When I open Inventor, the message "cannot load..." pop-out. Although I still can create the 3D model in Inventor but everytime when I open my existing or new drawing file (.idw), Inventor will occur fatal error and closed.
View 2 RepliesI changed from 2012 to 2013 Inventor,
When I open an existing drawing, I have this error msg.
In our office we use autocad 2007 but in our architect office send us drawing on autocad 2012 version drawings we converted all drawings 2012 to 2007 autocad version with drawing true viewer... n than we work smartly..... but when i send drawings..architects office draftsmans open my autocad 2007 version drawings on autocad 2012 version and than show recovery message.. and than drawing close...
View 4 Replies View RelatedI am having an issue opening a SolidWorks file in Inventor. The file is a native SolidWorks .sldprt file. This is the procedure I followed: File-Open in Inventor, changed file type to SolidWorks Files and selected the file on my computer to be opened. I then recieve an HTML error message stating "Error - Translation failed. This version is not supported." I am currently using Inventor 2013. I received the file from one of our sister companies and we were hoping to be able to exchange native files easily using Inventors built in translator.
Any translator or add-in that would work to open files of this type.
I'm getting this error (see attachment) when I try to open an NX file in Inventor 2011. I've downloaded the file from a data transfer site and I can preview the part in the preview window, but it does not open properly. This is the first time this has happened, as I've converted files before with no problem.
View 5 Replies View RelatedI am using Inventor 2012, service pack 1 is installed as is hotfix DL17804781.
When opening certain Catia files, I get a Runtime Error. After I click ok, Inventor closes without the ability to send a crash report. I never had this issue using Inventor 2011, so I am not sure if it is new to 2012 or if I have something else going on.
Autodesk Product Design Suit 2012 sp1
Win 7, 64bit
HP Z400
Intel Xeon W3520 @ 3.07 GHz
16Gb Ram
Nvidia Quadpro 400 512MB
my user has AutoCAD Inventor 2010 and she wants to open a file created using AutoCAD 2007 but always failed with the error message that system running on low memory then Autocad will close. The file can be open without problem using AutoCAD 2007. I'd tried using a computer with Xeon Processor and 4 GB RAM but still facing the same problem so I guessed it's not the hardware problem. Is it a bug and how to solve it?
View 6 Replies View RelatedOK then update. I select never show this message agian ever (my favorite ) - but guess what a it pops back up. Nothing is wrong with the assembly
View 1 Replies View RelatedI am building a custom batch update for our drawings to take border definitions as well as custom iproperties from a current template and push them into a specified inventor dwg file. I built a form for the users to select the template they want to import into a list of files they place in the form. The program opens the template, get's all the information (iproperties, border defs, etc... using the active document to get the document) then iterates through the list of the users doing the following for each file (also getting the active document to get the items in each file): open, replace border definition, insert any non-existent custom iproperties, save and close the file. It works great when I keep the open visible set to true for the files. When I switch the visible property to false for each one of the files I want to open I get an error similar to this: Systems.InvalidCastException: Unable to cast object of type 'Inventor._DocumentClass' to type 'Inventor._DrawingDocument'. at ---- then my button click event here.
Does inventor technically not see a document as an active document if the file is not visible when opened?
The configured Heidi Driver cannot be loaded. Switching to default software.
View 3 Replies View RelatedI am getting a error when I open a specific drawing
FATAL ERROR: unhandled e06d7363h Exception at fel14940.
I have tried to recover the drawing (message says error were found and then I get the same error)
tried the back up file ...no go
tried a back up file from 2 weeks prior, same result.
Have tried inserting as a block to a new drawing... same error.
I get an error every time I open any drawing after it has been saved in 2013. Opening a dwg that was created in an earlier version does not give the error, but after I save it in 2013, it does.
If I create a new dwg in 2013, save it, close it and then open it I don't get the error the first time. But then if I save that dwg again, I will get it the next time I open it.
The exact error is:
One error was found in the drawing file during open. Would you like to cancel this open?It is recommended you cancel the open and run the RECOVER command on the drawing file.
I run the recover command. It says it found, fixed, and erased 1 error. I save, close, and reopen the drawing and the error still appears every time.
when trying to reopen a file from the "recently used" file list? When I try to click on a file from the list it gives me a message stating "error opening file". I know this will happen if the file has been moved to another location, but the files are in the same place as when I originally opened them. None of the files in the list will open anymore. Is this a pathing issue?
View 9 Replies View RelatedEnvironment:
Files stored using SAMBA shares NetgearReady NAS
Two sites connected via WAN
Users using Windows 7 -64bit with Architecture 2014
Mapped drives are used for both site to access NAS, but use different drive letters.
At one point working the projects, users starting getting fatal errors opening from the share. All attempts to get past this failed and I thought the drawing or base files were corrrupt. However, when the files are moved locally to workstation and opened without issue. The users in one office are now working off this files using UNC \serverproject...
The interesting thing, is that users in the other office have no issues dealing with these drawings using on the NAS. The only difference is the WAN and drive mapping letter. This is how they have always worked and never had this issue. The only other thing I will add is they upgraded from 2010 two months ago, but no problems with any other projects.
When AutoCAD is closed and I try to open a drawing from the Windows Explorer I get a fatal error and when AutoCAD is opened before opening the file from Windows Explorer everything works fine. We have this problem with several stations at our office.
View 4 Replies View RelatedWhen i attempt to open a dxf file in autocad it comes up with error messages;
Class not registered
I am having problems in opening a drawing exchange file sent to me by a friend who is using TurboCad V1.1 In trying to open the file using AutoCad 2000 I am getting the following error message "Invalid or incompatible DXF input - Drawing discarded".
I thought that the whole point of a dxf file was that it could be universally recognized from one system to another.
I'm attempting to uninstall autoCAD 2009, I keep getting a message reading:
- Error opening installation log file. Verify that the specified log file location exists and that you can write to it.
I have located the install log..... no what.
I cannot seem to open .dwg files from an email using AutoCAD LT 2010
I get an error saying c:users"username" empoutlookj0814-052.dwg is currently in use or is read only.
Would you like to open the file ready-only?
I can save the file then open it. But the user wants to open the attachment straight from the email.
I've tried changing the attributes on the folder from read only but this doesn't work, tried another profile, again this doesn't work.
It does seem to only effect .dwg files when opening with AutoCAD LT 2010. If someone sends an xls, .doc, .pdf attachment they all open OK, I'm sure this is an AutoCAD LT 2010 issue. I have downloaded and installed both hotfixes / patches from the autodesk website and reinstalled the software but this hasn't worked either.
Even though I run the Dwgconvert function in DwgTrueview 2012 I still can not open the converted file in AutoCAD Mechanical 2012 SP 2. Fatal error with some hex memory addresses displayed. DwgTrueview opens and displays the dwg. just fine. AutoCAD R14 & 2000 open the file with no problem as well.
View 3 Replies View RelatedAutocad LT 2008 keep crashing and not responding everytime i try to open any drawing file.i don't know what is the problem since i only using Window XP with 2.67GHz, 3.36 GB of RAM.
View 4 Replies View RelatedThis error message (see attached) pop up, when I open more than 2 or 3 dwg files in autocad.
I am not sure how to correct it. I have a Windows 7 pro x64 system running Inventor 2012
When I open a .dwg file from a saved location auto cad crashes about 35% of the way through loading. I did not have this problem when I was running Windowws XP but now I am running Windows 7.
View 6 Replies View RelatedI have this file that won't open in AutoCAD Architecture 2012, well let me rephrase that, it won't finish opening. It has 4 or 5 xref's attached. I was able to open this same file using 2010. Through process of elimination I was able to determine that a file that was exported from Revit MEP 2012 was the problem. When that file was detached the drawing would open just fine. To make things more interesting, I am able to open the Revit Export file just fine using 2012. What diabolical combination of event has happened to cause this SNAFU.
View 2 Replies View RelatedIs there a way to plot multiple drawings in Acad 2009 without opening each drawing file?
View 1 Replies View RelatedI am working on a very important print project and the deadline is on tuesday. When I opened my *.psd files last night an error appeared at the end of the "Reading Photoshop format" progress:
Quote:
Could not complete your request because of a programm error.
The files can't be opened anymore...
I really need those files working for I don't have the time to re-do them. Can the files be recovered? (WinXP no-SP, Photoshop CS)
I've applied the Mac Photoshop CS6 13.0.2 update this morning, but now, I cannot open one of my working .psd document anymore, Photoshop raises a "could not complete your request because of a program error" message everytime. I've tried to open it on another workstation, a Windows one, running Photoshop CS5 12.0.4, and it's okay, meaning that my .psd file is not corrupted.
I've tried to disable Photoshop extensions from the extensions manager, but problem persists.
I have created a psd file with GIMP (version 2.6.11) which I have created myself, opened and saved several times.
Today I try to continue my work on this file and I got error 17718 when trying to open the file. I have never opened this file with another application than GIMP.
- How can I prevent it from happening again?- Most importantly: How can I repair the file, so that my work is not lost?
I have GIMP 2.6 installed under Windows xp. When I try to open an .eps file, I get this error:
Error starting Ghostscript. Make sure that Ghostscript is installed and - if necessary - use the environment variable GS_PROG to tell GIMP about its location.
(Failed to execute child process (No such file or directory))
I then downloaded Ghostscript and went thru its regular Windows installation routine. I get the same error in GIMP trying to open an .eps file. How to set the variable GS_PROG and can't find instructions for this variable in the on-line GIMP manual.
I have succesfully installed Autodesk Inventor 2011 (Student License) on my Windows 7 (64-bit) operating system without any errors. I can open Inventor 2011, but when I try to open a new or existing file, Inventor suddenly closes and the 'Autodesk Inventor Error Report'-window opens, giving the following error:
Error: Unhandled Exception
When I go to my project folders and try to open any inventor file, the following message appears:
"Inventor.exe needs to register with he operating system and the following programs (Explorer) are running and may
prevent registration from succesfully completing. Autodesk recommends terminating the offending processes to ensure proper registration. Terminate these processes before continuing with the registration?"
If i cick 'Yes', the problem remains.
I've tried reinstalling, following the instructions carefully (installed as administrator), without success. I installed both service packs. I keep having the same problems, while in the past, it has been working perfectly, but I lost it because of hardware problems, which are now resolved.
Technical Info:
OS: Windows 7 64-bit
Processor: Intel(R) Core(TM) i5 CPU M430 @ 2.27GHz
4,00 GB RAM
ATI Mobility Radeon HD 5650
Is there a way, using VBA to get the sheet size of a drawing without opening the drawing? I know how to get it with the drawing open, so alternatively, is there a way to open all the drawings in a folder, one at a time, then get sheet.size, then close and open the next?
View 3 Replies View Related