I get the following error when I try to launch Fusion from within Inventor (or on it's own):
The application is unavailable. There was an error while initializing the graphics subsystem. This is likely due to one or more of the following: your graphics driver is not configured for "True Color", there was a problem installing the application, the application installation was damaged, or some other problem with the graphics hardware and drivers or the configuration of the application. More detailed information may be included below.
Also, when I try to switch to Realistic Visual Style, it will not allow me to. When I go into Application Options, Hardware, and try to set it for Quality it always goes back to Compatibility.
When doing presentations I always use Realistic. However today I turned on my machine and wanted to choose this visual style but I can't. I have tried playing around with the options>Hardawre>Quality instead of my regular Performance.
I have finished the 3d interior completed with lighting and everything. Set Visual Style to Realistic. Is it normal that the drawing would turns to only wireframe during the action of 3d Orbit and 3dwalk? Is there a way to change the setting?
I have recently put Auto Cad 2012 on my laptop, but seems to be very slow. While doing this fusion inventor also downloaded.I was wondering could I remove Inventor as I don't use it, without that effecting my auto cad program? All I do is just basic 2D drawings on autocad and need to speed it up. Could I also remove Autodesk 2012 libary?
I have upgraded from 2012 to 2014 but there is a smaller list of visual styles for the Ilogc form. I used to set all forms to "iMaginary" but his is not an option in 2014. Is there a way to copy the form visual style from 2012 to 2014?
i've been plaing with my CUI and found there were a lot more visual styles than i thought so added a few to the dashboard to try out. trouble is, a few have similar names and the same icon and now my realistic that i liked is not available.
now it's kinda semi-transparent.... before it was totally opaque. the same with my 'conceptual'...i can see far too much geometry.
btw i don't have a personal CUI or whatever the procedure is....i just modify the main one when inclined.
i've made a toolabr with ALL the listed visual styles on it and gone through them all but none of them gets it back to the opaque version.
^^^ this is in model space only. viewing from paper space it's the same as it always was.
Using Inventor 2012, up to date on patches, realistic style (which I could use two days ago) is no longer selectable. Also when I go to the Style and Standard Editor, the Realist Appearance section has the warning triangle with the message, "Autodesk Material Library is not available".
I am trying to turn the style library off in inventor 2012, I can't seem to be able to do this. I know in the past version I simply turned it off in the project editor, but I only have the read-write option now. All my drawing settings are saved to my Template, when i open the template, it changes to the style library settings, which I don't want.how to save my settings to style library this is why I have never used it.
Just noticed 'use style library = No?' no longer exists in 2012 only 'read only' and 'read-write' are come uo when you RMB 'use style library' in the Projects dialog, is this correct or have I made an error during installation?
I like "Shaded with edges", and I want the edges black. I have set up the display to this setting in Application Options, Display tab (Use application Settings), and Settings button. Excellent, that's nice. (I have also mapped the num pad 6 to that style, along with 5 is Shaded with hidden edges, and 4 is wire frame).
However, In Inventor 2014 Dynamic simulation, the visual style defaults to "Shaded" (no edges). Ok, i can live with that, I guess. I'll just hit NumPad 6 and it looks good again.
Ctrl-Tab to another open file, make a change or two, come back to the DynSim and - hang on, where are my edges? I can just hit 6 again, but should I have to? I haven't ever seen this display property changed when changing between files before.
I downloaded a .step file from a construction website URL..... It is of a screw. Anyway I want to edit the screw but when I open it, it opens as a weird ipt. It's like the part is an assembly but it's not a logo that I worked with before. Anyway I right click on the Base1 file and hit edit form. When I do that Autodesk Inventor Fusion opens. Is there a way I can edit this part in normal Autodesk Inventor or do I have to learn how to use the fusion program?
I'm trying to convert a 3D model saved as a .dwg in AutoCAD 2011 to a .stp file using Inventor Fusion Technology Preview. I did it once and it worked perfect. But since, every time I save the .dwg as a .stp in Fusion, it scales the object down to 39% of the original.
I am having a rather complex 3D structure i have buid out of solids in AutoCAD and then colored and finnished in Inventor Fusion. The whole image was made for a journal-cover.
I drew the basic structures in AutoCAD and then transfered to Inventor where there have been added some more smooth edges and a rectangular pattern of 1000 objects.
Now in the end i find out that only one single 3D solid is too big and i want to resize/scale it.
It seems impossible for me to do that in Inventor, so I transfered the whole file back to AutoCAD. Now i have the problem that AutoCAD is recognizing my objects now only as "block references". It is easy to resize the object now, but i do not know how to get the block refences become 3D solids again and transfer them back to inventor.
If i just try to transfer the whole data or save and load Inventor isnt opening anything.
I was trying to show another user the Edit in Fusion feature in Inventor 2012 but she doesn't have that ribbon panel. We went into the Part tab in Application Options and Inventor Fusion was selected to Edit Base Solids. We even unselected it, applied it, closed the options and then selected it again. But still there is no Fusion panel under the Model tab when editing a part. Yes, it's installed on her machine. We checked.
The only difference is that she's also installed the 2013 suite, as well. I have the Fusion panel and have not installed any 2013 apps.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014 Dell Precision T1650 Windows 7 Professional SP1 64-bit Intel E3-1270 V2 3.5GHz / 32G RAM Nvidia Quadro 2000, Driver 331.82 Space Navigator, Driver Version 6.17.7
When I double-click on a component in an assembly to edit it, the rest of the assembly becomes transparent (or translucent is a more accurate term). Is there a way to create a visual style (or use some other method) to make the entire assembly translucent like this, just as I'm working with the assembly performing all the usual assembly-type operations? For example, I can operate under the "Shaded" visual style, or the "Wireframe" visual style, or the "Monochrome" visual style.
Is there some way to work with a "Translucent" visual style so that I can see the internals of my assembly as I'm placing parts, applying constraints, etc.?
Is it possible to have an Assembly and/or Presentation as a drawing (.dwg) with a Visual Style of Shaded with Edges? In particular my black .ipt parts look just fine with white/grey edges except when placing the view in a drawing.
I am looking for a way to change the text style used by a table style with Visual LISP. So far I have been able to get the IAcadTableStyle object from the acad_tablestyle dictionary, but there is no property for text style. Is this even possible? Code and results are below.
I downloaded inventor 2012 64bit onto my computer running windows vista. Before I could install it I'd that I needed the windows vista service pack 2. After downloading and installing that it also said that I need the 971138. I also downloaded and installed that. My problem is when I install inventor 2012. It comes up with the following error: Error 1308. Source file not found. C:AutodeskAutodesk_Inventor_2012_English_Win_64bitx64InventorProgram FilesAutodeskInventor 2012Bingranite60md.dll. Verify that the file exists and that you can access it. It gives me the option of either retry or cancel, therefore I cannot complete the installation.
I'm looking for the complete instruction set prepare Visual Basic Studio 2010 Express to program Inventor 2012 Professional.
At the moment, all I've done is to install VB Studio Basic 2010. If I'm not mistaken, don't I have to "configure" VB 2010 Express so it can be used with Inventor 2012?
When I want to edit a solid part in Inventor 2012, I click the "Edit Form" button which automatically launches Fusion. Units are defaulted to cm every time (I don't understand why it can't autodetect units) and the first thing I do is switch them to inches (english). I edit my part then return to Inventor. The part has been resized (smaller by a factor of 2.54) and moved off my original origin. I cannot figure out how to get around this HUGE problem. This has made Fusion useless to me and has drastically reduced the functionality of my ablility to solid edit.
If Fusion is intigrated into Inventor, why does it behave as a totally different product (reversed scroll wheel direction, different units, no refrencing between Inventor features and Fusion, etc.)? It's as if the Fusion programing team and the Inventor programming team met for just long enough to put the Fusion button in Inventor and nothing more.
Any way to change the "View" of parts on file open? When I open an .ipt or .iam the Visual style view is always "Shaded". I want this to be "Shaded with Edges".
I've attached a sample part & drawing of a hollow cylinder with 6 equally spaced radial holes drilled around it.
If you change the depth of the hole you will get a different quantity of holes in the drawing hole note.
I get a hole note quantity of 6 holes which is correct if I set the hole depth to 1". Change the hole depth to 2" and the hole note quantity shown changes to 5. Change the hole depth to 3" and the hole note quantity changes to 4.
I often draw bushings with radial holes like this and have to take care to not let this behavior create a wrong drawing.
Just installed 2012 Pro last week and tried to run FEA today. Everything else is running fine. Started with existing model and had this error. Went to a simple part with rectangle sketch 6x1x.125thk and still receive error. Found multiple issues with mesher errors in forum. So I removed all Autodesk products, cleaned registry, turned off antivirus and reinstalled software and SP1 and still receive error.
