AutoCAD Civil 3D :: Error 1308 Source File Not Found
Feb 8, 2011
I'm having a problem opening AutoCad Civil 3D 2010.
When I click the shortcut Windows starts configuration and then I get the following error message:
Error 1308.Source file not found;C:autodeskAutoCAD Civil 3D 2010
x86C3DProgram Files
ootCommon Files FolderAutodesk
sharedAdLM|R1en-UShelpBRWstylecommons.css.old.
Verify that the files exists and that you can access it. Needless to say AutoCad wont open all I get is Retry or Cancel, selecting.
Retry just gets the same error so when I Cancel I then get "Are you sure you want to Cancel" which I select and then I get the message Fatal Error during installation.
This is a downloaded install from Autodesk and I dont have discs available.
DWG TruView,Autodesk Vault 2010 and Autodesk Design all installed OK.
System detail's; OS is 64 bit Windows Home 7 Ver 6.1.7600 with IE8
CPU AMD Athlon 11 P320 Dual Core, 4 gig RAM,500GB HDD running on a new Toshiba Laptop.
I've looked around at various forum's without success.A couple of sites offer what they call a fix but it turns out to be registry scanners.
View 9 Replies
ADVERTISEMENT
Oct 26, 2013
Error 1308 Source File not found inventor professional 2013
View 1 Replies
View Related
Apr 13, 2007
i cant get install it becasue this nagging erorr message
View 5 Replies
View Related
May 5, 2009
I created a Dynamic Block that works perfectly, however when I try to add it to my tool pallet, I get an error message that reads "Block XXX is not found in source drawing. If the source drawing is currently open in the editor please save your drawing."
I'm not in the block editor, and I've saved it multiple times before I tried doing this. I've even closed AutoCAD and reopened it and I'm still getting the same results. I've been able to add many other blocks to my tool pallet, but it just will not accept this one.
View 4 Replies
View Related
Jan 29, 2012
I downloaded inventor 2012 64bit onto my computer running windows vista. Before I could install it I'd that I needed the windows vista service pack 2. After downloading and installing that it also said that I need the 971138. I also downloaded and installed that. My problem is when I install inventor 2012. It comes up with the following error: Error 1308. Source file not found. C:AutodeskAutodesk_Inventor_2012_English_Win_64bitx64InventorProgram FilesAutodeskInventor 2012Bingranite60md.dll. Verify that the file exists and that you can access it. It gives me the option of either retry or cancel, therefore I cannot complete the installation.
View 1 Replies
View Related
Feb 7, 2012
I'm getting this error "Run-time" error '48' "File not found: *****.arx" calling functions from VBA (Autocad 2011 64b).
note that same code (VBA & ARX) works fine on 32b env.
View 2 Replies
View Related
Oct 2, 2012
I got this error opening a .dwg in C3D 2012.
Win 7 Enterprise SP1 64 bit
Intel i7 3770 @ 3.40 GHz
16 GB RAM
Civil 3D 2012 SP2
View 5 Replies
View Related
Jan 20, 2012
I have made all my sheets through the Plan Production wizards. When I go to sheet set manager, and select publish to pdf, i get an error saying the following:
ERROR: Layout not found..By using one tab per drawing, seems to publish ok. But we want multiple tabs per drawing, so not really any use to us.
View 2 Replies
View Related
Jan 17, 2013
When trying to make an existing features corridor when I select Target to set the existing surface I get an error
"No target found in the scripts."
I have attached a word file with the error as it appears on the screen.
View 5 Replies
View Related
Aug 27, 2009
When I try to place this ipart, I get an error saying "The server returned the following information: This file is not found on any server in the replicated environment". This child part is already in vault. I tried to delete the child from Vault and I thought that I would just re-generate it. But, when I try to delete the file from Vault, I am given a restriction, but no explanation.
What can I do to get this back in sync with vault?
This is using Vault 2010.
View 1 Replies
View Related
Jul 9, 2013
When I run my corridor I get an error message that says "Failed Target Not Found" it is for the subassembly provided by WisDOT called UrbMedian.
View 4 Replies
View Related
Dec 29, 2012
today i downloaded gimp 2.8.2 for windows 8, but when i tried to run the installer it downloads halfway and then displays an error message.
it says something in the style of: An error occurred when trying to copy a file. The source file is corrupted.
View 7 Replies
View Related
Dec 19, 2013
Strangely, every time I click "save" in CS6 it opens up a 'Save As' window, (which shouldn't happen), then I click save witht the existing file name (it then tells me the doc already exists), I click OK, (and then OK to the next popup window) then get the message that "This file cannot be found". I'm forced to click "ok" and the doument isn't saved. I've tried saving it differently in previous versions and it still doesn't work. I recorded a video of this behavior. You can see it here - [URL]
Why would it be trying to find a file? It seems like an error message when trying to Open a doc, not Save a doc. I can't shutdown my station until I get the document to save.
View 8 Replies
View Related
Jun 6, 2012
i made a survey, about 2000 points with my TSC3R6. I exported my CSV file to a PNEZD file with comma seperated. When i try ti import the file (CSV then i made a .txt), C3D tells me "no point file format match found". Then I opened the txt file, searched for any error that would not let me import my points. The only thing i have found would be the description of my points that sometimes had a space between 2 words (ex: bt balast and ht balast) so i changed it to bt-balast and ht-balast. i looked further and didnt found anything else. heres a sample of my txt file:
11251,5038721.804,370118.600,52.877,69
11252,5038722.437,370118.327,52.980,82
11253,5038725.381,370117.058,54.235,81
11254,5038725.967,370117.395,54.325,bt-balast
11255,5038727.637,370116.899,54.860,ht-balast
11256,5038728.983,370116.602,54.857,balast
11257,5038730.043,370116.150,54.839,ht-balast
11258,5038731.524,370115.635,54.345,bt-balast
11259,5038731.763,370115.674,54.308,81
11260,5038733.529,370114.961,53.606,82
11261,5038734.460,370114.525,53.505,350
Now i have to draw something but i cant even find why importing points fails in C3D.
some usefull informations maybe:
windows 7 32bits SP1
autocad civil 3d 2013 (not yet activated, next week)
View 4 Replies
View Related
Nov 12, 2013
What exactly is this tool used for if you cant change the source file name or the path? and why would the interface let me poke into these fields and give me the option to find and replace if they cnnot be edited
So how can I change the Source File name and path?
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
View 1 Replies
View Related
May 4, 2008
I just opened my corridor drawing for the first time in 2009 and was greeted by this error:
Macro file not found at original path specified in subassembly. Updated macro file location to path defined by AECCCONTENT_DIR environment variable.
I'm not familiar with the maco file and the only post I found relating to this said the AECCCONTENT_DIR environment variable was abandoned in 2007.
View 3 Replies
View Related
Feb 16, 2014
I'm trying to transfer my photos from phone to computer. phone is hooked up to computer. Photoshop says no device found (for source). What do I do????
View 1 Replies
View Related
Feb 28, 2013
I am tryiny to import coordinate file like I have so many times and the Select File box keeps telling me "No point file format match found". I click the proper file format and it shows in the Preview box but the OK box will not go dark so I can clcik on it. The file is a CSv and tried making it a txt with no luck. Using 2012.
View 6 Replies
View Related
Sep 18, 2013
I need to update both the path and the Source file name in Data Shortcuts editor. If I update the path, it looks in the new path for the old file name, and throws an error. If I update the File name, it looks in the old path for the new file name, and throws the same error.
View 6 Replies
View Related
Aug 10, 2012
User received this error after trying to open a 2nd drawing after receiving a fatal error unhandled excpection e0434352h 7c812afbh.
New error messag is: Method not found: "Int64 Autodesk.AutoCAD.DatabaseServices.ObjectId.get_OldId()'
View 2 Replies
View Related
Jun 27, 2011
I have an error that started appearing in my VBA programs since we upgraded to AutoCAD 2012. This problem never occured in our previous releases. The program is supposed to loop through all entities in paperspace and check for entities that are a acBlockReference object.
Below is a simplified version of my program. I get an Element Not Found error on the line noted. Again, this has never happened in any of our previous versions of AutoCAD. Just started with 2012.
Sub Test
Dim blkref As AcadBlockReference
Dim entry As Variant
For Each entry In ThisDrawing.PaperSpace
If entry.EntityType = acBlockReference Then ' <-This is where the Element Not Found error occurs
msgbox entry.name
endif
next
end sub
View 1 Replies
View Related
Mar 11, 2013
I´m having som problems to publish a part in to the Content Center. It´s the first time I´m doing this.
The part is made with parameters and is a little bit more complex than a bolt.
The problem is that I got this message: "There are external dependencies found in the document. Please remove the dependencies then proceed with this comand."
View 4 Replies
View Related
Dec 14, 2011
I have created a bin/vat/tub using sheet metal. I started with a contour flange. I then copied the sketch and pasted into a new sketch off the flange for a contour roll feature. Then a flange, roll, flange, roll, flange and roll. My trouble starts at the last flange. I'm trying to construct the flange exactly as I have created the features before. I set the distance, select the profile (it shows the flange on the screen), hit apply and that's when my message shows up. "Non-tangent curves found in path: flat pattern cannot be correctly created. Edit sketch and add constraints to the curves. The sketch is fully constrained according to the lower right hand corner and the auto constrain button.
View 2 Replies
View Related
Sep 25, 2013
I have this error in my iLogic code for inserting sketch symbols. "Public Member 'ActiveSheet' on type 'Drawing View' not found"
I have declared everything in the code. I dont understand what it cant find.
View 7 Replies
View Related
Nov 9, 2013
I created a solid, shelled it, and then converted to sheet metal. I am now trying to indentify the bends but I am getting the error: Bend 1: Could not build this Bend; No matching faces found.
View 5 Replies
View Related
Apr 16, 2012
when in part building i edit a part and want to save it as a different name i get a error saving xml file and it does not save the new part.
View 3 Replies
View Related
Feb 14, 2013
I need to know the name of the UI font for Photoshop CS2. Upon startup I keep receiving the "UI font not found" error. I have over 1000 ttf and ps fonts and occasionally disable some of them; to keep that piece of Windows XP stuff working corectly. Must have disabled the font. Don't really want to enable all the fonts. The system would crash.
View 4 Replies
View Related
Jan 30, 2009
I have been using the CS4 trial for just over 2 wks now and all of a
sudden I am getting this error.
The specified module could not be found.
C:Program FilesCommon FileAdobeAdobe Version Cue CS4Client4.0.1Version Cue.DLL
When I open a picture I get this message and CS4 closes. I have tried re installing hoping it would find the missing file, no such luck.
I have Vista
I am sort of in a panic...I tried to go resize some pictures to order for a client, so she can have them before she leave town on the 5th and this is what happnes.
I did go down load Adobe reader 9 and it tried up update what seemed like everything Adobe. IDK I had not opened CS4 before this, but the day before it worked just fine.
View 10 Replies
View Related
Aug 13, 2012
3ds Max 2013 start with below error after install V-Ray 2.30.
"failed to initialize , Error code 127 - The specified procedure could not be found."
View 1 Replies
View Related
Jul 18, 2013
When I try to save a drawing, the box to choose the location, how I want to save doesn't show.
View 3 Replies
View Related
Oct 19, 2012
I have run CS4 on my windows Vista pc for years without a problem. Yesterday I downloaded DNG converter 7.2 as I have purchased a Fuji Xpro and needed to be able to process the Raw files - my version of ACR is not compatible. Today I tried to look at an old image processed from a year ago in CS4 and got the error message:
"The specified module could not be found C:programfilescommonfilesAdobeAdobeVersionCueCS4Client4.0.1Ver sionCue.DLL"
I have tried to open many different images from Bridge into photoshop and from the photoshop file menu - photoshop opens with the image, then this error comes up, I click ok and photoshop closes.
View 8 Replies
View Related
