drawing file with a table or individual drawings for each tabulation? Also does one method work better than the other when introducing vault?
View 1 Replies View RelatedAutoCad :: Transfer Drawings From 2005 To 2009?
Apr 11, 2011My laptop crashed with 2005 but I still have the disks with my drawings stored in them. The 2005 is so old it won't load onto Win7 in my new laptop. But I do have a friend who has 2009. Can I still access my drawings.
View 9 Replies View RelatedAutoCAD Print / Plot :: Multiple Drawing In Model Space
Mar 12, 2009I'm trying to plot a lot of drawing files that are in model space. We use to do this with batch plot. Is there still a way to do this in 2009.
View 7 Replies View RelatedAutoCAD LT :: Plot Excel Spreadsheet Within 2009
Mar 16, 2012I have been trying to plot an excel spreadsheet within LT2009. See attached files.
Test Adobe.pdf was created using "Adobe PDF" driver, paper size A3. Looks good except for the exta lines running through columns 1 and 9.
Test Dwg to.pdf was created using "dwg to PDF.pc3" driver, paper size ISO A3 (420x297mm). The excel portion looks good but it has cut off the border all around.
Border size is 410mm x 287mm.
Using Acrobat 9 Pro and MS Office 2010.
AutoCAD Visual LISP / AutoLISP :: Script For Moving Drawing In Multiple Drawings?
Apr 23, 2013QT : 1 . I am looking for a script to move the drawing such that the left bottom corner is placed at 0,0 without any manual intervension. This is to done for all the files in a particular folder.
QT : 2 In the same script file I want one block to be inserted also in each drawing. the block is placed in the network drive . so how to copy the path after putting the insert command. I tried -insert; but it is not working how can i give the path in script file.
AutoCAD Print / Plot :: Change Plot Setup To Multiple Sheets For Use With Batch Plot
May 21, 2013I have one drawing per file at model tab. When I need to plot a multiple page file, I use:
Print > Batch Plot.
The problem is that I have to set plot configurations ( plot style table, plot area, paper size, etc) in each file before use Batch Plot.
Now I received 722 files with a wrong Plot Style Table. For this time I change the associated *.ctb file at Plot Style folder, but I will need to associate the right *.ctb to each drawing. It's also common to have to change other properties.
AutoCAD Print / Plot :: Plotting To PDF Drawings Disappear When Go To Plot
May 25, 2011So I have the educational version of ACAD 2012 and this is my first time using that version. My model is done and I formatted my layout with a border and the model to scale in the viewport. When I go to plot to PDF, all I see is the border. I've tried fiddling with colors and viewports but neither of those did anything.
View 3 Replies View RelatedAutoCad :: Map All Electrical Drawings To Printer Without Opening Each Drawing And Selecting New Printer?
May 2, 2013I'm currently using AutoCad Electrical 2010 and we just got a new printer. Is there any way to map all of my electrical drawngs to that printer without opening each drawing and selecting the new printer?
View 7 Replies View RelatedAutoCAD Inventor :: Multiple Users Opening The Same IPT File?
Jun 19, 2013We are currently using Inventor 2013 without Vault and I discovered that multiple users can open the same IPT file at the same time with no warning message or read only access like we get in Autocad. We have 6 designers all using the same Project that is a single user project. We normally don't have more than no person working on the same part or assembly, but it did happen. Two designers opened the same file to make separate changes not knowing that the other was in the file. Not until one of them went to save the file did he know someone else was also in the file. When he went to save the file he then got a warning - "A later version of this file has been saved by (user). Saving the file would overwrite changes, which is not allowed. If you wish to preserve your changes, use the Save Copy As command." In Autocad if you try to open a file that someone else has open you get the warning right away and are forced to open it read only or not at all. Is there a way to set Inventor to do the same thing? Other than using Vault and having to checkin/checkout every file. Our six designers work on an average of 50+ parts per week and many times have multiple files open at the same time to use as reference. Also the shop floor opens our files to use for programming and asking them to checkin/checkout files would not be received well. The shop floor has "read only" rights as determined by our network. Does our network settings determine if more than one person can open the same file?
View 9 Replies View RelatedAutoCAD 2013 :: Plot A Drawing Not A Color CTB File
Oct 30, 2013I am trying to plot a drawing and am using a .ctb file that is not a color .ctb file. When I go to plot the plot wants to plot in color. Is there a setting in Options or somewhere that would be causing this?
View 3 Replies View RelatedAutoCAD Civil 3D :: Importing CTB File Into Plot Settings For Drawing?
Jul 12, 2010I can't remember how to import a ctb file into my plot settings for a drawing?
View 9 Replies View RelatedAutoCad :: Opening A Drawing Exchange File
Sep 27, 2013I am having problems in opening a drawing exchange file sent to me by a friend who is using TurboCad V1.1 In trying to open the file using AutoCad 2000 I am getting the following error message "Invalid or incompatible DXF input - Drawing discarded".
I thought that the whole point of a dxf file was that it could be universally recognized from one system to another.
AutoCAD 2013 :: Plot Styles - Cannot Choose Existing CTB File In Drawing
Apr 29, 2013I received a drawing today that doesn't allow me to choose existing ".ctb" files. Opening the "Plot style table (pen assignments)" from the Page Setup dialogue box. I can choose "Start from scratch" , use a "CFG" file, or "Use a PCP or PC2" file". I do not have any CFG files. I usually use PCP in my "Plot" dialogue box for the plotter pull-down menu.
How to use my plot style "BRhalf.ctb" when plotting this drawing. Also, a "heads-up" on background information on this drawing's plot style options, vs. the plot style options on many other drawings I have plotted.
AutoCAD Civil 3D :: Plot File Names Don't Include Drawing Name / Only Layout Name
Mar 8, 2013my plot file names don't include the drawing name, only the layout name. it used to include the drawing name. i must have changed something but i don't what.
Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0
AutoCAD LT :: 2008 Keeps Crashing On Opening Drawing File
Feb 13, 2013Autocad LT 2008 keep crashing and not responding everytime i try to open any drawing file.i don't know what is the problem since i only using Window XP with 2.67GHz, 3.36 GB of RAM.
View 4 Replies View RelatedAutoCAD Inventor :: Occur Error When Opening A Drawing File?
Aug 5, 2013When I open Inventor, the message "cannot load..." pop-out. Although I still can create the 3D model in Inventor but everytime when I open my existing or new drawing file (.idw), Inventor will occur fatal error and closed.
View 2 Replies View Related