I downloaded inventor 2012 64bit onto my computer running windows vista. Before I could install it I'd that I needed the windows vista service pack 2. After downloading and installing that it also said that I need the 971138. I also downloaded and installed that. My problem is when I install inventor 2012. It comes up with the following error: Error 1308. Source file not found. C:AutodeskAutodesk_Inventor_2012_English_Win_64bitx64InventorProgram FilesAutodeskInventor 2012Bingranite60md.dll. Verify that the file exists and that you can access it. It gives me the option of either retry or cancel, therefore I cannot complete the installation.
Verify that the files exists and that you can access it. Needless to say AutoCad wont open all I get is Retry or Cancel, selecting.
Retry just gets the same error so when I Cancel I then get "Are you sure you want to Cancel" which I select and then I get the message Fatal Error during installation.
This is a downloaded install from Autodesk and I dont have discs available.
DWG TruView,Autodesk Vault 2010 and Autodesk Design all installed OK.
System detail's; OS is 64 bit Windows Home 7 Ver 6.1.7600 with IE8
CPU AMD Athlon 11 P320 Dual Core, 4 gig RAM,500GB HDD running on a new Toshiba Laptop.
I've looked around at various forum's without success.A couple of sites offer what they call a fix but it turns out to be registry scanners.
I've attached a sample part & drawing of a hollow cylinder with 6 equally spaced radial holes drilled around it.
If you change the depth of the hole you will get a different quantity of holes in the drawing hole note.
I get a hole note quantity of 6 holes which is correct if I set the hole depth to 1". Change the hole depth to 2" and the hole note quantity shown changes to 5. Change the hole depth to 3" and the hole note quantity changes to 4.
I often draw bushings with radial holes like this and have to take care to not let this behavior create a wrong drawing.
Just installed 2012 Pro last week and tried to run FEA today. Everything else is running fine. Started with existing model and had this error. Went to a simple part with rectangle sketch 6x1x.125thk and still receive error. Found multiple issues with mesher errors in forum. So I removed all Autodesk products, cleaned registry, turned off antivirus and reinstalled software and SP1 and still receive error.
I get the following error when I try to launch Fusion from within Inventor (or on it's own):
The application is unavailable. There was an error while initializing the graphics subsystem. This is likely due to one or more of the following: your graphics driver is not configured for "True Color", there was a problem installing the application, the application installation was damaged, or some other problem with the graphics hardware and drivers or the configuration of the application. More detailed information may be included below.
Also, when I try to switch to Realistic Visual Style, it will not allow me to. When I go into Application Options, Hardware, and try to set it for Quality it always goes back to Compatibility.
Autodesk has agreed that this code does not work on Inventor 2012 and that the development is working on it. This code is part of the Snippets built in Inventor iLogic Rule Browser.
Ive been trying to install Adobe Photoshop CS4 trial for the past 3 days. The only reason I want to try it is because of its ability to create textures directly on models. But whenever I try to install, I get this error"Adobe Drive CS4Error:Error 1603. Fatal error during installation." Dispite it not saying that Adobe Photoshop CS4 having an error, I still get this screen ....
Op System: Windows 7 Home Premium Processor: Intel Core I7 960 Ram 12.0 GB system 64 Bit operating system. MIcrosoft Excel info: Excel 2010 (14.0.4756.1000) MSO(14.0.5113.5000) Microsoft Office Home and Student 2010 Inventor Info: Autodesk Inventor Professional 2012 54 bit edition Build: 160, release 2012 RTM Date 3/1/2011
When trying to link to excel file get error "Not Implemented". Have tried the registry 'fix' - does not work. Need to get these links working to drive models. This same Excel version works fine for Solidworks which inks perfectly with no issues whatsoever. Inventor has been a problem for 2011,and now 2012 - still not working.
Our tech guys installed 2012 late last year, but suddenly all the 2011 projects are gone. But they still come up on WTC and the ManagedFolder's still fat. Any chance of recovery?
I am using AutoCad LT 2013, 64-bit on Windows 7 Professional. I noticed there is an update available as I was using the program. When I attempted to update Service Pack 1.1, I get this error "A problem prevented the Service Pack from being installed. Contact your system administrator. Error 1603"Â
I am trying to install an old copy of Photoshop 6 that I have and have installed it successfully on this laptop before I had to rebuild it but now I am getting an error when it gets to 71% "Copying ICC profiles" and the error message reads: ComponentMoveData Error Information ComponentMoveData had the following error: Media Name:DataComponent:ICC_ProfilesFile Group: ICC_Profiles_SharedFile:pcd4050k.icmError Number: -106 Has anyone seen this before? I tried on another xp laptop and got the same error message. The disk looks clean with no scratches etc...
i'm having troubles to install lightroom 5.2.  I keep getting this error  As you can see by the screen shot i'm on 10.9 ? I was on 10.6.8 but did the upgrade so I could load lightroom 5 ... and now I'm still getting this message?  i'm on a macbook pro to..Â
I am trying to install Photoshop but it get stuck and the system is hung near at 80%, I waited for more than an hour, tried many times but the same result. My system is a P4. 3Ghz 2GB DDR2 RAM.
I get the following error when I attempt to install Adobe Photoshop CS4.
Installation Error
Installation of the following products has failed:
Adobe Bridge CS4 Adobe Photoshop CS4
To continue installing the remaining options, click continue.
To cancel this installation, click cancel.
I can't figure out why it won't let me install it.
My 32 bit box is running Vista Home Premium with 2 gig of ram and and a dual core processor, at 1.7 GHz each. I also am having trouble with Dreamweaver. I installed it but it gives me an error stating 'Licensing for this product has stopped working'. Error: 147:20. I'm just trying to install the trial...
Last weekend I installed Gimp 2.6.11. The installation went fine. However During the startup process of Gimp I get a message from file wmf.exe that icuuc40.dll is missing. As suggested I removed and installed Gimp again. I still get the message. Gimp works fine.
What is this file and how can get rid of the message?
I have Windows 7. Gimp is installed in Program Files (x86).
I have been using Ulead VideoStudio / Corel VideoStudio since the 4SE version and made all upgrades, up to X4.On April 1, 2012, I purchased then the UG from VS X4 Pro to VS X5 Pro and downloaded the software through the link provided by Corel.
I start the installation, enter the S/N of X5 and X4 (because I purchased an upgrade).But installation always stops with an error message at the following step: "Please wait while we configure Microsoft Visual C+++ 2005 Redistributable"
The error message is: "1: ALLUSERS property is not 1 - this MSM cannot be used for a per-user or fallback-to-per-user install".
What I already tried so far...I already uninstalled VS X4 and used the "VS_Cleanup", but the error persists. Meanwhile, I contacted Corel support, and they recommended to uninstall Microsoft Visual C++ and then to re-install it. I followed their instructions and uninstalled all instances of Microsoft Visual C++ and then re-installed the latest version, i.e. Microsoft Visual C++ 2010 SP1 (x64).However, the same problem persists.
Meanwhile, I tried many other approaches: I moved the installation file (.exe file) to the desktop and tried the installation from there, I tried the installation as another user (equally with administrator rights), I tried to install under Windows Safe Mode (this failed, since some necessary drivers or software was apparently not loaded), removed any remaining traces of VS X4 manually and made a registry clean up, etc.Note also that all latest updates of Windows and related software are made.
I also re-downloaded the installation file, in order to make sure there is no problem with a corrupt installation file.
Video standard: PAL/SECAM, manually selected during the installation process.
when i install corel draw its gives me an error that your setup file has an error it gives crc error and ask me to ignore or abort when i ignore its continue extraction butt when its extract then on installation its give errrors. i install trail version i download from different sites like from corel or downloadcnet.com but its give me same error when extraction
I have purchased & installed Adobe Design Premium CS4 three months ago on a machine in USA office and have not registered it. I had taken a copy of the Adobe Design Premium CS4 DVDs to India. I tried to install the same Adobe Design Premium CS4 on a machine in India office. I am getting the error message as "Wrong serial key".
My PSE 6 ceased to run. I have uninstalled it using the provided uninstaller. I have tried to re-install but keep getting this message:  Microsoft Visual C++ Runtime library runtime error Program E:/Adobe Photoshop Elementssetup.exe
This application has requested the Runtime to terminate it in an unusual way..I have PSE 10 installed and it runs OK BUT I prefer the older v6 which has Twain support for my scanner
During installation of Elements 12under Windows 7, while installing Shared Technologies installation stops with error DF 037, and then reverses the entire process. I found the corresponding errors in the installation log: Unable to delete a number of directories under: c:Program DataAdobeCamera RawLens profiles1.0Tokina I deleted these directories manually, but the problem persists and the deleted directories are back.
An error occored during the installation of assembly component
{5C21D397-1DA5-3749-8C1F-165D21DE9E3E} Â The installation up to that point is reversed. No product is installed. Â Downloading the file for a second time does no solve the problem.
