Everytime I try to save a file in PS it tells me I can't because the disk is full.I have to save it to the desktop and then cut/paste it into the folder I want.So annoying and time consuming! been doing this for months. How can I correct this?
View 12 RepliesThe AutoCAD LT 2012 crashes when I try to copy certain features to different locations. The size of the drawing file is about 3.2 MB. The error message reads as below
FATA ERROR: Cannot write to undo file (probably disk full).
Error: Unhandled Exception
There were some messages posted earlier in regard to this error. Most suggested cleaning temp directory, having more RAM, more graphics memory, etc. I have done everything but I could not overcome this problem. My system specifications are
16GB RAM, Windows 7 (64-bit), More than 100GB free disk space, NVIDIA GEforce GT-120 (512 MB).
What the heck? Brand new machine and new autocad 2012 MEP install.
View 9 Replies View RelatedI am using Civil 3D 2011, and the last 2 days I have been running into this issue. I tried google, and the most recent item google brought up was from May 2011, so I am coming here.
I am trying to import a tab from another drawing, and it does not matter which tab or what drawing, I am getting this issue.
I am trying to save a rgb tif file (file size is 31mb) with a single layer that was applied since opening, the only way I am being allowed to save it is if i flatten the image, which i do not want to do. When I try to save it I get "Could not save "leeo083.TIF" because of disk error.
I am on a Dual 2 GHz G5 with 3 gigs of ram OS 10.3.5 There is 40 gigs of open space on the harddrive. Photoshop CS the file is located on the desktop and I am attempting to save it in the same folder.
I have tried save, save as and get the same error.
I'm using Elements 6 on a 10 year old iMac. Great results until recently receiving message stating "Scratch disk (or startup disk) is full. Remove files to make more room. I get that and manual and iMac
View 10 Replies View RelatedWhen selecting SAVE AS in Photoshop CS5, I received a message saying that the disk is full. This is this first time I have seen this message from CS2 on. I don't understand what disk is being mentioned here. Of course I understand what disk full means, but I don't understand what disk is being discussed or refered to.
View 1 Replies View RelatedWe're getting an error message while trying to save to central- "Disk full while accessing filename_central.rvt"..I figure it's a space error, but the project is on a server which should have plenty of room.
View 1 Replies View RelatedI get this message when trying to save files in Photoshop CS2. This happens about 90% of the time when I try to save or save as. I have to save to the desktop or another folder for it to work.
Message I get: "Could not save "Name.tif" because of a disk error."
I've been using Gimp 2.6 for some months now and beginning to get to grips with it. I load photos into Picasa and then process jpegs with Gimp. Upgraded to 2.8.0 a few days ago and hit a problem.
Using the new 2.8 system to to 'export' out to a jpeg file, when I go back to Picasa and make any change at all, which then needs a 'save' I get a Windows error message: "Unable to save all files due to a disk error. The disk may be full or read only".Files not Gimp 2.8 processed are fine.
2.6 no problem - 2.8 problem. I don't think it will be Gimp bug, but there is an associated change which has 'upset' my computer.
Lately I get this error when trying to save a JPEG or TIFF.
As far as I know, other formats save just fine.
Anyone know whats going on?
Photoshop CS6 at opening...What am I supposed to do with this??
View 1 Replies View RelatedAll my MACINTOSH versions of Photoshop - S5, Elements 10, Elements 11 - display the opening start screen, but ABORT THE LAUNCH of the EDITOR with the error message:
"Could not open scratch file because of disk error."
"Could not initialize Photoshop Elements because the preferences file was invalid (it has been deleted)"
I have cleaned up my external disks so that they all have at least 100GB of free space
How can I correct this so that I can recover the Preferences, re-establish the Scratch Disk, and launch the Photoshop Editor?
Windows 7, had everything working fine. Added SSD and installed system from scratch on SSD. Old drive is now my second drive.
Trying to put the scratch disk on the second (old) drive to reduce wear on the SSD. But every time I do, I get the disk error message and it erases all my settings (so annoying!)
I figure it's a permissions thing since I've had to deal with that already to some degree, but I don't know how to fix it since I don't know where adobe is trying to save the scratch file.
I'm trying to create a digital layout in PSCS version 8.0, and when I go to save the psd file (very early stages of the creation...its not very large yet) I get an error that says "Unable to save (file name) because of a disc error". I've never seen this before and am trying not to panic, but I'm on a deadline! LOL And am running behind as usual!
I am using an older mac, and I'm pretty dang maxed out on Gb...gotta clean up some files, but having a hard time finding a free dup file finder for macs...so I'm procrastinating, basically. Could the fact that I've got very little Gb available left have something to do with this?
I just put PS CS2 on my laptop today (dell latitude d610 with win xp), and as soon as I started running it I ran into a Scratch Disk Full error... not by cropping or anything big... but just using the pen tool on a 500x500 72ppi file.
I've been using CS4 for the past week or so with no problems, but didn't want to fork out the ridiculous price to keep it past the trial, so decided to go with CS2 as I've used it on another computer of mine and the price was good.
Is it possible I could be getting this error because of old PS files that weren't fully removed? I did the uninstall of CS4 before I downloaded CS2 so ??? I also did install CS2 before but wouldn't allow me to activate it because it was already on another comp.
I also heard it could be because of a lack of memory on the drive I use for the scratch disks, but I have almost 10 gigs free on the drive I'm using as my secondary (c:), not sure about the one I have as primary (startup). I'm using that as primary because it was there as a default, though I'm not sure what it is. And I did try them vice versa as well and still got the error.
what "Scratch Disk Full" means...? and what is the Scratch Disk?
View 2 Replies View RelatedWhat does scratch disk full mean???
View 3 Replies View RelatedWhat is a scratch disk? And more importantly, how do I delete its contents because the program is not letting me use it anymore because apparently the 'scratch disk is full.' URL....
View 1 Replies View RelatedI have just got my computer back after having a new hard drive fitted. i now find I cannnot get into Photoshop 7 as i get the 'scrath disk full' message each time i try to open the program. When i click the ok box in the message it closes the program down. How do I change the prefernces if the program will not open?
View 3 Replies View RelatedI just installed PS CS and it gives me the error
Could not initialize Photoshop because the scratch disks are full.
is there anyway i can like start PS in a safe mode to set the scratch disks?
I've a problem to open an old X4-Coreldraw file. The first time I can open it - when I want to save this file CDraw says that the file will be changed to the X6 Version. I say OK and save the file. The 2nd time I'll try to open the X6 file again then the Error occurs! I changed my settings in CDraw to a local dir c: emp, also to a new drive - but nothing happens! All the drives have mor than 400 GB free space! I hope this will be enough.
View 14 Replies View RelatedIn CorelDraw X5, I consistently at times receive an error message stating "File Copy Error. TEMP Drive or Output Drive may be full". My temp drives have all been emptied. How to overcome this error message?
View 1 Replies View RelatedI think X4 is somehow creating temp files that gradually fill up the hard drive. Actually not so gradual: approx 3 GB in only a couple hours of editting.X4 crashed this evening, then wouldn't start again. I noticed the HD was full. I deleted 3 GB worth of microsoft stuff I wouldn't be using. X4 would then start, and I continued on editting, till it crashed again. Now the HD is full again, so I assume there is 3GB worth of stuff created since the last crash.
I have a 60 GB main HD where windows lives, and another 1000GB drive where all my videos live. Are there files created by X4 that can be safely deleted, even before the end of the project?
so i recently restored my computer back to factory settings .. so my computer doesnt even have any new downloaded app .. i download photoshop cs6 now im getting scratch disk errors ..which i dont see possible if my computer doesnt have anything on it (besides what it came with) my hard drive has 276 gb i only used 33 . i made an external hard drive and that has 8 gb ... also its moving very slow .. also its telling me i cant make an new canvas size 1920 x 1020 with an resloution of 300 .. im using windows 7 Toshiba
View 3 Replies View RelatedI was working on Adobe Photoshop CS5 on my 64bit Windows 7 when I got the following message:
Adobe Photoshop CS5 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if the solution is available.
How do a save the file before the program needs to close? Can I just close the Windows pop-up displaying the error, or will that also close the program?
I have not saved the file in a while and I don't want to lose all the work I have done.
I'm getting the following message when saving in Photoshop CS6 Extended:
"Could not save "G:...\_0008_DSCF7826.RAF.tif" because the file is already in use or was left open by another application."
The issue NEVER occurs if Bridge CS6 is not running.
The problem occurs intermittently when saving individual files, and nearly every time I try to run a batch operation on multiple files when Bridge is running.
Since a huge part of my work involves batch processing files, I spent some time trying to narrow down the cause. I did 10 Batch processing test runs on twelve 100MB files. My batch process used the "save and close" option in the Batch dialog. I think the issue involves Bridge because:
The issue DID NOT occur (in 10 test runs Batch processing twelve 100 MB images with the "Save and close" option checked):
If the Batch action was run through the Photoshop menu with Bridge turned off.If the Batch action was run through the Photoshop menu with Bridge running & Bridge's Performance and Handling settings for Thumbnails set to "Do Not Process Files larger Than zero MB."
The issue ALWAYS occurs:
At some point when a Batch Action involving a "Save and Close" command is run through the Bridge Menu. My Batch processing generally involves 12 files. Usually, one or two files process, save and close properly before the error message appears. I've reset the preferences for both Photoshop and Bridge several times with no results. I'm running 64-Bit Windows 7 and 64-bit Photoshop CS6 Extended.
I just upgraded from CS5 to CS6 and for the most part love it. I have run into a very serious problem when it comes to saving. I am on Mac 10.6.8 and have a server that I save all my files too. In CS6 anytime I try to save something to the server's HDD I get the error below,
"Could not save as “avi_horizontal_logo.jpg” because the file name was not valid"
Now, the file name is valid, obviously. I can load the file into cs6 but whenever I try to save over or as a copy I get this error. I still have CS5 installed and have gone back and verified that I can save files to my server via CS5 since coming across the error in CS6. Additionally I have no problems saving to my server via Illustrator or In design
This issue is not occurring on one version on only one workstation either. I have both Design Premium (on 2 computers) and Design Standard (on 1) and all three are replicating this issue but the issue is non-existent in CS5.
Could not save (file name) due to program error mac CS69?
View 3 Replies View RelatedI've loaded and reinstalled photoshop elements 3 times. I can not save any files. all i get is cannot save file do to program error message' this is a brand new product with a program error and they want me to pay them to fix there problem. it ain't right.
View 1 Replies View RelatedWhen I try to save a picture, I get this error: Could not save as “xxx.jpg” because the file is locked or you do not have the necessary access privileges. Use the ‘Get Info’ command in the Finder to unlock the file or change permissions on the file or enclosing folders.
View 4 Replies View Related