I get the following error when I attempt to install Adobe Photoshop CS4.
Installation Error
Installation of the following products has failed:
Adobe Bridge CS4
Adobe Photoshop CS4
To continue installing the remaining options, click continue.
To cancel this installation, click cancel.
I can't figure out why it won't let me install it.
My 32 bit box is running Vista Home Premium with 2 gig of ram and and a dual core processor, at 1.7 GHz each. I also am having trouble with Dreamweaver. I installed it but it gives me an error stating 'Licensing for this product has stopped working'. Error: 147:20. I'm just trying to install the trial...
Ive been trying to install Adobe Photoshop CS4 trial for the past 3 days. The only reason I want to try it is because of its ability to create textures directly on models. But whenever I try to install, I get this error"Adobe Drive CS4Error:Error 1603. Fatal error during installation." Dispite it not saying that Adobe Photoshop CS4 having an error, I still get this screen ....
Even though the trial installation has been removed, runs through the entire process and then reports that there is an existing installation.... What should I do?
I currently have Premiere Pro CS5.5 installed as an upgrade from CS4. I have purchased a new, unopened copy of CS5.5 Master Collection Full Retail Version.  Should I deactivate and uninstall the existing installation of Premiere Pro before installing the Master Collection? I have made a clone of my OS drive just in case something goes wrong with the installation.
I am trying to install an old copy of Photoshop 6 that I have and have installed it successfully on this laptop before I had to rebuild it but now I am getting an error when it gets to 71% "Copying ICC profiles" and the error message reads: ComponentMoveData Error Information ComponentMoveData had the following error: Media Name:DataComponent:ICC_ProfilesFile Group: ICC_Profiles_SharedFile:pcd4050k.icmError Number: -106 Has anyone seen this before? I tried on another xp laptop and got the same error message. The disk looks clean with no scratches etc...
I am trying to install Photoshop but it get stuck and the system is hung near at 80%, I waited for more than an hour, tried many times but the same result. My system is a P4. 3Ghz 2GB DDR2 RAM.
I have purchased & installed Adobe Design Premium CS4 three months ago on a machine in USA office and have not registered it. I had taken a copy of the Adobe Design Premium CS4 DVDs to India. I tried to install the same Adobe Design Premium CS4 on a machine in India office. I am getting the error message as "Wrong serial key".
My PSE 6 ceased to run. I have uninstalled it using the provided uninstaller. I have tried to re-install but keep getting this message:  Microsoft Visual C++ Runtime library runtime error Program E:/Adobe Photoshop Elementssetup.exe
This application has requested the Runtime to terminate it in an unusual way..I have PSE 10 installed and it runs OK BUT I prefer the older v6 which has Twain support for my scanner
During installation of Elements 12under Windows 7, while installing Shared Technologies installation stops with error DF 037, and then reverses the entire process. I found the corresponding errors in the installation log: Unable to delete a number of directories under: c:Program DataAdobeCamera RawLens profiles1.0Tokina I deleted these directories manually, but the problem persists and the deleted directories are back.
I can't open Elements 11 after installation. The welcome screen opens, but choosing either Editor or Organiser has no result. If I try to run Editor directly from the Elements 11 folder in Progam File (x386) I receive the error message "Error 5". I have uninstalled and reinstalled (as administrator), but I continue to receive the same message. I am running Windows 7 (64bit), and other Adobe products run fine (Lightworks, Acrobat).
I did the great mistake of uninstalling photoshop but i want to re-install it.I thought it wasn't going to be a problem but when i clicked setup, it said initializing installer. when it was done it closed and no installer came.  On Adobe supprot advisor it said cpsid_82829s5: "Missing installation file," bootstrapper error has occurred.  I really want to install it again but i cant. and now i have no photoshop..I tried everything from restarting the computer, cleaning it with that adobe creative suite cleaner and my computer meets all the requirements to run the software.  It was working fine before but I uninstalled it :/ and now i have this problem.
I bought Photoshop CS2 some time ago. I got a new mac (OS X 10.8.2) and when I'm trying to install it I introduce the cd, accept and after it copies the files, appears "The installation failed" The installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.
After installing Windows 7 (not an upgrade), the Installation routine stops on The first disk and Then declares a Pop Up Error 1395: An error occured during the installation of assembly component.
The install routine then executes a "roll back" functions and shuts down.What do I do to re-install my software? Of course, I do have the 24 digit installation SW Codes as verified on my Adobe member account
When I tried to install the photosohop CS5, the below errors keep prompting out. Â Exit Code: 7Â -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 70 error(s), 58 warning(s)Â ERROR: DS011: Payload path does not exist and no media record specified. ERROR: DS011: Payload path does not exist and no media record specified. ERROR: DS011: Payload path does not exist and no media record specified. ERROR: DS011: Payload path does not exist and no media record specified.
i'm having troubles to install lightroom 5.2.  I keep getting this error  As you can see by the screen shot i'm on 10.9 ? I was on 10.6.8 but did the upgrade so I could load lightroom 5 ... and now I'm still getting this message?  i'm on a macbook pro to..Â
Last weekend I installed Gimp 2.6.11. The installation went fine. However During the startup process of Gimp I get a message from file wmf.exe that icuuc40.dll is missing. As suggested I removed and installed Gimp again. I still get the message. Gimp works fine.
What is this file and how can get rid of the message?
I have Windows 7. Gimp is installed in Program Files (x86).
I have been using Ulead VideoStudio / Corel VideoStudio since the 4SE version and made all upgrades, up to X4.On April 1, 2012, I purchased then the UG from VS X4 Pro to VS X5 Pro and downloaded the software through the link provided by Corel.
I start the installation, enter the S/N of X5 and X4 (because I purchased an upgrade).But installation always stops with an error message at the following step: "Please wait while we configure Microsoft Visual C+++ 2005 Redistributable"
The error message is: "1: ALLUSERS property is not 1 - this MSM cannot be used for a per-user or fallback-to-per-user install".
What I already tried so far...I already uninstalled VS X4 and used the "VS_Cleanup", but the error persists. Meanwhile, I contacted Corel support, and they recommended to uninstall Microsoft Visual C++ and then to re-install it. I followed their instructions and uninstalled all instances of Microsoft Visual C++ and then re-installed the latest version, i.e. Microsoft Visual C++ 2010 SP1 (x64).However, the same problem persists.
Meanwhile, I tried many other approaches: I moved the installation file (.exe file) to the desktop and tried the installation from there, I tried the installation as another user (equally with administrator rights), I tried to install under Windows Safe Mode (this failed, since some necessary drivers or software was apparently not loaded), removed any remaining traces of VS X4 manually and made a registry clean up, etc.Note also that all latest updates of Windows and related software are made.
I also re-downloaded the installation file, in order to make sure there is no problem with a corrupt installation file.
Video standard: PAL/SECAM, manually selected during the installation process.
when i install corel draw its gives me an error that your setup file has an error it gives crc error and ask me to ignore or abort when i ignore its continue extraction butt when its extract then on installation its give errrors. i install trail version i download from different sites like from corel or downloadcnet.com but its give me same error when extraction
An error occored during the installation of assembly component
{5C21D397-1DA5-3749-8C1F-165D21DE9E3E} Â The installation up to that point is reversed. No product is installed. Â Downloading the file for a second time does no solve the problem.
I downloaded inventor 2012 64bit onto my computer running windows vista. Before I could install it I'd that I needed the windows vista service pack 2. After downloading and installing that it also said that I need the 971138. I also downloaded and installed that. My problem is when I install inventor 2012. It comes up with the following error: Error 1308. Source file not found. C:AutodeskAutodesk_Inventor_2012_English_Win_64bitx64InventorProgram FilesAutodeskInventor 2012Bingranite60md.dll. Verify that the file exists and that you can access it. It gives me the option of either retry or cancel, therefore I cannot complete the installation.
Halfway installing PSP Prox4 from my disc or via the web, error message comes up: "The system can not find the device specified" and "Your system has not been modified".I have the latest drivers and DirectX installed.
I just purchased Corel PaintShop Pro x4 today.At the beginning of installation, a box pops up and says: "The feature you are trying to use is on a netwok resource that is unavailable.
Click OK to try again, or enter an alternate path to a folder containing the installation package "vcredist.msi" in the box below."
Nothing works when I change the destination folder, and when I finally click "cancel" another box pops up saying: "Error 1714. The older version of Microsoft Visual C++ 2005 Reditributable cannot be removed. Contact your technical support group."
