I'm getting this error (see attachment) when I try to open an NX file in Inventor 2011. I've downloaded the file from a data transfer site and I can preview the part in the preview window, but it does not open properly. This is the first time this has happened, as I've converted files before with no problem.
View 5 RepliesI have succesfully installed Autodesk Inventor 2011 (Student License) on my Windows 7 (64-bit) operating system without any errors. I can open Inventor 2011, but when I try to open a new or existing file, Inventor suddenly closes and the 'Autodesk Inventor Error Report'-window opens, giving the following error:
Error: Unhandled Exception
When I go to my project folders and try to open any inventor file, the following message appears:
"Inventor.exe needs to register with he operating system and the following programs (Explorer) are running and may
prevent registration from succesfully completing. Autodesk recommends terminating the offending processes to ensure proper registration. Terminate these processes before continuing with the registration?"
If i cick 'Yes', the problem remains.
I've tried reinstalling, following the instructions carefully (installed as administrator), without success. I installed both service packs. I keep having the same problems, while in the past, it has been working perfectly, but I lost it because of hardware problems, which are now resolved.
Technical Info:
OS: Windows 7 64-bit
Processor: Intel(R) Core(TM) i5 CPU M430 @ 2.27GHz
4,00 GB RAM
ATI Mobility Radeon HD 5650
i am using Window Vista, and i'm using my AutoCad 2011 for almost a year and a half now but this past week i cannot open it any any more for some errors;
Problem signature:
Problem Event Name: AppHangB1
Application Name: acad.exe
Application Version: 24.1.208.0
Application Timestamp: 4dbf99e8
Hang Signature: b33a
Hang Type: 0
OS Version: 6.0.6002.2.2.0.768.2
[code]....
I am having an issue opening a SolidWorks file in Inventor. The file is a native SolidWorks .sldprt file. This is the procedure I followed: File-Open in Inventor, changed file type to SolidWorks Files and selected the file on my computer to be opened. I then recieve an HTML error message stating "Error - Translation failed. This version is not supported." I am currently using Inventor 2013. I received the file from one of our sister companies and we were hoping to be able to exchange native files easily using Inventors built in translator.
Any translator or add-in that would work to open files of this type.
I am using Inventor 2012, service pack 1 is installed as is hotfix DL17804781.
When opening certain Catia files, I get a Runtime Error. After I click ok, Inventor closes without the ability to send a crash report. I never had this issue using Inventor 2011, so I am not sure if it is new to 2012 or if I have something else going on.
Autodesk Product Design Suit 2012 sp1
Win 7, 64bit
HP Z400
Intel Xeon W3520 @ 3.07 GHz
16Gb Ram
Nvidia Quadpro 400 512MB
When I open Inventor, the message "cannot load..." pop-out. Although I still can create the 3D model in Inventor but everytime when I open my existing or new drawing file (.idw), Inventor will occur fatal error and closed.
View 2 Replies View Relatedmy user has AutoCAD Inventor 2010 and she wants to open a file created using AutoCAD 2007 but always failed with the error message that system running on low memory then Autocad will close. The file can be open without problem using AutoCAD 2007. I'd tried using a computer with Xeon Processor and 4 GB RAM but still facing the same problem so I guessed it's not the hardware problem. Is it a bug and how to solve it?
View 6 Replies View RelatedOK then update. I select never show this message agian ever (my favorite ) - but guess what a it pops back up. Nothing is wrong with the assembly
View 1 Replies View RelatedWe have used Inventor 2010 with PSP 2011.
- Recently we have upgrade to Inventor 2012.
- Installed pspro_cad_fp_10.0.39.3 update for PSP Server and for PSP Clients.
And now, some drawings we can not open in Inventor 2012. Inventor crashes!
But some drawings we are lucky to be able to open and work with.
Drawings have the same template.
If the drawing is locked (read only) then inventor 2012 can open it without a crash.
If I drag&drop drawing out from PSP onto my Desktop, Inventor 2012 can open drawing without problems.
So we are not able to work with some drawings in Inventor 2012 and PSP 2011.
As the first and quick (and 100%) solution - rollback to Inventor 2010 can cost us about 5 man-days of work. (Because we have done some work in Inventor 2012 allready and will not be able to work with this in Inventor 2010)
Autodesk Inventor Professional 2011
It freezes when I try to open a STEP file, even one I just created.
I am trying to install the student version of autodesk inventor 2011, and I'm using the default installation settings. The installation aborts when installing C++ and this is the message I get in the install log:
2011/1/9:17:36:18 Bobby Porwal NP-CHU === Setup started on NP-CHU by Bobby Porwal ===
2011/1/9:17:38:56 Bobby Porwal NP-CHU Install Microsoft Visual C++ 2008 SP1 Redistributable (x86) Failed Installation aborted, Result=1603
when trying to reopen a file from the "recently used" file list? When I try to click on a file from the list it gives me a message stating "error opening file". I know this will happen if the file has been moved to another location, but the files are in the same place as when I originally opened them. None of the files in the list will open anymore. Is this a pathing issue?
View 9 Replies View RelatedWe are using Inventor 2011.
Inventor adds extra spaces to the parts list filenames when they wrap.
The space is added just before the break.
We access the parts list in several VBA programs. Mainly to get the line Item number.
With the Filename corrupted with random space characters I cannot tie the document to the item number in code.
Is there a way to get the true fully pathed document name from a parts list Line item instead of the flakey filename that is displayed?
When AutoCAD is closed and I try to open a drawing from the Windows Explorer I get a fatal error and when AutoCAD is opened before opening the file from Windows Explorer everything works fine. We have this problem with several stations at our office.
View 4 Replies View RelatedWhen i attempt to open a dxf file in autocad it comes up with error messages;
Class not registered
I'm attempting to uninstall autoCAD 2009, I keep getting a message reading:
- Error opening installation log file. Verify that the specified log file location exists and that you can write to it.
I have located the install log..... no what.
I cannot seem to open .dwg files from an email using AutoCAD LT 2010
I get an error saying c:users"username" empoutlookj0814-052.dwg is currently in use or is read only.
Would you like to open the file ready-only?
I can save the file then open it. But the user wants to open the attachment straight from the email.
I've tried changing the attributes on the folder from read only but this doesn't work, tried another profile, again this doesn't work.
It does seem to only effect .dwg files when opening with AutoCAD LT 2010. If someone sends an xls, .doc, .pdf attachment they all open OK, I'm sure this is an AutoCAD LT 2010 issue. I have downloaded and installed both hotfixes / patches from the autodesk website and reinstalled the software but this hasn't worked either.
Even though I run the Dwgconvert function in DwgTrueview 2012 I still can not open the converted file in AutoCAD Mechanical 2012 SP 2. Fatal error with some hex memory addresses displayed. DwgTrueview opens and displays the dwg. just fine. AutoCAD R14 & 2000 open the file with no problem as well.
View 3 Replies View RelatedTrying to place this .xls file into my idw. Does not work too well. Part of the worksheet is cropped off and the images are out of place.
Here is what I'm getting.
Is there a way to get this to show on the drawing. I am using the Manage>Insert Object command.
We modeled parts in inches. We save as copy to an .STL file to get SLA prototypes made. The parts came back 2.54 times bigger than needed. Reason is the default setting for saving as .STL files is Centimeters.... Not sure why Autodesk did this....but yes I understand it's not their fault, we should have checked under options and changed it to inches.....we just assumed that you model in inches, it would save as in inches....See what happens when you assume....
View 5 Replies View RelatedThis error message (see attached) pop up, when I open more than 2 or 3 dwg files in autocad.
I am not sure how to correct it. I have a Windows 7 pro x64 system running Inventor 2012
I am working on a very important print project and the deadline is on tuesday. When I opened my *.psd files last night an error appeared at the end of the "Reading Photoshop format" progress:
Quote:
Could not complete your request because of a programm error.
The files can't be opened anymore...
I really need those files working for I don't have the time to re-do them. Can the files be recovered? (WinXP no-SP, Photoshop CS)
in inventor 2009: i linked parameter of 3D design from excel file. If i change the value on excel file --> dimension of 3D design will change. It work fine.
So, in inventor 2011, i can not do it: when change the value on excel file, 3D model does not change dimension.
I've applied the Mac Photoshop CS6 13.0.2 update this morning, but now, I cannot open one of my working .psd document anymore, Photoshop raises a "could not complete your request because of a program error" message everytime. I've tried to open it on another workstation, a Windows one, running Photoshop CS5 12.0.4, and it's okay, meaning that my .psd file is not corrupted.
I've tried to disable Photoshop extensions from the extensions manager, but problem persists.
I have created a psd file with GIMP (version 2.6.11) which I have created myself, opened and saved several times.
Today I try to continue my work on this file and I got error 17718 when trying to open the file. I have never opened this file with another application than GIMP.
- How can I prevent it from happening again?- Most importantly: How can I repair the file, so that my work is not lost?
I have GIMP 2.6 installed under Windows xp. When I try to open an .eps file, I get this error:
Error starting Ghostscript. Make sure that Ghostscript is installed and - if necessary - use the environment variable GS_PROG to tell GIMP about its location.
(Failed to execute child process (No such file or directory))
I then downloaded Ghostscript and went thru its regular Windows installation routine. I get the same error in GIMP trying to open an .eps file. How to set the variable GS_PROG and can't find instructions for this variable in the on-line GIMP manual.
I changed from 2012 to 2013 Inventor,
When I open an existing drawing, I have this error msg.
I get a "Could not complete your request because it is not a valid Photoshop document." error message whenever I try to open up a PSD file created on a Mac using Photoshop CC on my PC using CC. Other people have been able to open the file from the same location, so the files aren't corrupted.
View 2 Replies View RelatedI am new to gimp and after using the program yesterday afternoon I went in to do some more work on the document and got the following error message: "Error loading PSD file: Unsupported Compression Mode: Error #43775. How to get this file opened? I was Opening As Layers.
View 1 Replies View RelatedWhen I attempt to use Illustrator CS6 to open an .eps file exported from Google Sketchup Pro 8 I get the following error message "the file is an unknown format and cannot be opened".
If I try to place/link the file I get this message "can't place the illustration. Could not set a position inside the file." Is there an eps version compatibility issue I should be aware of?
I have unchecked resolve file references, etc, and still basically spends 5 minutes looking for files i told it not to look for. Why doesnt it just open the assembly or drawing, without waiting for ever?
View 3 Replies View Related