AutoCAD Civil 3D :: Error When Importing CSV File Into Geotechnics
Dec 18, 2013
I get the following error when I try to import a comma delineated CSV file into Geotechnics 2013. When I first ran Geo technics I received 15 errors. I made changes to the csv file and now I get 15 errors in a different location.
I've included the 2 CSV files.
Example of the error message.
Error 0 The CSV appears to be corrupt near record '332' field '3 at position '1044'. Current raw data : '
1020 SB,29,34,GRAVELLY SAND medium grained gray waterbearing medium dense
1020 SB,34,36.5,GRAVEL WITH SAND gray waterbearing medium dense
1020 SB,36.5,41.5,GRAVELLY SAND medium grained gray to brownish gray waterbearing loose to medium dense
1020 SB,41.5,52.5,SAND WITH GRAVEL medium grained gray waterbearing medium dense
1020 SB,52.5,58,SAND a little gravel fine to medium grained brownish gray waterbearing medium dense
1020 SB,58,63,SAND WITH GRAVEL medium to fine grained gray waterbearing dense a lens of fine grained sand with silt
[code]...........
View 2 Replies
ADVERTISEMENT
Aug 12, 2013
I am battling is bringing in LiDAR files from ArcGIS. I have tried TXT and ASC, and they both seem to only maintain the elevation to the nearest foot, as you can see in the attached image.
What is strange, is that when the file is brought back into GIS, this issue is a problem. Is there a setting for reducing the amount of units when importing data? The text file as I shared has data to the thousandth.
View 4 Replies
View Related
May 23, 2013
WS with R2013 & R2014 installed side by side.
R2013 is stating on start up that the Geotechnics module has been loaded and displays the Tab for it.But I haven't installed the Geotechnics module for 2013 yet and it doen't work.
View 2 Replies
View Related
May 30, 2013
I am trying to import PTX or LAS files into Civil 3D and keep getting coordinate errors. Meaning, the scan data comes in at the right size (I've verified dimensions in RealityLINx) but for some reason the scans keep coming in close to the 0,0,0 point. I have tried two seperate projects, one with arbituary coords (7000, 7000, 600) and another with state plane coords (NAD27, Zone 5).
I have tried two ways... Through the Prospector using the CREATEPOINTCLOUD command. The scan data is in metric units and I have not found a way to convert the scan data, in Civil 3D, to feet units.
The other way I have tried is through the POINTCLOUDINDEX command. This command will convert my PTX or LAS files into a PCG and upon insertion into the drawing, I am able to give it a scale factor to try and convert to feet.
Like I said, I have done this all day today, with separate projects and keep getting the same results. I have inserted the scan data in both metric and feet units, measured identical objects and have come up with the same dimensions between the both units. But I still cannot get them to land where they need to.
I am unsure if this is a coordinate system error but most of the stuff that we scan is in an arbitrary system, so I am not sure if assigning a coordinate system will do the trick.
View 2 Replies
View Related
Apr 17, 2013
A consultant working in PowerCADD 2000 sent me a DXF converted file. I have tried opening it in all CAD versions with no success.
I attempted converting it in word to txt file and then back to DXF but still no luck.
View 4 Replies
View Related
Sep 18, 2013
we have some styles to import into our drawings and when we try to import them, we get
INTERNAL ERROR: !dbobji.cpp@8749: eNotOpenForWrite
We don't have a functional work around for this yet. We're using C3D 2014 (IDSP). We can get this error importing styles into some existing CAD files, but not all. We can create a brand new, blank drawing and attempting to import these styles will cause the error. The error occurs during the 'verifying imported styles' progress bar in the lower left.
We thought we were getting somewhere when we exported to dwg 2013 format and opened that and we could then import styles with no issue. Unfortunately, in exporting to dwg 2013 format, we lose all of our surface and point data. Doing a saveas to 2013 apparently does nothing more than just save the drawing and that will still not allow importing of styles.
how to get our style templates to successfully import into all of our CAD files.
View 6 Replies
View Related
Mar 3, 2013
My work PC has been replaced with a fresh copy of Windows and Autodesk 3dsMax 2013 installed. When I try to import files I was importing prior to the installation of the new PC it provides me with the following message:
"The error code reported is eInvalidSymbolTableName"
I have already installed the Product Update 6 however the issue still remains.
Software: Autodesk 3dsMax 2014 - Service Pack 3 (64-Bit)
View 1 Replies
View Related
Jun 14, 2011
I'm trying to import a AVI file (its not DV) into VS but it comes up with the error message "xxx file is inaccessible" followed by the message "This file cannot be added to the project due to unknown file format or not enough memory or copyright".
I tried to play it in Windows Media Player but it came up with an error message about missing the required Codec. I installed the required codec (using MediaInfo advice) and Windows Media player can now play the file but VS still can't import it. The video stream of the AVI file is MPEG-4 (DivX 5). I would have thought that once I installed the correct codec for the Windows Media Player that VS should work with that file format?
View 5 Replies
View Related
Aug 14, 2013
How to open a .tin? I tried to create a surface from a TIN as one way but it is looking for .pnt. as well.
View 8 Replies
View Related
Jul 9, 2013
I am encountering an issue during importing a model from DWG file to 3DsMax. There is an error pops up "Unable to Attach this file....". I have attached the picture of the error (Capture.PNG).
I have also attached the DWG file for reference. I don't see anything wrong in the dwg file.
View 1 Replies
View Related
Jan 18, 2013
I am using autodesk autocad civil 3D (Metric).When I am importing point from text file it comes with different scale which is not to 1:1.Actual scale is 1: 3.280 which is exactly equal to 1m :1 ft ratio.
So, my guess is, X,Y,Z coordinates are importing to autocad civil 3D is in feets and measured distance points in meters.
View 3 Replies
View Related
Aug 27, 2012
I am having trouble importing a field book file.......I click the option to import survey data, verify the survey database then select the field book option but at that point Civil 3D does not alow me to browse to select a field book file.
View 1 Replies
View Related
Oct 23, 2013
I have been running PSE 10 for a while with my Canon 60D, windows 7 and I have never had an issue with importing CR2 files to my organizer. Now all of the sudden they will no longer show up in the organizer or rather there is the icon with a question mark, and the "mssing file" error. When I use the downloader from my card reader I can see them in the preview screen, but when the downloader is done and the files are in the organizer, get nothing but the aforementioned icons.
I installed to the DNG converter as suggested, but that did nothing as well. So, I finally gave up, purchased PSE 12, installed it and guess what, still no luck. I have updated the RAW converter to the latest version and as near as I can tell I have done everything suggested. Like I said earlier, I can see the pictures clearly in the adobe downloader when I import the files from my memory card and I can open the pics fine in the Canon software, I can even open the picture in the Editor if I go through the editor; but I can't do anything with the picture in the Organizer.
View 17 Replies
View Related
Jul 12, 2010
I can't remember how to import a ctb file into my plot settings for a drawing?
View 9 Replies
View Related
Dec 9, 2013
Each time I attempt to import a USGS .adf file the program becomes unresponsive and locks up
approx 450,000KB in size
View 4 Replies
View Related
Apr 7, 2013
I am having trouble processing point code to correctly string the survey points. I have tried three methods of coding and each method has a draw back which isn't really acceptable to me, as it either means more work in the field or more work in the office.
Method 1: I code my points TOP 1 B, or TOE 2 or NS.
When doing this method the survey points don't string correctly. Because of the space delimitation inbetween TOP & 1 Civil3d only recognises the code TOB and doesn't pay attention to the string number. So all the points with the same code get stringed regardless of the string number. Please see file "TOP_1_B_CODE_STYLE.png" and you will see that TOP 1 E strings to point TOP 2 B.This will create a lot of work in the office breaking all the survey figures so they appear correct.
Method 2:I code my points TOP1 B, or TOE2 or NS. When doing this the points don't get coded correctly. Because the code is TOB when I import a point with the code TOB1 it doesn't recognise the code, and puts the point on the default layer 0. Please see file "TOP1_B_STYLE.png" and you will see all of the TOP1 and TOE1 are white and one layer 0. This will make a lot of office work changing points to the correct layers.
Method 3: I code my points without a string number, and only pickup one line at a time. So I would start picking up a toe of bank by TOE B then finish it on TOE E. See file "TOP_B_TOP_E.png" to see the result.
This does get the result I want but it really makes field work procedures slow. It would be very frustrating doing a detail survey of a road and having to walk each individual breakline.
I want to be able to use Method 1 but to have all points get stringed correctly. I have read a pretty good post about this here where the outcome is that all points should be put on layer 0 by default (I can't find it again though!). For me though that isn't a very good option as I often have both design and asbuilt in the same drawing, and need to be able to turn off groups and not have the associated points left on my screen.
View 3 Replies
View Related
Jul 7, 2013
I have a Civil3D file with Drawing Settings = WGS84 UTM-Zone44 North Map3D coordinate system = WGS84 UTM-Zone44 North a USGS DEM from HYDROsheds data set (tile = N40E80) also note this DEM is a folder of multiple ADF files when using FDO provider the DEM comes in just fine but it lands in the wrong location thousands of kilometers away.
When I load the same shape files into ArcMAP10 with spatial reference as WGS84 UTM-Zone44 North everything lines up perfectly.
The header prj.adf file is this:
PROJECTION GEOGRAPHIC
UNITS DD
DATUM WGS84
PARAMETERS
so how do I make it come into Map3D correctly?
View 3 Replies
View Related
Feb 28, 2013
I am tryiny to import coordinate file like I have so many times and the Select File box keeps telling me "No point file format match found". I click the proper file format and it shows in the Preview box but the OK box will not go dark so I can clcik on it. The file is a CSv and tried making it a txt with no luck. Using 2012.
View 6 Replies
View Related
Apr 16, 2012
when in part building i edit a part and want to save it as a different name i get a error saving xml file and it does not save the new part.
View 3 Replies
View Related
Jul 18, 2013
When I try to save a drawing, the box to choose the location, how I want to save doesn't show.
View 3 Replies
View Related
Nov 7, 2013
I have a HEC RAS model which I ran a steady flow simulation on, and then I tried to use the GIS Export button to get a .sdf file. When I tried to connect to the .sdf file in Civil 3D, I got these errors:
Failed to connect.
Failed to open FDO connection.
File is not an SDF file, or is an SDF file with an unsupported version.
An error occurred during SDF database access.
I played around with the settings I chose when I exported in HEC RAS and couldn't get any different results.
View 9 Replies
View Related
Aug 21, 2013
I have downloaded ArcGrid (ADF) files from the USGS and am trying to define a TIN surface in Civil 3D with those files. I have done this in the past without difficulty but now I get a fatal error and the system crashes in the middle of the process. The ADF files are large, approximately 465 meg, and cover an entire USGS quad area. Is there any tricks or sollutions that would allow me to use this data source to create surfaces without my system crashing?
The system I am using is a Dell Intel Xeon CPU, W365@3.20GHz with 24 GB RAM, 64 Bit OS.
View 3 Replies
View Related
May 11, 2012
I am trying to make parts in part builder but when I try saving I get the error message "error saving XML file". I tried changing the setting on the files for saving but that doesn't seem to work.
View 5 Replies
View Related
Feb 8, 2011
I'm having a problem opening AutoCad Civil 3D 2010.
When I click the shortcut Windows starts configuration and then I get the following error message:
Error 1308.Source file not found;C:autodeskAutoCAD Civil 3D 2010
x86C3DProgram Files
ootCommon Files FolderAutodesk
sharedAdLM|R1en-UShelpBRWstylecommons.css.old.
Verify that the files exists and that you can access it. Needless to say AutoCad wont open all I get is Retry or Cancel, selecting.
Retry just gets the same error so when I Cancel I then get "Are you sure you want to Cancel" which I select and then I get the message Fatal Error during installation.
This is a downloaded install from Autodesk and I dont have discs available.
DWG TruView,Autodesk Vault 2010 and Autodesk Design all installed OK.
System detail's; OS is 64 bit Windows Home 7 Ver 6.1.7600 with IE8
CPU AMD Athlon 11 P320 Dual Core, 4 gig RAM,500GB HDD running on a new Toshiba Laptop.
I've looked around at various forum's without success.A couple of sites offer what they call a fix but it turns out to be registry scanners.
View 9 Replies
View Related
Aug 28, 2012
We are using AutoCAD Civil 3D Land Desktop Companion 2009 on all machines and one of our machines is getting the message "Error opening Point Database" and then gives the project file pathcogopoints.mdb.
It also gives the message "The Microsoft Jet database engine cannot open the file. It is already opened exclusively by another user, or you need permission to view its data." It is not opened by another user and permissions have been given for all machines to access these files.
Background information: We move older projects to an external hard drive for archiving and occasionally need to access them as the need arises. We have done this successfully for some time without issue, but now one of our machines is giving the above error. The other machine, which the external hard drive is connected, does not have this problem. We tried moving one project file back to the original location and it seemed to work okay, but another file did not. Some files were created using an older vrsion of AutoCAD, but that has not been a problem with opening them in the past. All sharing permissions to the external hard drive have been checked and seem to be working properly.
View 2 Replies
View Related
Dec 30, 2013
I'm trying to do a save as of a previously created and validated part. When I create a new chapter and try to save the part in the new chapter, I get an error message saying "ERROR SAVING COLE FILE". What is a COLE file and why am I getting this error? Could there be a problem because the original part was created in 2013, and now I'm working in 2014?
We recently changed the location of our CAD Standards (such as Pipe Network Catalog). Can I simply copy the Pipe Network Catalog and paste it to the new location and have everything work the same or do I have to do something special?
View 2 Replies
View Related
Jul 19, 2012
I am using Civil 3D 2011, and the last 2 days I have been running into this issue. I tried google, and the most recent item google brought up was from May 2011, so I am coming here.
I am trying to import a tab from another drawing, and it does not matter which tab or what drawing, I am getting this issue.
View 9 Replies
View Related
Mar 20, 2013
Having a problem with data shorcutiing in a surface created from an ascii file.
I am creating the surface as a grid surface. Itcreates the data shortcut. However when data shortcutting into a new file. Boom! (see above)
Using Civil 3D 2013 - SP1
Civil 3D 2014 (SP1)
Win 7 Pro x64
DELL Precision Workstation T3500
Intel Xeon 3.3GHz (w3680)
24Gb Ram
NVIDIA Quadro 2000 (1GB)
View 2 Replies
View Related
Jun 18, 2012
I have tried to import a DGN file into AutoCAD 2013 both plain jane and the verticals. I am trouble shooting at the moment gathering more information but so far this is happening to me and another computer in a different office as well.
View 7 Replies
View Related
Aug 17, 2013
I am working on the part builder tutorials for AutoCAD Civil 3D 2014. Every time I click "Save Part Family", I get the error message "Error Saving XML File".
View 4 Replies
View Related
Jun 7, 2012
I am having problem convertin this SLDPRT file to inventor.
I am currently using 2012. I tried importing the file but nothing shows up when I import it. All I get is this translation report with error.
translate this SLDPRT file to .ipt file?
View 9 Replies
View Related
