I have GIMP 2.6 installed under Windows xp. When I try to open an .eps file, I get this error:
Error starting Ghostscript. Make sure that Ghostscript is installed and - if necessary - use the environment variable GS_PROG to tell GIMP about its location.
(Failed to execute child process (No such file or directory))
I then downloaded Ghostscript and went thru its regular Windows installation routine. I get the same error in GIMP trying to open an .eps file. How to set the variable GS_PROG and can't find instructions for this variable in the on-line GIMP manual.
I've tried every smarty solution to get Gimp to open EPS files with ghostscript installed.
Nothing works. I'm on Windows 7 and have looked at some of the solutions on this forum. No luck. I'm wondering why Gimp has had such a long history with this problem.
I have created a psd file with GIMP (version 2.6.11) which I have created myself, opened and saved several times.
Today I try to continue my work on this file and I got error 17718 when trying to open the file. I have never opened this file with another application than GIMP.
- How can I prevent it from happening again?- Most importantly: How can I repair the file, so that my work is not lost?
I am new to gimp and after using the program yesterday afternoon I went in to do some more work on the document and got the following error message: "Error loading PSD file: Unsupported Compression Mode: Error #43775. How to get this file opened? I was Opening As Layers.
when trying to reopen a file from the "recently used" file list? When I try to click on a file from the list it gives me a message stating "error opening file". I know this will happen if the file has been moved to another location, but the files are in the same place as when I originally opened them. None of the files in the list will open anymore. Is this a pathing issue?
A couple of times I was able to successfully open RAW (Canon CR2) files as layers to stitch together, but now when I try to open a RAW file I get error messages.
I am working on a very important print project and the deadline is on tuesday. When I opened my *.psd files last night an error appeared at the end of the "Reading Photoshop format" progress: Quote:
Could not complete your request because of a programm error.
The files can't be opened anymore...
I really need those files working for I don't have the time to re-do them. Can the files be recovered? (WinXP no-SP, Photoshop CS)
I've applied the Mac Photoshop CS6 13.0.2 update this morning, but now, I cannot open one of my working .psd document anymore, Photoshop raises a "could not complete your request because of a program error" message everytime. I've tried to open it on another workstation, a Windows one, running Photoshop CS5 12.0.4, and it's okay, meaning that my .psd file is not corrupted.
I've tried to disable Photoshop extensions from the extensions manager, but problem persists.
I get a "Could not complete your request because it is not a valid Photoshop document." error message whenever I try to open up a PSD file created on a Mac using Photoshop CC on my PC using CC. Other people have been able to open the file from the same location, so the files aren't corrupted.
When AutoCAD is closed and I try to open a drawing from the Windows Explorer I get a fatal error and when AutoCAD is opened before opening the file from Windows Explorer everything works fine. We have this problem with several stations at our office.
I am having an issue opening a SolidWorks file in Inventor. The file is a native SolidWorks .sldprt file. This is the procedure I followed: File-Open in Inventor, changed file type to SolidWorks Files and selected the file on my computer to be opened. I then recieve an HTML error message stating "Error - Translation failed. This version is not supported." I am currently using Inventor 2013. I received the file from one of our sister companies and we were hoping to be able to exchange native files easily using Inventors built in translator.
Any translator or add-in that would work to open files of this type.
I'm getting this error (see attachment) when I try to open an NX file in Inventor 2011. I've downloaded the file from a data transfer site and I can preview the part in the preview window, but it does not open properly. This is the first time this has happened, as I've converted files before with no problem.
When I attempt to use Illustrator CS6 to open an .eps file exported from Google Sketchup Pro 8 I get the following error message "the file is an unknown format and cannot be opened".
If I try to place/link the file I get this message "can't place the illustration. Could not set a position inside the file." Is there an eps version compatibility issue I should be aware of?
This just started happening really recently and I'm not sure at all what the cause is, soWhen opening or saving files, Photoshop displays this error message and closes itself:
and here is a picture of the error message:[URL]...it pops up when saving and opening certain files, but not others. I can't figure out what causes it to happen for particular ones since they are not all in the same location, or the same file type.I am using Windows 7 64bit and this is Photoshop 7.0
I have three .des files that I cannot open. I can see the drawing in the preview window prior to opening but the files themselves won't open. Sometimes the error message I receive states there is an error reading a bitmap, other times that there is an invalid object in the drawing.
Given the choice of abort, retry or ignore, I click on retry which make another window pop up with the same message and choices. Clicking ignore only makes Designer crash. Is there some command in Designer similar to the audit command in AutoCAD that can save these drawings for me?
I have cdx5 (fully patched) running on a windows 7 pro x64 machine (c++, directx, updates all current) that has an issue when saving a file to a mapped network drive. The file will save error free but when you try to open the file again at a later date it gives a c++ runtime error (this application has requested the runtime to terminate in an unexpected way).
If i save the file locally then move it to the network share it seems fine. It can be opened and edited with out issue.
CDx5 needs to save to the mapped drive as the server runs onsite and offsite backups. There is a large volume of files that are changed/created daily. Saving locally and then copied to the server manually is also not an option as the user cannot be relied upon to ensure the files are copied to the server.
I am using Inventor 2012, service pack 1 is installed as is hotfix DL17804781.
When opening certain Catia files, I get a Runtime Error. After I click ok, Inventor closes without the ability to send a crash report. I never had this issue using Inventor 2011, so I am not sure if it is new to 2012 or if I have something else going on.
When I open Inventor, the message "cannot load..." pop-out. Although I still can create the 3D model in Inventor but everytime when I open my existing or new drawing file (.idw), Inventor will occur fatal error and closed.
my user has AutoCAD Inventor 2010 and she wants to open a file created using AutoCAD 2007 but always failed with the error message that system running on low memory then Autocad will close. The file can be open without problem using AutoCAD 2007. I'd tried using a computer with Xeon Processor and 4 GB RAM but still facing the same problem so I guessed it's not the hardware problem. Is it a bug and how to solve it?
I cannot seem to open .dwg files from an email using AutoCAD LT 2010
I get an error saying c:users"username" empoutlookj0814-052.dwg is currently in use or is read only.
Would you like to open the file ready-only?
I can save the file then open it. But the user wants to open the attachment straight from the email.
I've tried changing the attributes on the folder from read only but this doesn't work, tried another profile, again this doesn't work.
It does seem to only effect .dwg files when opening with AutoCAD LT 2010. If someone sends an xls, .doc, .pdf attachment they all open OK, I'm sure this is an AutoCAD LT 2010 issue. I have downloaded and installed both hotfixes / patches from the autodesk website and reinstalled the software but this hasn't worked either.
Even though I run the Dwgconvert function in DwgTrueview 2012 I still can not open the converted file in AutoCAD Mechanical 2012 SP 2. Fatal error with some hex memory addresses displayed. DwgTrueview opens and displays the dwg. just fine. AutoCAD R14 & 2000 open the file with no problem as well.
When I double-click an AI-file to open it, Illustrator resize/minimize it's own window. Sometime so much that Illustrator itself reply with the error: "Can't open the Illustration. There is not enough room for the window; Increase document area and try again."
If I open a file (browse for it) from within Illustrator it works fine and Illustrator keeps whatever windows-size I have chosen.
Windows 7 Professional (64 bit) Adobe Illustrator CC 17.1.0 (64 bit)
I get error message saying archive section of adobe photoshop elements is missing when I try to run the exe file; Ive downloaded everything. Ill have another birthday by the time I download it all again.
I've been trying to replicate the problem, but it appears to be intermittent. It happens on multiple computers, we're using 2.8.4 on Windows 8 at the moment.
Scenario: GIMP is open with multiple files.
Browse a folder in explorer and select OPEN WITH GIMP or just OPEN. And a GIMP startup splash screen appears and reloads the GIMP application automatically closing and losing any work that was in progress on the prior GIMP screens.
I can't get started - I have downloaded GIMP 2.8 but can't get it running as I get this error message:
"USER Installation Failed.
The GIMP user installation failed; see the log for details. It appears that you are using GIMP for the first time. GIMP will now create a folder named '/Users /andrzejnowosielski/Library/Application Support/GIMP/2.8' and copy some files to it.
Creating folder '/Users/myname/Library/Application Support/GIMP/2.8'..Cannot create folder '/Users/myname/Library/Application Support/GIMP/2.8': Permission denied" myname is my full name not myname......
I am using a Max with OSX version 10.7.5..I have checked all the relevant folders and made them all Read Write..I have tried making the relevant folders manually and re-starting GIMP but same message.