AutoCAD Inventor :: Color Style Error On Opening Existing Drawing?
Jul 21, 2013I changed from 2012 to 2013 Inventor,
When I open an existing drawing, I have this error msg.
ADVERTISEMENT
AutoCAD Inventor :: Occur Error When Opening A Drawing File?
Aug 5, 2013When I open Inventor, the message "cannot load..." pop-out. Although I still can create the 3D model in Inventor but everytime when I open my existing or new drawing file (.idw), Inventor will occur fatal error and closed.
View 2 Replies View RelatedAutoCAD Inventor :: Change Style Of Existing Dimension
Oct 14, 2009I'm chasing the syntax on what i hope is a very simple procedure.
We have a project for re-design and manufacture here (Australia) of a machine that has been designed and detailed in one of our US offices. For this reason, we will be wanting all dimensions in mm etc, rather than inch.
My intention is to open the idw(s), update the styles library (done, i think...), change the active standard to "AS Metric" (got the code sorted for that too), and then change all dimensions to AS Metric.
So far i have each of these 3 processes in a different sub, called from a master. But my problem is in changing the style. I could change a dimension's style to match that of another existing style:
Set oGeneralDimensions = oSheet.DrawingDimensions.GeneralDimensions.Item(1)
but I am having trouble setting is to the active style.
My module:
Sub ChangeStyle()
Dim oIDWDoc As DrawingDocument
Set oIDWDoc = ThisApplication.ActiveDocument
Dim oSheet As Sheet
Dim oDim As DrawingDimension
Dim oDimStyle As DrawingStandardStyle
Dim oGeneralDimensions As GeneralDimension
[Code]....
Lightroom :: 4.2 Changes Color Temp When Opening Existing Image
Dec 7, 2012I have installed LR 4.2 two days ago, and have run into a serious problem. When in develop mode, when I click on an image in the film strip, LR opens the image and changes the color temperature dramatically. The blue/yellow slider moves to the far left. I think this is the only change, but didn't check.
The action is not in the history, so I cannot undo it. When I quit and restart, the change is still there. There is no way to recover the pre-existing setting. Can I convert my catalog back to 3.6?
AutoCAD Inventor :: Create Material Style From Existing Mat Library?
Sep 7, 2012I have copied the "Diamond Plate" from the Inventor Apperance Library to my document. Now I want to edit the texture that this style is using.
1. Where is the texture map that this style using located? When I edit the style, I can't tell what is telling it the filename. I have mundged every file on my hd that it could possible be (hoping it would cause an error), but that didnt work either. Another thing I tried was in the QAT "Duplicate as Generic", but that did not show me the texture file either.
2. Is there a way to change the angle of the texture?
AutoCAD LT :: Error Message With Opening Of Every Drawing?
Feb 1, 2012The configured Heidi Driver cannot be loaded. Switching to default software.
View 3 Replies View RelatedAutoCAD Civil 3D :: Fatal Error On Opening A Drawing
Dec 30, 2013I am getting a error when I open a specific drawing
FATAL ERROR: unhandled e06d7363h Exception at fel14940.
I have tried to recover the drawing (message says error were found and then I get the same error)
tried the back up file ...no go
tried a back up file from 2 weeks prior, same result.
Have tried inserting as a block to a new drawing... same error.
AutoCAD 2013 :: Error Opening Drawing Every Time
May 15, 2012I get an error every time I open any drawing after it has been saved in 2013. Opening a dwg that was created in an earlier version does not give the error, but after I save it in 2013, it does.
If I create a new dwg in 2013, save it, close it and then open it I don't get the error the first time. But then if I save that dwg again, I will get it the next time I open it.
The exact error is:
One error was found in the drawing file during open. Would you like to cancel this open?It is recommended you cancel the open and run the RECOVER command on the drawing file.
I run the recover command. It says it found, fixed, and erased 1 error. I save, close, and reopen the drawing and the error still appears every time.
AutoCAD 2013 :: Fatal Error Opening Drawing From Network Share
Dec 12, 2013Environment:
Files stored using SAMBA shares NetgearReady NAS
Two sites connected via WAN
Users using Windows 7 -64bit with Architecture 2014
Mapped drives are used for both site to access NAS, but use different drive letters.
At one point working the projects, users starting getting fatal errors opening from the share. All attempts to get past this failed and I thought the drawing or base files were corrrupt. However, when the files are moved locally to workstation and opened without issue. The users in one office are now working off this files using UNC \serverproject...
The interesting thing, is that users in the other office have no issues dealing with these drawings using on the NAS. The only difference is the WAN and drive mapping letter. This is how they have always worked and never had this issue. The only other thing I will add is they upgraded from 2010 two months ago, but no problems with any other projects.
AutoCAD Inventor :: Style Update (or Style Update Check) Upon Open Of A Drawing?
Nov 21, 2013I am wondering if it is possible to do a style update (or style update check) upon open of a drawing?
The example would be that I have stuff made from way back that the colors/dimension sytles ect dont match the current standard and upon opening a file where they are not current, it would either prompt to update immediatly OR update automatically with no prompting (preferred method).
I am doing a massive amount of updates from old files recently and to save myself 1 - 3 clicks per drawing would be wonderful.
AutoCAD Inventor :: Creating New Drawing Sets From Existing Ones
Oct 24, 2011What it is, my client has asked me create 4 different size transit frames all similar in design. Now I use the skeletal modelling technique to create all my models and this one is very easy to edit, all I have to do is change a couple of sketch dimensions and the transit frame assembly will update to suit any given size.
So, I have completed the drawings set for the first one (There is about 7 drawings in total, each containing about 5 sheets), and I would like to just copy the whole assembly and drawing set for the next frame, and I would just change the dims in the main sketch to suit the new size of transit frame that is required, BUT I dont want to alter the original frame.
Usually to do this, I would create a pack n go then open up that pack n go project in design assistant and change all the names of all the files, then place all these files into another project.
Now doing this is VERY time consuming, as if I am renaming all the files, then I am going through around 1000 files to do so!!!Even after I do all this I still run into some problems with assemblies looking for part files or idw's still picking up and showing the old project assemblies.
Is there an easier, more efficient way of doing this?Also, I would like to add that each of the 4 transit frames would have their own project BUT all 4 projects will be inside 1 parent folder within the vault. This is just the way that we structure or file system as each folder is for the entire job.
AutoCAD Inventor :: Add An Existing Symbol To A Drawing Sheet
Jul 2, 2013Just trying to add an existing symbol to a drawing sheet. I know i'm not formating the point correctly and i get a position error. How can i get the point location of two intersecting lines in my border to hard code the location?
Error:
Error on Line 18 : Argument not specified for parameter 'Position' of 'Public Function Add(SketchedSymbolDefinition As Object, Position As Inventor.Point2d, [Rotation As Double = 0.0], [Scale As Double = 1.0], [PromptStrings As Object]) As Inventor.SketchedSymbol'.
Error on Line 18 : End of statement expected.
DimoApp As Inventor.Application=ThisApplication
DimthisIDW As DrawingDocument=oApp.ActiveDocument
oSheet=thisIDW.ActiveSheet
DimoSymDef As SketchedSymbolDefinition
oSymDef=thisIDW.SketchedSymbolDefinitions.Item("APPROVAL STAMP")myPoint=ThisApplication.TransientGeometry.CreatePoint2d(1, 6)
oSheet.SketchedSymbols.Add(oSymDef) ,myPoint
AutoCAD Inventor :: Fudging Existing Drawing With New Dimensions To Create Variation?
Jan 21, 2013I was just asked to take an existing drawing and "fudge" the drawing with new dimensions to create a variation.So I over rode the dimensions and edited the title block date/drawn by.
I replaced the model reference HOWEVER......I have not been able to CHANGE the title or drawing number (despite the fact that the replaced model has the iProperties that I want).
I suspect this is due to the fact that the drawing is set to NOT update (I have red lightning bolt).
Can I get away with doing what I want without recreating the whole drawing?
Inventor Product Design Suite 2013sp2
Windows 7sp1 64-bit
nVidia Quadro 2000
AutoCAD Inventor :: Changing Properties Of Parts List On Existing Drawing
Jun 1, 2012Is it possible to change a Parts Only parts list on a drawing into a Structured parts list? When a new parts list is created and you select the view it automatically chooses parts and greys out, preventing you from actually changing it manually. Is it possible to get around this without having to start a new drawing?
Inventor 2011
AutoCAD Inventor :: Error Message When Saving To Style Library
Jan 8, 2014info on the following error message when saving to the style library.
View 5 Replies View RelatedAutoCAD Inventor :: 2012 Fusion Error - Realistic Visual Style
Apr 26, 2011I get the following error when I try to launch Fusion from within Inventor (or on it's own):
The application is unavailable. There was an error while initializing the graphics subsystem. This is likely due to one or more of the following: your graphics driver is not configured for "True Color", there was a problem installing the application, the application installation was damaged, or some other problem with the graphics hardware and drivers or the configuration of the application. More detailed information may be included below.
Also, when I try to switch to Realistic Visual Style, it will not allow me to. When I go into Application Options, Hardware, and try to set it for Quality it always goes back to Compatibility.
AutoCAD Inventor :: Import Style Definitions To Drawing?
Aug 2, 2010Any way to automate the import of Style Definition files into the style and standard manager in the drawing environment? If not is there some other way to do it?
View 7 Replies View RelatedAutoCAD Inventor :: Style Conflict - Drawing Template - BOM
Nov 22, 2011I created a drawing template, saved on companies common drive, not local. When I created it I also created BOM to be filtered for certain iproperties. When I go "new" and open a new drawing file from the template I get the message about the style conflict and when open BOM in a new drawing I get default columns not the columns I set up in iproperties.
What is the process of setting up/changing styles?
AutoCAD Inventor :: Error Message On Opening More Than 2 Or 3 DWG Files
Dec 30, 2011This error message (see attached) pop up, when I open more than 2 or 3 dwg files in autocad.
I am not sure how to correct it. I have a Windows 7 pro x64 system running Inventor 2012
AutoCAD Inventor :: Opening SolidWorks File - Error
Apr 5, 2013I am having an issue opening a SolidWorks file in Inventor. The file is a native SolidWorks .sldprt file. This is the procedure I followed: File-Open in Inventor, changed file type to SolidWorks Files and selected the file on my computer to be opened. I then recieve an HTML error message stating "Error - Translation failed. This version is not supported." I am currently using Inventor 2013. I received the file from one of our sister companies and we were hoping to be able to exchange native files easily using Inventors built in translator.
Any translator or add-in that would work to open files of this type.
AutoCAD Inventor :: Error When Opening NX File In 2011?
Oct 25, 2011I'm getting this error (see attachment) when I try to open an NX file in Inventor 2011. I've downloaded the file from a data transfer site and I can preview the part in the preview window, but it does not open properly. This is the first time this has happened, as I've converted files before with no problem.
View 5 Replies View RelatedAutoCAD Inventor :: Custom Color Style
Nov 22, 2011I'm trying to create a life-like model to show a customer, and one of the critical aspects is the color. I'll use Publisher to get the photo finish, but I still have to get the color to look like the real world paint. I've contacted my paint co to see if they could give me RGB values that I could input into the custom color style editor--see attached dialog box. They said that what they have doesn't correlate at all .
2013 Product Design Suite Ultimate
Windows 7 Pro SP1
Xeon X5690 3.5 Ghz processor, 12GB RAM, NVIDIA Quadro 5000
Space Pilot Pro
AutoCAD Inventor :: Save Dimension Style To Drawing Template?
Mar 6, 2013I want to change some values in the default drawing template.
But doesnt succed to save it to an existing template
Like this picture shows about the precision
I have tried to use "Save Copy As Template" but the values goes back to the default settings
how to save dimension style settings to an template?
AutoCAD Inventor :: Runtime Error When Opening Catia File
Apr 2, 2012I am using Inventor 2012, service pack 1 is installed as is hotfix DL17804781.
When opening certain Catia files, I get a Runtime Error. After I click ok, Inventor closes without the ability to send a crash report. I never had this issue using Inventor 2011, so I am not sure if it is new to 2012 or if I have something else going on.
Autodesk Product Design Suit 2012 sp1
Win 7, 64bit
HP Z400
Intel Xeon W3520 @ 3.07 GHz
16Gb Ram
Nvidia Quadpro 400 512MB
AutoCAD Inventor :: Error Opening 2007 File Using 2010
Oct 19, 2011my user has AutoCAD Inventor 2010 and she wants to open a file created using AutoCAD 2007 but always failed with the error message that system running on low memory then Autocad will close. The file can be open without problem using AutoCAD 2007. I'd tried using a computer with Xeon Processor and 4 GB RAM but still facing the same problem so I guessed it's not the hardware problem. Is it a bug and how to solve it?
View 6 Replies View RelatedAutoCAD Inventor :: How To Get Good Resolution In BMP For Color Style
May 15, 2013from In2012, I manged some how to put a .bmp picture in the color style.But as you see, it's not good, no good focus neither the piccture continue from the start to the ene, you see lines cutting the picture.
And when I use a color style that already exist in inventor, it looks so good.The picture that I used is attached ( named 1) I will use a better pic.I want my drawings looks almost like my actuale product.
AutoCAD Inventor :: Error Message File Needs To Update When Opening 2012
Oct 20, 2011OK then update. I select never show this message agian ever (my favorite ) - but guess what a it pops back up. Nothing is wrong with the assembly
View 1 Replies View RelatedAutoCAD Inventor :: 2011 - Error Unhandled Exception When Opening Files
Dec 7, 2012I have succesfully installed Autodesk Inventor 2011 (Student License) on my Windows 7 (64-bit) operating system without any errors. I can open Inventor 2011, but when I try to open a new or existing file, Inventor suddenly closes and the 'Autodesk Inventor Error Report'-window opens, giving the following error:
Error: Unhandled Exception
When I go to my project folders and try to open any inventor file, the following message appears:
"Inventor.exe needs to register with he operating system and the following programs (Explorer) are running and may
prevent registration from succesfully completing. Autodesk recommends terminating the offending processes to ensure proper registration. Terminate these processes before continuing with the registration?"
If i cick 'Yes', the problem remains.
I've tried reinstalling, following the instructions carefully (installed as administrator), without success. I installed both service packs. I keep having the same problems, while in the past, it has been working perfectly, but I lost it because of hardware problems, which are now resolved.
Technical Info:
OS: Windows 7 64-bit
Processor: Intel(R) Core(TM) i5 CPU M430 @ 2.27GHz
4,00 GB RAM
ATI Mobility Radeon HD 5650
AutoCAD Inventor :: Get DWG Sheet Size Without Opening Drawing
Aug 8, 2012Is there a way, using VBA to get the sheet size of a drawing without opening the drawing? I know how to get it with the drawing open, so alternatively, is there a way to open all the drawings in a folder, one at a time, then get sheet.size, then close and open the next?
View 3 Replies View RelatedAutoCAD Inventor :: Opening A Form When New Drawing Created
May 15, 2013I have created a new drawing template using an iLogic Form and Prompted Entry. What I would like is a Rule that is generated when a user opens a new drawing template. The rule that is created would open up the new iLogic Form I created where various Title Block information is entered (Client Name, Client Address, Date, Drawn By, etc... I know you can manually open the iLogic Form that I created via the iLogic tab, but I would prefer the form open upon opening the new drawing. Once comlpeted, the user than imputs the Prompted Entry values (Drawing Name, Drawing Number, etc...).
View 4 Replies View RelatedAutoCAD Inventor :: Change Face Color Style On Pattern
Mar 14, 2012I have a circular pattern. Is it possible to change the face color on the surface of the feature and have it reflected on all the other features?
View 6 Replies View Related