A consultant working in PowerCADD 2000 sent me a DXF converted file. I have tried opening it in all CAD versions with no success.
I attempted converting it in word to txt file and then back to DXF but still no luck.
I have tried to import a DGN file into AutoCAD 2013 both plain jane and the verticals. I am trouble shooting at the moment gathering more information but so far this is happening to me and another computer in a different office as well.
View 7 Replies View RelatedI get the following error when I try to import a comma delineated CSV file into Geotechnics 2013. When I first ran Geo technics I received 15 errors. I made changes to the csv file and now I get 15 errors in a different location.
I've included the 2 CSV files.
Example of the error message.
Error 0 The CSV appears to be corrupt near record '332' field '3 at position '1044'. Current raw data : '
1020 SB,29,34,GRAVELLY SAND medium grained gray waterbearing medium dense
1020 SB,34,36.5,GRAVEL WITH SAND gray waterbearing medium dense
1020 SB,36.5,41.5,GRAVELLY SAND medium grained gray to brownish gray waterbearing loose to medium dense
1020 SB,41.5,52.5,SAND WITH GRAVEL medium grained gray waterbearing medium dense
1020 SB,52.5,58,SAND a little gravel fine to medium grained brownish gray waterbearing medium dense
1020 SB,58,63,SAND WITH GRAVEL medium to fine grained gray waterbearing dense a lens of fine grained sand with silt
[code]...........
I am trying to import a CSV file in AutoCAD 2014 but cannot find proper function. Is there any automatic function that will do it for me or I have to create some kind of tool to accomplish that task?
View 6 Replies View RelatedMy work PC has been replaced with a fresh copy of Windows and Autodesk 3dsMax 2013 installed. When I try to import files I was importing prior to the installation of the new PC it provides me with the following message:
"The error code reported is eInvalidSymbolTableName"
I have already installed the Product Update 6 however the issue still remains.
Software: Autodesk 3dsMax 2014 - Service Pack 3 (64-Bit)
I am battling is bringing in LiDAR files from ArcGIS. I have tried TXT and ASC, and they both seem to only maintain the elevation to the nearest foot, as you can see in the attached image.
What is strange, is that when the file is brought back into GIS, this issue is a problem. Is there a setting for reducing the amount of units when importing data? The text file as I shared has data to the thousandth.
When I try to attach a 2013 Excel file into a 2014 drawing I get a message 'You have selected an unsupported DGN File. Only V7 and V8 files are supported.' Cannot attache through the Import command either. I know in past versions you could insert the file and any changes made to the file appeared to the attachment in the drawing.
Is this no longer possible? Surely not, it is way to handy. What am I overlooking to make this happen?
I am importing solidworks assembly files into AutoCAD 2014. They show up fine after importing them. It says the assembly is in inches but when i go into the individual parts blocks they are all 25.4 scale. Is there a way to not have all the parts scaled up when it is imported?
View 4 Replies View RelatedI'm trying to import a AVI file (its not DV) into VS but it comes up with the error message "xxx file is inaccessible" followed by the message "This file cannot be added to the project due to unknown file format or not enough memory or copyright".
I tried to play it in Windows Media Player but it came up with an error message about missing the required Codec. I installed the required codec (using MediaInfo advice) and Windows Media player can now play the file but VS still can't import it. The video stream of the AVI file is MPEG-4 (DivX 5). I would have thought that once I installed the correct codec for the Windows Media Player that VS should work with that file format?
when trying to reopen a file from the "recently used" file list? When I try to click on a file from the list it gives me a message stating "error opening file". I know this will happen if the file has been moved to another location, but the files are in the same place as when I originally opened them. None of the files in the list will open anymore. Is this a pathing issue?
View 9 Replies View RelatedI am encountering an issue during importing a model from DWG file to 3DsMax. There is an error pops up "Unable to Attach this file....". I have attached the picture of the error (Capture.PNG).
I have also attached the DWG file for reference. I don't see anything wrong in the dwg file.
I have been running PSE 10 for a while with my Canon 60D, windows 7 and I have never had an issue with importing CR2 files to my organizer. Now all of the sudden they will no longer show up in the organizer or rather there is the icon with a question mark, and the "mssing file" error. When I use the downloader from my card reader I can see them in the preview screen, but when the downloader is done and the files are in the organizer, get nothing but the aforementioned icons.
I installed to the DNG converter as suggested, but that did nothing as well. So, I finally gave up, purchased PSE 12, installed it and guess what, still no luck. I have updated the RAW converter to the latest version and as near as I can tell I have done everything suggested. Like I said earlier, I can see the pictures clearly in the adobe downloader when I import the files from my memory card and I can open the pics fine in the Canon software, I can even open the picture in the Editor if I go through the editor; but I can't do anything with the picture in the Organizer.
When I open a file in Inventor 2013 I get the error message "cannot open XML file" for 20 or more files.(See attachment) This has only been an issue since 2013 was installed. What do I need to do to correct this?
View 2 Replies View RelatedAutoCAD 2014 creating "fatal error unhandled access violation reading 0x0010 exception at 65e3f417h" while attempting to reload a MicroStation file that worked previously in dwg.
View 9 Replies View RelatedWhen AutoCAD is closed and I try to open a drawing from the Windows Explorer I get a fatal error and when AutoCAD is opened before opening the file from Windows Explorer everything works fine. We have this problem with several stations at our office.
View 4 Replies View RelatedWe are facing strange issue with all different versions of AutoCAD (2007, 2011, 2013). While users are working on the file, all of a sudden the contents (work done) are lost and it becomes all blank. The file size is same but when we open the file all the work done is not displayed, but just a blank screen.
It happens occasionally and there is some Automation Error in the command line below. The software is not hanging but the open file is in hang state and we have to close it. While closing whether we select yes/no the content (work done) is all lost. The temp location where the files are saved in one of the computer is become huge around 40GB will many Autocad autosave and temporary files; if it has anything to do with it !
I recently installed Autocad 2014 with Carlson Survey 2014. When I use Etransmit or file conversion i get a Fatal Error. when i uninstall the civil 3d object enabler, the problem goes away, but i need the object enabler and i need to convert files. Is this not a major issue that Autodesk would consider important enough to address, or is the object enabler minor in comparison to other issues?
View 4 Replies View RelatedI am trying to import PTX or LAS files into Civil 3D and keep getting coordinate errors. Meaning, the scan data comes in at the right size (I've verified dimensions in RealityLINx) but for some reason the scans keep coming in close to the 0,0,0 point. I have tried two seperate projects, one with arbituary coords (7000, 7000, 600) and another with state plane coords (NAD27, Zone 5).
I have tried two ways... Through the Prospector using the CREATEPOINTCLOUD command. The scan data is in metric units and I have not found a way to convert the scan data, in Civil 3D, to feet units.
The other way I have tried is through the POINTCLOUDINDEX command. This command will convert my PTX or LAS files into a PCG and upon insertion into the drawing, I am able to give it a scale factor to try and convert to feet.
Like I said, I have done this all day today, with separate projects and keep getting the same results. I have inserted the scan data in both metric and feet units, measured identical objects and have come up with the same dimensions between the both units. But I still cannot get them to land where they need to.
I am unsure if this is a coordinate system error but most of the stuff that we scan is in an arbitrary system, so I am not sure if assigning a coordinate system will do the trick.
we have some styles to import into our drawings and when we try to import them, we get
INTERNAL ERROR: !dbobji.cpp@8749: eNotOpenForWrite
We don't have a functional work around for this yet. We're using C3D 2014 (IDSP). We can get this error importing styles into some existing CAD files, but not all. We can create a brand new, blank drawing and attempting to import these styles will cause the error. The error occurs during the 'verifying imported styles' progress bar in the lower left.
We thought we were getting somewhere when we exported to dwg 2013 format and opened that and we could then import styles with no issue. Unfortunately, in exporting to dwg 2013 format, we lose all of our surface and point data. Doing a saveas to 2013 apparently does nothing more than just save the drawing and that will still not allow importing of styles.
how to get our style templates to successfully import into all of our CAD files.
I have an assembly that was created on 64 bit version of Inventor 2013, the total file size of everything is around 150MB. Even if I use 'Pack and Go' to move the file to another computer running the 32 bit version I get an error when I try to open it which says something like:
'unable to allocate 3GB memory for FBAttributeSegment'
The actually figure is over 3GB but of course on a 32 bit version of windows it is physically impossible to allocate that amount of memory (even with the /3GB in boot.ini hack)
I've performed various dynamic simulations as well as animations within the assembly so I'm thinking that perhaps its trying to allocate that huge amount of memory for a saved state of one of those.
What FBAtributeSegment might be and whether there is any special way to save an assembly to avoid this problem? The name FBAttributeSegment doesn't correspond to any part or assembly names.
I should also add that I have no problem opening it in a 32 bit version of Fusion which again suggests to me that it is something like simulation or animation that is causing this
why when i want to import file sketchup by type "IMPORTSKP" in commadline box, i can't import file sketchup into autocad because AutoCad Error Aborting and fatal error, and after that my autocad suddenly closed by it self, so i can't use my auto cad.
View 3 Replies View RelatedIn ACAD 2013, everytime I try to sync my settings to "the cloud", the pull down menu reads "Customization Syn - Error". I am signed in OK to Autodesk 360. Stand alone 64 bit installation on a single machine.
View 2 Replies View RelatedI could not print, save, make any changes to one particular drawing which was created ion Autocad 2013. Whenever I tried to work on the file attached error message pops up and Autocad program gets closed.
View 7 Replies View Relatedi get the following error msg "an autodesk product failed to send the required value for UPITOKEN. the error report sent to autodesk may be incomplete." and then another one also come "FATAL ERROR: unhandled e06d7363h exception at 75b19617h". then finally close.
View 3 Replies View RelatedWhen I search in content explorer it work just fine but when I click on a drawing to open it acts like its opening but right at the end it says Error Decrypting Data and wont open I've tried to look for a solution and I cant find anything.
View 6 Replies View RelatedI am having problem convertin this SLDPRT file to inventor.
I am currently using 2012. I tried importing the file but nothing shows up when I import it. All I get is this translation report with error.
translate this SLDPRT file to .ipt file?
Using AutoCAD 2013 and a basemap that was created in an earlier version of AutoCAD (likely 2002), the coordinates of points exported from surveying equipment are changed when imported into the basemap. Why would the coordiantes be changing when placed on a basemap?
View 1 Replies View RelatedI a GPS device that plugs into my laptop and I need to get the coordinates into my draw in cad?
View 3 Replies View RelatedIs there command, or lisp to import saved UCSs in 2013?
View 3 Replies View RelatedWhen importing objects into Inventor, all surface objects are being joined together into 1 composite surface. What I need is multiple surfaces, or seperate surface/composite objects.
Capture 1
Shows 3 solids imported from Rhino
Each solid is a sepreate solid
Capture 2
Shows 2 solids and 1 surface composite imported from Rhino
Capture 3
Shows 1 solid and 1 surface composite imported from Rhino
1. Why is Inventor creating 1 composite from multiple non intersecting surfaces?
2. How can I avoid this from happening?
Now that we have switched most of our users over to 2013, we are receiving this error - only randomly, not on most drawings - but until it is resolved, we cannot batch plot, publish, because it dumps the plot. Here's a clip of the error we're receiving. When I run a Recover, it doesn't resolve the issue.
View 6 Replies View Related