I need to update both the path and the Source file name in Data Shortcuts editor. If I update the path, it looks in the new path for the old file name, and throws an error. If I update the File name, it looks in the old path for the new file name, and throws the same error.
View 6 RepliesWhat exactly is this tool used for if you cant change the source file name or the path? and why would the interface let me poke into these fields and give me the option to find and replace if they cnnot be edited
So how can I change the Source File name and path?
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
Have existing hotel site plan project folder and I copied it to new location and renamed folder and file names I have a grading plan that has spot elevations from data shortcut referenced surface. Is there a way to reference the new revised surface, that has same name and have the elevations update with the new surface and then delete the original referenced surface.
Civil3D 2013
Windows 7, 64 bit
Intel i7 2600 @ 3.40Ghz
16 GB RAM
Nvidia Quadro 600
I’ve recreated and replaced a corrupt drawing, which contained surfaces that were data referenced into multiple files. Is there a way to update the data shortcuts, so other drawings referencing the surfaces are unaffected? I’ve tried moving the corrupt drawing to an archived folder and naming the new drawing and surfaces to match the old. However, I’m not able to repair the broken shortcuts in the other drawings. The surfaces are referenced in a large construction plan set that includes sections, profiles, and numerous labels based on the surfaces – it will be very time consuming to create a new reference in each drawing.
(I'm using Civil 3D 2013.)
i have this drawing which i created data reference to the wrong project in the wrong coordinate system and worked off that. then now i am trying to correct it. so i copied the dtm and did coordinate transformation and got that right. now the model drawing is still linked to the original dtm from the other project folder.
if i remember right back in 2007 version there was a completely built in shortcut editor which allows you to change the path in current drawing. now it's all greyed out. there is no access. so is there a way to bypass this? probably pretty common thing to do. say you want to try different version of the same object to try your design just swap it back and forth.
They should make a right click button on the data shorts in current drawing and says "browse data reference" not show up when only broken reference occurs.
one way i can think off now is copy the files to local. disable network drive, then let it broken reference show up then browse to desktop one then delete desktop one and hopefully it get the broken reference again and not look for the very original one. i think it's probably gonna do that, there is some "hidden" thing stored in the object to point to the original path which not available to users.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
I'm having problems getting super elevation data to transfer to different drawings by means of an alignment data shortcut. I know alignments hold the super elevation data so I've gone into my alignments data shortcut, input my super elevation data, saved and closed. Now when I open my finished grade drawing, reference in my alignment and profiles, then create a corridor from that information, my super elevation didn't transfer with the reference.
I pulled cross sections and it appears is has no clue there is any super elevation data. Also, I tried bringing it directly into the drawing I'm doing my corridors in and it erred saying I must be in the parent alignment drawing. Data shortcuts are pretty much useless to me if super elevation data doesn't transfer.
64 bit Windows 7
Intel Xeon (R) @2.8GHz
6.00GB Ram
Civil 3D 2012
Civil 3D 2012
Intel(R) Xeon W3530 @ 2.80GHz
6.00GB Ram
Windows 7 Professional
I just upgraded to Civil 2011 from 2009 and a drawing I was working in, which had a database attached, is no longer working. Fine. I understand that upgrading may cause some things to not work properly.
So, I try to attach that same database and I get an error message that reads:Failed to create the data source file:
Database2
I tried creating a brand new database with newly imported information and it did not work. I tried creating a brand new database with no information , and still I get the same message.
Is it possible to redirect a data shortcut?
I have a large model containing 40km of pipeline. The pipe network and alignment were then brought into separate drawing via data shortcuts where the sheet layouts and long sections were generated.
The pipeline is now under construction and we need to compile the as-built drawings as the pipeline is constructed. I want to make a copy of the model containing the pipe network and alignment, then update that to reflect the as-built information.
I also want to copy the drawings (containing the layouts and long sections), but these would still reference the model used to generate the construction drawings.
Is it possible to redirect these data shortcuts?
(Using Civil3D 2011) - we could upgrade to 2012 if required.
________________________________________________________________
Dell T3500, Win7 Pro 64-bit, Xeon W3520 @2.67GHz, 6GB RAM, Quadro FX580
Inventor Professional 2011 64-bit
Civil 3D 2011 64-bit
I had a few problems moving a project from 2012 to 2014. After a couple of tries I got everything set except the main alignment. When I originally used the Data Shortcut Editor to change the path of the shortcuts. I noticed that most of the paths were mostly UNC paths. So I replaced them with the current UNC path.
Now when trying to fix the one shortcut I've noticed that there is now a duplicate of the UNC path shortcut and one using the pathed network drive. So there is now a total of 3 references for each shortcut. I don't know yet if this is part of the problem but it doesn't look like it's a good thing.
My first inclination would be to delete all but the newest XML file for each reference.
Not sure what has happens but the dtat shortcuts for the surfaces in this jb now appear twice in the list of data shortcuts the look at the same file ,etc how can I remove these double ups. I tried the Data reference editor there is no delete button. Can I manually edit the xml file?
View 2 Replies View RelatedI cant get this one. I have created an alignment in a drawing and created a shortcut. When I data shortcut that alignment into drawing "A", its all good. Alignment starts at station 10+00. When I do the same data shortcut into drawing "B" the alignment is starting at station 0+83.33. Why?
View 5 Replies View RelatedIs there any way to determine the source drawing of a dref'ed object? I'm not seeing anything in COM or the .NET API's, hopefully I'm just not looking in the right place.
View 5 Replies View RelatedI have a 2011 Civil3D drawing with Data shortcuts in it. I need to replace the source drawing path of the data shortcut with another path. Is there a way to change this either manually or, preferably, programically. At some point we'll need to batch through the drawings and change this path information. Is this information is stored in a drawing dictionary somewhere? If so, where? If not, where?
Updating the .XML data files doesn't appear to affect data links already in the drawing.
I am having an issue with alignments not updating to the latest source drawing. Initially, the alignment source drawing was in File1.dwg. Due to a design change, a few of the alignments were revised in a new File2.dwg. For the first time ever, I used the Data Shortcuts Editor program to repoint the data shortcuts to the new File2 location. By all accounts, it looks like the data shortcut were updated to the new source drawing (File2).
The problem is in some files some of the alignments still source to the File1 location and even when manually synchronizing it still sources from File1. Additionally, it seems random in terms of which alignment and files source to File2, even to the point in some files one alignment will update to File2 and other won't and some alignments will update in some files but not all. Note that I am not the original creator of the files so I don't know much history on the files (no alignments seem promoted however).
What’s the best way for me to get all the alignments to point to the new data shortcut source drawing location?
I have a map that I have scanned that has all the buildings and all the apartment numbers in each building. I have an SQL database that has whether or not each apartment is rented. I would like an automated way of highlighting each apartment number based on whether it is rented, has a depsoit, is vacant, etc. all in different colors. Is this possible with Adobe Photoshop or any of their products?
View 9 Replies View Relatedi am currently using civil 3d 2012. I am having issues with pipe networks and my data shortcuts. when i data shortcut a pipe network into another file, sometimes my structures just disappear after saving and closing out, then reopening - like they were never there.
View 4 Replies View RelatedSo I've got a customer who's upgraded drawings from a previous version of Civil 3D to Civil 3D 2013. One drawing contains data shortcuts to pipe networks, alignments, and surfaces. At the drawing open the pipe networks are updated, but none of the other data shortcuts are. Removing the pipe network data shortcuts allows the other data shortcuts to be loaded normally. Using SYNCHRONIZEREFERENCES updates all of the data shortcuts normally in the darwing. So I strongly suspect the pipe networks are the cause of the issue. Opening a new drawing and creating a data shortcut doesn't exhibit the same issues. Also WBlocking the trouble drawing doesn't work either.
[URL]
I'm running Civil 3d 2010
I have opened a drawing created by someone else and see that it is loaded with data shortcuts and they all seem to be working properly and displaying fine. The problem is that I would like to add some more shortcuts to the project yet I cannot find the folder where they are located on our server. I have opened up source drawings for every one of them and there are no data shortcut folders located in the same path as the source drawings nor in my project file. They have been stored miscellaneously somewhere on my server. I have tried searching by name (*.xml) for the data shortcuts on my server but the names are too generic and I get to many hits to locate the one I need. Is there any way to list a data reference and the program tell you the folder where it is getting it from?
For some reason when I try to "Create Reference" to bring in my Alignment, Finished Ground and Existing Ground I get three different alignment data shortcuts instead of them grouping into one. I am trying to find out where in my workflow this all went wrong.
I have a .dwg that just has my alignment files in it. Then I make a new drawing and data shortcut in those alignments and Surface. I make my profiles and then create the data shortcuts for those. I start a New drawing and try to reference the alignment and profile and I get duplicated that aren't grouped. If you take a look at the two .bmp's you can see what happens.
The Purple highlighted area is how I want it to show up and that one worked just fine. Same work flow. The yellow is what is giving me a hard time.
How do I fix my shortcuts when it says it validated 176 of 79?
I suddenly have errors when processing my corridor. I don't know if this is the problem or if its just another result of SP2.
Civil 3d 2012 SP2
win 7 64 bit
my co-worker can not setup his drawing's data shortcuts. So, we tried to set the working folder. He has no real options for working folders. There is only one project folder showing for him. how to get all of the project folders to display in the set working folder dialogue so we can select the correct project, then select the correct data shortcuts. He is using C3D 2012 on a windows 7 64 bit machine. His folders have black arrows instead of plus signs. I've attached a picture. The Monterey Projects folder should display several hundred project sub folders and you can see we only have the one folder of 2916.
View 9 Replies View RelatedI have been using Dropbox to collaborate with a remote office. The problem we ran into was that for some reason, data references don't work when a drawing is reopened. In other words, when I open a drawing, none of the objects I dref'd into the drawing showed up. In the Toolspace, the objects appear just fine (i.e. no broken reference indications). If I manually synchronize the object, then it shows up int he drawings. If I save and then reopen, the reference is gone again. I have seen some info about Projectwise and the problems with dref's when using that program
View 4 Replies View RelatedIt was in Feb - March 2012. I was then using AutoCAD Civil 3D 2012. I had faced a problem of getting ground data for a large surface by using satellite imageries processed by some government wing of USA (NASA?), have lost track of it.
View 6 Replies View RelatedI have a Drawing "A" that is the source drawing containing the existing ground surface, topographic linework and features, and points in the Survey Database which are under the Survey tab.
I have a Drawing "B" that is the source drawing containing the Design alignment and profile with references to the data in Drawing "A" such as the surface.
If I create additional points for survey stakeout purposes within Drawing "B", will it automatically be included in the survey database in Drawing "A" along with all the other points or is there some procedure in order for me to continue adding additional points into the database from Drawing "B" or any other drawing that references Drawing "A"?
I am using Civil 3D 201...When creating profile data shortcuts, the tree view in tool space incorrectly associates the profiles with several alignments. This appears to be due to multiple alignments having the same object ID. This happens when importing alignments from LandXML (a procedure we use to move alignments from one project to another) into a template after inserting exactly the same xrefs into each new alignment drawing.
The workaround appears to be copying the alignment into a different site, deleting the original alignment, then moving the new alignment back to the original site. Obviously, this changes the object ID so it is more likely to be unique.
Moving C3D projects to a new server, specifically regarding data shortcuts?
For example, current projects live in: \serversharexxxproj_number
Soon, that path will be \A_new_server\shareBproj_numberdesign
Upon internal inspection, the data shortcuts are storing the full path and a relative path. Based on our initial tests, C3D is resolving the path to the source drawing using the relative path, even though the "full path" stored in the data shortcut is invalid.
I don't think we will need to use the "Data ShortCuts Editor" to fix the paths as long as the relative directory structure remains intact.
1. Create or use a surface.
2. Create or use an alignment within that surface boundary.
3. Create or use a Surface Profile along that alignment from that surface.
4. Make that surface profile Static instead of Dynamic.
5. Copy that Surface Profile to a Layout Profile.
6. Copy that Layout profile and Raise all VPIs in that profile by 0.25 ft (3 inches).
7. Create data shortcuts for that surface, alignment, profiles.
8. In a new drawing, reference those Data Shortcuts: surface, alignment, all 3 profiles.
Problem: The Reference to the profile that I raised by 3 inches doesn't reference in Raised. I had to re-create all the profiles in my new drawing to get the raised profile.
I can attach my drawing in which my surface, alignments, profiles reside - where data shortcuts were created, my _Shortcuts folder, and the 2nd drawing.
I am trying to share the surface, multiple alignments, all the profiles with my CAD designer and other team members via Data Shortcuts and need for them to reference in correctly.
I have a rather large project for a roadway reconstruction. Therefore, the existing utilities are in a separate drawing and the existing ground surface model is in a separate drawing. All the above surface items (curb and gutter, asphalt, concrete, signs, sidewalks, landscaping, etc..) are in the master drawing. I then xref'd in my utility drawing and though I would use data shortcuts for my existing ground surface drawing. I took the surveyed triangles (3d faces) from our raw survey drawing and copied them into my surface drawing, created a surface from the triangles, created a boundary and such. So far everything is good. I created the working folder for the data shortcuts for this project and saved the drawing and closed it. I went into my master drawing and clicked on "Create Reference". I did not promote. The reference came though and everything is fine. Now I want to add contour labels in my surface drawing which I did but they do not show up in my master drawing but the contours themselves do. Do I have to promote this drawing into my master drawing so I can create the contour labels in my master drawing? I guess that is fine but the issue is we have small areas of topo that will be added as needed down the road. If I promote the surface drawing into my master drawing then when I add topo to the surface drawing, it wont update in my master drawing.
View 9 Replies View RelatedI created DRefs to an Alignment plus the Existing and Proposed Profiles. I ended up with 3 alignments with one profile attached to each of the second and third alignment. The second and third alignments are name as <Alignmentname> (2) and <Alignmentname> (3). I deleted them an just brought in the profiles but they each created a new alignment.
I searched the board and Google. What I found was that it's recommended to keep the profiles in the drawing in which the alignment was created. I usually do that. But I've been working at a 1:1000 scale and now the Engineer wants the profiles plotted at 1:500. I don't like changing the scale in the drawing so I thought I'd created a new drawing with that scale. It doesn't look like I can do that now.
Is there a way to suppress the synchronization of data shortcuts when opening, regen, importing new shortcuts, etc.? (Similar to field update settings)Civil 3D crashes enough without having add this to it's list of startup tasks.
View 1 Replies View RelatedHave a big subdivision job I want to divide up for maximum collaboration. So I though put each alignment in a separate dwg and dref into another with the corridor model. One big problem the intersection wizard will not lock PV onto the drefed alignments and profiles as they are read only.
Question : How does one work around this?