Photoshop :: CS4 Won't Open - Error Specified Module Could Not Be Found?
Oct 19, 2012
I have run CS4 on my windows Vista pc for years without a problem. Yesterday I downloaded DNG converter 7.2 as I have purchased a Fuji Xpro and needed to be able to process the Raw files - my version of ACR is not compatible. Today I tried to look at an old image processed from a year ago in CS4 and got the error message:
"The specified module could not be found C:programfilescommonfilesAdobeAdobeVersionCueCS4Client4.0.1Ver sionCue.DLL"
I have tried to open many different images from Bridge into photoshop and from the photoshop file menu - photoshop opens with the image, then this error comes up, I click ok and photoshop closes.
I have been using the CS4 trial for just over 2 wks now and all of a sudden I am getting this error.
The specified module could not be found.
C:Program FilesCommon FileAdobeAdobe Version Cue CS4Client4.0.1Version Cue.DLL
When I open a picture I get this message and CS4 closes. I have tried re installing hoping it would find the missing file, no such luck.
I have Vista
I am sort of in a panic...I tried to go resize some pictures to order for a client, so she can have them before she leave town on the 5th and this is what happnes.
I did go down load Adobe reader 9 and it tried up update what seemed like everything Adobe. IDK I had not opened CS4 before this, but the day before it worked just fine.
After successful import, when switching to the Develop module, I receive 'image not found.'The filmstrip at the bottom of the module shows no images. The images are there when I switch back to Library. I have to quit LR4. When I repon the catalog, LR opens to the first image in the Develop module.Mac OS 10.6.8
I am running LR4 ver4.3. All of a sudden I receied an error message stating cannnot switch to module. I have tried all the usual stuff before going out to the web to look for fixes. On adobe's site they recommended 6 things which I did exactly as instructed and still nothing..I am running iMac mountain lion and everything on my computer is up to date.
I have Photoshop 7 installed ands till recently it was running fine but from just day before yesterday I cannot use the filters. Whenever I try to use it it says "Cannot complete action due to error in Module Interface", I have also tried by reinstalling photshop but it doesnot work.
I need to know the name of the UI font for Photoshop CS2. Upon startup I keep receiving the "UI font not found" error. I have over 1000 ttf and ps fonts and occasionally disable some of them; to keep that piece of Windows XP stuff working corectly. Must have disabled the font. Don't really want to enable all the fonts. The system would crash.
When Running Setup.exe it manages to get through it then it opens up a web page called Adobe Setup and then an error message occurs saying "Critical Errors were found in Setup.
If you know how to fix this I Would much appreciate it as I have been wanting to do some designing for a long time.
The default catalog could not be found. Please open or create a new one. I haven't been able to use my program for a while now. Keep getting this error.
When I click "Show Map" I get a blank pane...no map at all. When I try to place a photo on the map, I get an error message: "The address you requested could not be found, please try again." It doesn't matter if it's a point of interest, a city, or even a state or country.
I am getting an error about 10 times each time I open Photoshop. It says "The application has failed to start because MSVCRT10.dll was not found. Re-installing the application may fix this problem".
This does nothing besides lag up Photoshop for me. I have most of my ram towards Photoshop and it still lags like crazy. I was wondering if there WAS any way to fix it besides re-installing.
I just received and loaded my new copy of CS. I had been using Elements at home and PS 6.0 in class. My OS is Windows XP.
I tried to use the Image>Resize>Image Size function, I changed the resolution from 150 to 72 but 149.999 appeared in the box. I also tried to change the Pixel dimensions to no avail.
I brought Elements up which had always worked before and experienced the same thing.
The only odd thing I've noticed when I bring up PhotoShop or PhotoShop Elements is a message "Unable to locate component" then in the box it reads "Application has failed to start because NUVTwain.dll was not found. Reinstalling the application may fix this". This has been displayed for some time now while I was using Elements, I just clicked on it four times and the program loaded. Now it appears in either PhotoShop version. I tried reinstalling Elements some time ago and it didn't solve the problem. I reinstalled CS and it also still has the same message.
Everytime I open up a file in Photoshop, it says, 'Linotype Fontexplorer version fc4 or newer cannot be found'. I recently deleted that program, how can I get Photoshop to stop looking for it?
I have an error that started appearing in my VBA programs since we upgraded to AutoCAD 2012. This problem never occured in our previous releases. The program is supposed to loop through all entities in paperspace and check for entities that are a acBlockReference object.
Below is a simplified version of my program. I get an Element Not Found error on the line noted. Again, this has never happened in any of our previous versions of AutoCAD. Just started with 2012.
Sub Test Dim blkref As AcadBlockReference Dim entry As Variant For Each entry In ThisDrawing.PaperSpace If entry.EntityType = acBlockReference Then ' <-This is where the Element Not Found error occurs msgbox entry.name endif next end sub
I'm getting this error with GIMP 2.8.4 on Windows 7:
(executable name) - Entry Point Not FoundThe procedure entry point __gxx_personality_sj0 could not be located in the dynamic link library libstdc++-6.dll.
Where (executable name) is any of the following: web-page.exehelp-browser.exefile-pdf-load.exe
A search turned up [this page][URL] ...., but the problem seems to be with libatk instead.
So I searched my C drive for "libstdc++-6.dll" and found three copies of it:
Not wanting to mess with any files in the GIMP's directory, I renamed NifSkope's copy, but the error persisted. I also removed all plug-ins from my user directory as mentioned in the other thread.
It seems that the GIMP is still functional, but it's quite annoying having to click "Ok" three times every time I start the program.
I have a folder of around 6GB worth of photos (all in JPEG format, and all taken using Nikon D7000 on the same day), then when I imported them into LR4.3, only around 100+ were imported. I then tried to import the remaining photos, but an error came out an said "no photos or videos were found to import".
I have made all my sheets through the Plan Production wizards. When I go to sheet set manager, and select publish to pdf, i get an error saying the following:
ERROR: Layout not found..By using one tab per drawing, seems to publish ok. But we want multiple tabs per drawing, so not really any use to us.
I´m having som problems to publish a part in to the Content Center. It´s the first time I´m doing this.
The part is made with parameters and is a little bit more complex than a bolt.
The problem is that I got this message: "There are external dependencies found in the document. Please remove the dependencies then proceed with this comand."
I m receiving the following error on all projects whether they be existing or newly created. I am getting this error on Revit 2013 and Revit 2014. To reproduce all I have to do is try to delete ANY object in the model. "No circuit errors found".
I have created a bin/vat/tub using sheet metal. I started with a contour flange. I then copied the sketch and pasted into a new sketch off the flange for a contour roll feature. Then a flange, roll, flange, roll, flange and roll. My trouble starts at the last flange. I'm trying to construct the flange exactly as I have created the features before. I set the distance, select the profile (it shows the flange on the screen), hit apply and that's when my message shows up. "Non-tangent curves found in path: flat pattern cannot be correctly created. Edit sketch and add constraints to the curves. The sketch is fully constrained according to the lower right hand corner and the auto constrain button.
Verify that the files exists and that you can access it. Needless to say AutoCad wont open all I get is Retry or Cancel, selecting.
Retry just gets the same error so when I Cancel I then get "Are you sure you want to Cancel" which I select and then I get the message Fatal Error during installation.
This is a downloaded install from Autodesk and I dont have discs available.
DWG TruView,Autodesk Vault 2010 and Autodesk Design all installed OK.
System detail's; OS is 64 bit Windows Home 7 Ver 6.1.7600 with IE8
CPU AMD Athlon 11 P320 Dual Core, 4 gig RAM,500GB HDD running on a new Toshiba Laptop.
I've looked around at various forum's without success.A couple of sites offer what they call a fix but it turns out to be registry scanners.
