I am using Civil 3D 2011, and the last 2 days I have been running into this issue. I tried google, and the most recent item google brought up was from May 2011, so I am coming here.
I am trying to import a tab from another drawing, and it does not matter which tab or what drawing, I am getting this issue.
The AutoCAD LT 2012 crashes when I try to copy certain features to different locations. The size of the drawing file is about 3.2 MB. The error message reads as below
FATA ERROR: Cannot write to undo file (probably disk full).
Error: Unhandled Exception
There were some messages posted earlier in regard to this error. Most suggested cleaning temp directory, having more RAM, more graphics memory, etc. I have done everything but I could not overcome this problem. My system specifications are
16GB RAM, Windows 7 (64-bit), More than 100GB free disk space, NVIDIA GEforce GT-120 (512 MB).
What the heck? Brand new machine and new autocad 2012 MEP install.
View 9 Replies View RelatedI have a brand new workstation and only on certain files it will say FATAL ERROR: Cannot write to undo file (probably disk full) when ever I save. I have tried cleaning out the TEMP file, turning off the Undo function, auditing the file and its xrefs, and recovering the file. It was a file that was on the server, but I have pulled it to my local machine and I have also increased the amount of virtural memory avaiable.
View 3 Replies View RelatedEverytime I try to save a file in PS it tells me I can't because the disk is full.I have to save it to the desktop and then cut/paste it into the folder I want.So annoying and time consuming! been doing this for months. How can I correct this?
View 12 Replies View RelatedI have downloaded ArcGrid (ADF) files from the USGS and am trying to define a TIN surface in Civil 3D with those files. I have done this in the past without difficulty but now I get a fatal error and the system crashes in the middle of the process. The ADF files are large, approximately 465 meg, and cover an entire USGS quad area. Is there any tricks or sollutions that would allow me to use this data source to create surfaces without my system crashing?
The system I am using is a Dell Intel Xeon CPU, W365@3.20GHz with 24 GB RAM, 64 Bit OS.
Having a problem with data shorcutiing in a surface created from an ascii file.
I am creating the surface as a grid surface. Itcreates the data shortcut. However when data shortcutting into a new file. Boom! (see above)
Using Civil 3D 2013 - SP1
Civil 3D 2014 (SP1)
Win 7 Pro x64
DELL Precision Workstation T3500
Intel Xeon 3.3GHz (w3680)
24Gb Ram
NVIDIA Quadro 2000 (1GB)
We're getting an error message while trying to save to central- "Disk full while accessing filename_central.rvt"..I figure it's a space error, but the project is on a server which should have plenty of room.
View 1 Replies View RelatedI am building a new computer and have heard that, no matter how much RAM you have, Photoshop always writes the scratch file to a disk. Thus, considering a second small SSD drive to use for scratch and Windows page. Other people have said that if have enough RAM, Photoshop never uses disk. Which is true?
View 1 Replies View RelatedWith prior versions of VideoStudeo I could create a movie and write it to a folder instead of a desk. I used this to preview movies before burning them. How to do this in X3. Neither DVD Factory nor Burn have this option.
View 6 Replies View RelatedI'm using Elements 6 on a 10 year old iMac. Great results until recently receiving message stating "Scratch disk (or startup disk) is full. Remove files to make more room. I get that and manual and iMac
View 10 Replies View RelatedI am currently using ACAD Civil 3D 2014. When I am in paper space and try to plot I get a Fatal Error before I even get to the plot menu. This is only happening in 2 specific drawings and I've done a purge, audit and drawing recovery. With 8GB of Ram there should be more then enough to at least plot a 5MB drawing.
View 4 Replies View RelatedSometimes 3D orbit works perfect, and sometimes it causes a fatal error before you even get started with it. I originally thought it was just large 3D objects causing it, but now I think it's just a 2014 issue...because I've had simple 3d surfaces (3d polyline with a surface) that have caused it to crash, yet have other larger surfaces that orbit without issue. I'm mostly using it to compare 3D polylines to surfaces, usually on as built alignments that we're working on.
View 9 Replies View RelatedI'm working in Civil 3D 2013 and am attempting to bring in notes and blocks from a .dwt, using DesignCenter. As soon as I drag a block into my current drawing I receive a fatal error message and Civil 3D closes. I do get the option to save a recover file.
View 8 Replies View RelatedI am getting a error when I open a specific drawing
FATAL ERROR: unhandled e06d7363h Exception at fel14940.
I have tried to recover the drawing (message says error were found and then I get the same error)
tried the back up file ...no go
tried a back up file from 2 weeks prior, same result.
Have tried inserting as a block to a new drawing... same error.
We are having trouble with one of our C3D 2013 seats crashing (giving a fatal error) when trying to edit or do anything with a pipe network. The drawings work fine on other computers. I am trying to keep from having to remove and reinstall the software.
View 5 Replies View RelatedWhen you start move after hover on a grip point which created by GripDataCollection.Add(myGripData) in GetGripPoints(Entity entity, GripDataCollection grips, ...) appears Fatal Error: Unhandled e0434353h Exception at fdbebccdh.
I try Overrule GripPoints for Alignment. For FeatureLine it works.
Possible, the reason is that Alignment is AlignmentEntityCollection and different approach is required.
public class GripVectorOverrule : GripOverrule {
// A static pointer to our overrule instance
static public GripVectorOverrule theOverrule = new GripVectorOverrule();
public override void GetGripPoints(Entity entity,
GripDataCollection grips,
[Code] .....
I am having an impossible time smoothing a surface created from feature lines in the attached file. I can smooth the service in parts except for the area that I’ve hatched – as soon as I try to smooth that area the drawing freezes or I get a fatal error. Ideally I’d like this surface to smooth to a 3x3 grid.
The things I’ve tried:
- Exploding the feature lines to 3d polys and recreating them as feature lines before adding them back to the surface.
- Copying the feature lines to a new drawing and creating a new surface
- Completely deleting the feature lines and manually re-drawing them from scratch before adding them to a new surface.
- Adding the feature lines with different supplemental distance and mid-ordinate distances (typically I do 2’ and 0.01’ respectively)
- Smoothing the surface in sections instead of one global smoothing of the entire surface (it always fails when I get to the hatched area)
- Smoothing the surface with different grid dimensions.
- Emailing the drawing to coworkers to see if they can create the surface and smooth it on their computers
- Combinations of all of the above.
64-bit HP Desktop - HP Z420
Intel Xeon CPU E5-1620 0 @ 3.60 GHz
24GB RAM
AMD Radeon HD 6570
Windows 7 SP1
I just changed my startup setting from 0 to 2 because I do not ever need a blank "Drawing 1" to work off of. Now I am wondering if that screwed something up because when I boot up AutoCAD and immediately try to open a Sheet Set, I receive the attached messages and then AutoCAD crashes. Is this a bug that needs to be fixed?
View 4 Replies View RelatedI get a fatal error message: Unhandled Access Violation Reading 0x7ffffffd Exception at 6d9cc265h when i try to do anything in a drawing.
View 4 Replies View RelatedI have a Win7 X64 PC running C3D 2103. I recelty installed this for the first time and am seeing the following error message when I launch the application.
I've tried to do a repair and still get the message.
AutoCAD 2014 creating "fatal error unhandled access violation reading 0x0010 exception at 65e3f417h" while attempting to reload a MicroStation file that worked previously in dwg.
View 9 Replies View RelatedWhen AutoCAD is closed and I try to open a drawing from the Windows Explorer I get a fatal error and when AutoCAD is opened before opening the file from Windows Explorer everything works fine. We have this problem with several stations at our office.
View 4 Replies View RelatedReceived this error upon opening a drawing in Civil 3D 2013? I was working on it yesterday, tried to open it today, and it wont open. Recover wont work, and I also went through all the xref's and data reference files and did a purge, -purge, and audit. Only one of about 8 files had 7 errors. I am very good with doing purge and audits throughout the day so my files are usually pretty darn clean.
In addition, the .bak file is also corrupt, and the stupid auto save didnt work. I have it set to auto save every 10 mins, but for some reason it never wants to work. I had the drawing open for over an hour without a single auto save.
When I try to create a survey database I get FATAL ERROR: Unhandled e0434352h Exception at fe139e5dh.
I have repairing both AutoCAD and .Net 4, I also did a regedit on the CommunicationCenter.
AutoCAD Civil 3D 2012 SP4
Windows 7 (64)
Every time i switch to Paper Space I get a Fatal Error in Civil 3D 2013. What could be casing the crash? It does it in every drawing so it does not appear to be specific to any one perticular drawing.
Civil 3D 2013
When I try to paste in any collection of cells from excel using "paste special" C3D crashes. I'm using 2010. It crashes trying to paste into any drawing, and any group of cells.
My error is:
Unhandled Access Violation Reading 0x209519f8 exception at 478f56h
Windows 7 64bit running Civil 3D 2013 with service pack 2 installed.
The system runs fine while on the network, but once the user takes it off the network and home or basically off the network it comes up with a FATAL ERROR when the program is started up.
Error is:
Could not load file or assembly MapPublishlmp.dll or one of its dependencies. The network path was not found.
I can ignore the error screen and "work" in C3D fine; just as long as i don't hit the <Continue> button or "X" in upper right hand corner. If either is selected the program bombs out and generates error report.
Have tried to create a shortcut with new profile, but it did NOT work either.
Like i mentioned - systems works find on network but once it is not connected to the network some issue is happening with the dll file for the mappublishlmp.dll
What ever the hell that is...Not doing ANY GIS work with system. NEVER published ANY drawings where this would have come into the mix.
We have a computer here that won't open drawings. This is the error he gets: FATAL ERROR: Unhandled e0434352h Exception at fcc8940dh. If anybody else tries to open these drawings they open fine. We have tried to open it with Civil 3d 2013 and 2014 but it happens with both programs. We have tried to recover and run audits but it still has problems.
View 1 Replies View RelatedI have C3D2009 with service packs 1,2 and 3 installed in my computer with Windows XP operating system.
I am having fatal error when I try to export a dwg file to 2007 DXF file. I receive the following message:
" Fatal Error: Unhandled Access violation reading Oxfcf064fd Exception at fcf064fdh"
Attached, please find the dwg file I am trying to convert to 2007 DXf file.
I have a plugin that creates cogo points, and for some users it seems to crash every time, but for others it works just fine (as for myself, I have zero problems with it). The subroutine is simple:
Using civLock As DocumentLock = acadDoc.LockDocument
Using trans As Transaction = db.TransactionManager.StartTransaction()
Try
Dim Location As New Point3d(PointX, PointY, PointZ)
Dim CogoPoints As CogoPointCollection = civilDoc.CogoPoints
[Code] .....
The fatal error occurs when the point is added, prior to the attempt to assign a raw description. What is boggling me is that, like I said, it works flawlessly for me (and others) but not at all for some users.