AutoCAD Civil 3D :: XML File Error
Apr 16, 2012when in part building i edit a part and want to save it as a different name i get a error saving xml file and it does not save the new part.
View 3 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Error Saving File
Jul 18, 2013When I try to save a drawing, the box to choose the location, how I want to save doesn't show.
View 3 Replies View RelatedAutoCAD Civil 3D :: Error When Importing CSV File Into Geotechnics
Dec 18, 2013I get the following error when I try to import a comma delineated CSV file into Geotechnics 2013. When I first ran Geo technics I received 15 errors. I made changes to the csv file and now I get 15 errors in a different location.
I've included the 2 CSV files.
Example of the error message.
Error 0 The CSV appears to be corrupt near record '332' field '3 at position '1044'. Current raw data : '
1020 SB,29,34,GRAVELLY SAND medium grained gray waterbearing medium dense
1020 SB,34,36.5,GRAVEL WITH SAND gray waterbearing medium dense
1020 SB,36.5,41.5,GRAVELLY SAND medium grained gray to brownish gray waterbearing loose to medium dense
1020 SB,41.5,52.5,SAND WITH GRAVEL medium grained gray waterbearing medium dense
1020 SB,52.5,58,SAND a little gravel fine to medium grained brownish gray waterbearing medium dense
1020 SB,58,63,SAND WITH GRAVEL medium to fine grained gray waterbearing dense a lens of fine grained sand with silt
[code]...........
AutoCAD Civil 3D :: Error Connecting To HEC RAS-generated SDF File?
Nov 7, 2013I have a HEC RAS model which I ran a steady flow simulation on, and then I tried to use the GIS Export button to get a .sdf file. When I tried to connect to the .sdf file in Civil 3D, I got these errors:
Failed to connect.
Failed to open FDO connection.
File is not an SDF file, or is an SDF file with an unsupported version.
An error occurred during SDF database access.
I played around with the settings I chose when I exported in HEC RAS and couldn't get any different results.
AutoCAD Civil 3D :: Fatal Error When Defining Surface With ADF File
Aug 21, 2013I have downloaded ArcGrid (ADF) files from the USGS and am trying to define a TIN surface in Civil 3D with those files. I have done this in the past without difficulty but now I get a fatal error and the system crashes in the middle of the process. The ADF files are large, approximately 465 meg, and cover an entire USGS quad area. Is there any tricks or sollutions that would allow me to use this data source to create surfaces without my system crashing?
The system I am using is a Dell Intel Xeon CPU, W365@3.20GHz with 24 GB RAM, 64 Bit OS.
AutoCAD Civil 3D :: Part Builder / Error Saving XML File
May 11, 2012I am trying to make parts in part builder but when I try saving I get the error message "error saving XML file". I tried changing the setting on the files for saving but that doesn't seem to work.
View 5 Replies View RelatedAutoCAD Civil 3D :: Error 1308 Source File Not Found
Feb 8, 2011I'm having a problem opening AutoCad Civil 3D 2010.
When I click the shortcut Windows starts configuration and then I get the following error message:
Error 1308.Source file not found;C:autodeskAutoCAD Civil 3D 2010
x86C3DProgram Files
ootCommon Files FolderAutodesk
sharedAdLM|R1en-UShelpBRWstylecommons.css.old.
Verify that the files exists and that you can access it. Needless to say AutoCad wont open all I get is Retry or Cancel, selecting.
Retry just gets the same error so when I Cancel I then get "Are you sure you want to Cancel" which I select and then I get the message Fatal Error during installation.
This is a downloaded install from Autodesk and I dont have discs available.
DWG TruView,Autodesk Vault 2010 and Autodesk Design all installed OK.
System detail's; OS is 64 bit Windows Home 7 Ver 6.1.7600 with IE8
CPU AMD Athlon 11 P320 Dual Core, 4 gig RAM,500GB HDD running on a new Toshiba Laptop.
I've looked around at various forum's without success.A couple of sites offer what they call a fix but it turns out to be registry scanners.
AutoCAD Civil 3D :: Error / The Microsoft Jet Database Engine Cannot Open The File
Aug 28, 2012We are using AutoCAD Civil 3D Land Desktop Companion 2009 on all machines and one of our machines is getting the message "Error opening Point Database" and then gives the project file pathcogopoints.mdb.
It also gives the message "The Microsoft Jet database engine cannot open the file. It is already opened exclusively by another user, or you need permission to view its data." It is not opened by another user and permissions have been given for all machines to access these files.
Background information: We move older projects to an external hard drive for archiving and occasionally need to access them as the need arises. We have done this successfully for some time without issue, but now one of our machines is giving the above error. The other machine, which the external hard drive is connected, does not have this problem. We tried moving one project file back to the original location and it seemed to work okay, but another file did not. Some files were created using an older vrsion of AutoCAD, but that has not been a problem with opening them in the past. All sharing permissions to the external hard drive have been checked and seem to be working properly.
AutoCAD Civil 3D :: Part Builder - Error Saving COLE File
Dec 30, 2013I'm trying to do a save as of a previously created and validated part. When I create a new chapter and try to save the part in the new chapter, I get an error message saying "ERROR SAVING COLE FILE". What is a COLE file and why am I getting this error? Could there be a problem because the original part was created in 2013, and now I'm working in 2014?
We recently changed the location of our CAD Standards (such as Pipe Network Catalog). Can I simply copy the Pipe Network Catalog and paste it to the new location and have everything work the same or do I have to do something special?
AutoCAD Civil 3D :: FATAL ERROR - Cannot Write To Undo File (probably Disk Full)
Jul 19, 2012I am using Civil 3D 2011, and the last 2 days I have been running into this issue. I tried google, and the most recent item google brought up was from May 2011, so I am coming here.
I am trying to import a tab from another drawing, and it does not matter which tab or what drawing, I am getting this issue.
AutoCAD Civil 3D :: Importing ASCII File Error / Rounds Elevation To Nearest Foot
Aug 12, 2013I am battling is bringing in LiDAR files from ArcGIS. I have tried TXT and ASC, and they both seem to only maintain the elevation to the nearest foot, as you can see in the attached image.
What is strange, is that when the file is brought back into GIS, this issue is a problem. Is there a setting for reducing the amount of units when importing data? The text file as I shared has data to the thousandth.
AutoCAD Civil 3D :: Data Short Cutting In Grid Surfaces Causes Fatal Error - ASC File
Mar 20, 2013Having a problem with data shorcutiing in a surface created from an ascii file.
I am creating the surface as a grid surface. Itcreates the data shortcut. However when data shortcutting into a new file. Boom! (see above)
Using Civil 3D 2013 - SP1
Civil 3D 2014 (SP1)
Win 7 Pro x64
DELL Precision Workstation T3500
Intel Xeon 3.3GHz (w3680)
24Gb Ram
NVIDIA Quadro 2000 (1GB)
AutoCAD Civil 3D :: Part Builder - Save Part Family / Error Saving XML File
Aug 17, 2013I am working on the part builder tutorials for AutoCAD Civil 3D 2014. Every time I click "Save Part Family", I get the error message "Error Saving XML File".
View 4 Replies View RelatedAutoCAD Civil 3D :: ERROR 517 / Error In Reading TR-20 Project Data
Oct 25, 2012I'm getting the following error:
ERROR 517 : Error in reading TR-20 project data.
but when I compare my raingage input to the one in samples it appers to be correct. Is there someplace else I need to be checking?
AutoCAD 2013 :: Error Opening File From Recently Used File List
Mar 18, 2013when trying to reopen a file from the "recently used" file list? When I try to click on a file from the list it gives me a message stating "error opening file". I know this will happen if the file has been moved to another location, but the files are in the same place as when I originally opened them. None of the files in the list will open anymore. Is this a pathing issue?
View 9 Replies View RelatedAutoCAD Inventor :: ILogic Error Cannot Find Excel File After Saving File As Template
Dec 6, 2012I'm linking an excel file to an .ipt file with iLogic code determining if the Material type is a certian value it will find the correct material thickness. These file work great when working on them thru Vault but when I "Save As Template" and create this file where our other template files are located (not Vault) this fuction does not work. I have realized that I had to place the a copy of the excel file in the same file folder as the template ipt, but even this does not fix the issue.
I recieve this error:
Error in rule: Material, in document: Part6
'MWW Materials (Inventor).xlsx' could not be found. Check the spelling of the file name, and verify that the file location is correct.
If you are trying to open the file from your list of most recently used files, make sure that the file has not been renamed, moved, or deleted.
It seems completly countintutive that just saving the file as a template file would cause this not to work when all files that are required are located in the same file folder. Maybe I need a reference to the excel document within the iLogic code.
Photoshop :: Error :: Could Not Open Due To Unexpected End Of File Error Messages
Feb 25, 2008I am getting a Could not open due to unexpected end of file error messages on a bunch of jpg's I am receiving via email. The files open in Microsoft Office Picture Manager.
View 2 Replies View RelatedPhotoshop :: Error :: Unable To Save (file Name) Because Of A Disc Error
May 7, 2007I'm trying to create a digital layout in PSCS version 8.0, and when I go to save the psd file (very early stages of the creation...its not very large yet) I get an error that says "Unable to save (file name) because of a disc error". I've never seen this before and am trying not to panic, but I'm on a deadline! LOL And am running behind as usual!
I am using an older mac, and I'm pretty dang maxed out on Gb...gotta clean up some files, but having a hard time finding a free dup file finder for macs...so I'm procrastinating, basically. Could the fact that I've got very little Gb available left have something to do with this?
Photoshop :: Error :: File Will Not Open Due To A Program Error
Apr 1, 2009I have been re-saving many of my PSD files using CS3 image prosesssor with compatibility mode turned off. They have simply been saved again as PSD files into a different folder - no changes to the original PSD files. This has worked well and reduced file sizes by up to 50% (I had compatibility mode turned on previously).
of the 60 files I have processed, 3 will no longer open , I get a message that says "file will not open due to a program error."
these files have only ever been used in CS3. , they are quite large
from just under 1GB to 1.5GB, however other similar large files have processed successfully. I have re-tried without success.
I still have the original files so no data loss is involved.
Photoshop :: Error Message :: This File Contains File Info Data Which Cannot Be Read And Has Been Ignored
Feb 8, 2009After I save a file for "Web & Devices," when I open it, it returns this message, "This file contains file info data which cannot be read and has been ignored." Will this cause any problem with the file once I place it in the website I'm building? I've never seen this message before on a photo I've edited. The changes I made involved color correction.
View 9 Replies View RelatedGIMP :: An Error Occurred When Trying To Copy A File / The Source File Is Corrupted
Dec 29, 2012today i downloaded gimp 2.8.2 for windows 8, but when i tried to run the installer it downloads halfway and then displays an error message.
it says something in the style of: An error occurred when trying to copy a file. The source file is corrupted.
Photoshop :: Error / The File Contains File Info Data Which Cannot Be Read And Has Been Ignored
May 31, 2012We have been sending images out to contractors, and sometimes when they come back the files are having this error:
the file contains file info data which cannot be read and has been ignored
When I then try to Photoshop Script the file info it throws errors.
Illustrator :: Error / The File Is Not Readable When More Than One File Open
Feb 20, 2013Get this error when I try to open more than one file. Happens on different files, but especially on jobs that have side panels on packaging. The files have placed .psd images. Happens on different computers (10.6 & 10.8.2).
Can get the file open usually by closing the othere open file, but then is hard to copy and paste between files. Sometimes I get this when trying to open one file, but restarting Illustrator usually fixes this.
Have tried working directly from the hard drive, and still get this problem. Does to follow an exact pattern, can try to open file a, then b one day thsi will work another will fail. Seems like something is corrupting the memory, and usually happens with more complex files. Happens in CS5 & CS6, though I mostly work in CS5.
AutoCAD Civil 3D :: Getting Surface TIN Error
May 16, 2012We have created a surface made from corridors & breaklines. During the initial surface creation process the surface appeared to be fine, but as we went thru and started doing edits and adjustments of the corridor the surface is starting to added erroneous points that are created spikes in the surface. The attached image shows what the surface is doing.
View 3 Replies View RelatedAutoCAD Map 3D :: Error Connecting MDB File
Jun 5, 2012I have an older water line project that was connected to the file water.mdb. I am trying to connect the dwg to the mdb and am getting an error. I have enclosed a screen shot of the error. FYI i am using 2011 Civil 3d, and the dwg was originally done in Autocad Map. (2005 I think) .
View 6 Replies View RelatedAutoCAD Civil 3D :: File Dates Shown Incorrectly In Open File Dialog Box
Apr 24, 2013I'm using Autocad Civil3D 2011, Version 3. Just yesterday I noticed that the file date shown in Autocad's open file dialog box shows an earlier time than Windows Explorer, which shows the file date and time correctly. When I enter the "time" command on the autocad command line, the correct time is shown for the "last updated" time.
For example:
The Autocad open file dialog box shows the file having a time/date of 4/23/2013 3:54 PM
Windows Explorer shows the file having a time/date of 4/23/2013 4:10 PM
"TIME" command at autocad prompt returns the following:
Current time: Wednesday, April 24, 2013 3:55:35:454 PM
Times for this drawing:
Created: Thursday, March 27, 2008 5:49:57:104 PM
Last updated: Tuesday, April 23, 2013 4:10:56:299 PM
Total editing time: 17 days 15:31:26:967
Elapsed timer (on): 17 days 15:31:26:967
Next automatic save in: 0 days 00:09:58:237
I rebooted and restarted autocad, and resaved my file with the same results (although with different times-but again the autocad open file dialog box showed an incorrect, earlier time). I have never had this problem before, and it is driving me crazy as I usually sort my files by date to assure that I am working with the latest file.
AutoCAD Civil 3D :: Load Template File At Start-up Instead Of Misc Drawing File
Apr 4, 2012How to set civil 3d 2012 to automatically load your templete file at start-up instead of a misc. drawing file with no styles or anything.
View 2 Replies View RelatedAutoCAD Civil 3D :: Relative File Location Reference For Point File
Apr 2, 2012I have a surface, to which I've added data from a ENZ file. No problems - I had a workable surface. I want to be able to work on the drawing at home as well as work. So I brought home the DWG as well as the ENZ file thinking that if both were in the same directory, it would work OK. But I get an error saying the Point file can't be found. I can't see any way to make the file reference relative, rather than absolute.
View 5 Replies View RelatedAutoCAD Civil 3D :: LAS LiDar Import Keep Getting Error?
Dec 20, 2013In Civil 3D 2014 while import .las or .asc file using point cloud I keep getting an error in processing data message.
I have in the past brought in the data successfully (2012, though not often)?
Datum and projection are correct, the data goings in to ArcGIS(had GIS group five the file a try).
The error message in not any more specific than "there was an error processing data"
AutoCAD Civil 3D :: Error When Plotting By Window?
Mar 11, 2013When Civil 3D 2013 came out I downloaded it and installed it. I imediately discovered that when selecting my window during plotting by window, if I zoomed or panned I would not be able to pick any points and would have to hit escape SEVERAL times to get it to exit out of the selection command. AutoCAD Civil 3D 2013 Hotfix 1 solved the problem and all was good.
When our office decided to all move to 2013 last month (DEC 2012) I installed it on the workstations then installed the AutoCAD Civil 3D 2013 Service Pack 1 skipping the hotfix. I assumed it was included (WHICH IT STATES THEY ARE IN THE README). Sadly I was wrong because we are experiencing the same issue all over again. All of our workstations that installed 2013 and then SP1 without installing the Hotfixes.
I have tried to install Hotfix 1 on these workstations but it doesn't install on the SP1 version AND there is no way to uninstall SP1 without uninstalling Civil 3D all together.
We need this to get fixed sooner than later because it is a major hassel to lock up everytime we go to plot.
AutoCAD Civil 3D :: Fatal Error When Trying To Plot?
Nov 12, 2013I am currently using ACAD Civil 3D 2014. When I am in paper space and try to plot I get a Fatal Error before I even get to the plot menu. This is only happening in 2 specific drawings and I've done a purge, audit and drawing recovery. With 8GB of Ram there should be more then enough to at least plot a 5MB drawing.
View 4 Replies View Related