I've tried every smarty solution to get Gimp to open EPS files with ghostscript installed.
Nothing works. I'm on Windows 7 and have looked at some of the solutions on this forum. No luck. I'm wondering why Gimp has had such a long history with this problem.
I have GIMP 2.6 installed under Windows xp. When I try to open an .eps file, I get this error:
Error starting Ghostscript. Make sure that Ghostscript is installed and - if necessary - use the environment variable GS_PROG to tell GIMP about its location.
(Failed to execute child process (No such file or directory))
I then downloaded Ghostscript and went thru its regular Windows installation routine. I get the same error in GIMP trying to open an .eps file. How to set the variable GS_PROG and can't find instructions for this variable in the on-line GIMP manual.
A couple of times I was able to successfully open RAW (Canon CR2) files as layers to stitch together, but now when I try to open a RAW file I get error messages.
View 5 Replies View RelatedI have created a psd file with GIMP (version 2.6.11) which I have created myself, opened and saved several times.
Today I try to continue my work on this file and I got error 17718 when trying to open the file. I have never opened this file with another application than GIMP.
- How can I prevent it from happening again?- Most importantly: How can I repair the file, so that my work is not lost?
{3c0047e5-7fbb-4cc0-e7fa-3-b162e2e0f11} is either not designed to run on Windows ot it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support. - Error when trying to open Photoshop files.
View 3 Replies View RelatedI am new to gimp and after using the program yesterday afternoon I went in to do some more work on the document and got the following error message: "Error loading PSD file: Unsupported Compression Mode: Error #43775. How to get this file opened? I was Opening As Layers.
View 1 Replies View RelatedI have some old Photoshop files, tif, psd, jpg, etc. on a CD. When I try to open them, I get an error-108 and the file disappears from the finder. I have tried to copy to the hard drive, but I get an operation cant be completed, one or more items cant be found error-43.
View 1 Replies View RelatedBeen using Revit 2011 for a couple of years and never had any problems until recently. I attempted to load a component file and got an Unrecoverable Error and Revit shut down. Now, it appears that any attempt to load or open a file from inside Revit results in this same problem. I have read multiple posts and solutions and wiped/reinstalled the program. Nothing has worked. I'm running it on XP.
View 2 Replies View RelatedWhen I try and open an Illustrator file, I get the error message "can't open the illustration".
View 2 Replies View RelatedI installed Mavericks yesterday ... Am having issues with Illustrator. First it wouldn't open and had to runt he Java install, that took care of that. I am able to make new files without problem and open EPS files, but cannot open existing AI files UNLESS going to File > Open. If I double click on an AI file I get the error "The appliation can't be found"
I am not running any 3rd party plug ins.
I download PSCS6 beta, and since then, there are some files that I cannot open at all.Got a message ( in both, PS CS 5.1 and in CS6 ) that say;
"Could not complete you request because a program error"
This error message (see attached) pop up, when I open more than 2 or 3 dwg files in autocad.
I am not sure how to correct it. I have a Windows 7 pro x64 system running Inventor 2012
I recently upgraded to CS6 and cannot open any past files in CS6 from CS5. Everytime I try I Get "Unknown Error has Occurred"
View 2 Replies View RelatedPSCS6 with 12.0.4 update. Mac OSX 10.8.2 16GB 1333 Mhz DDR3 543 GB Available
I've recently become aware that other people are getting an error message when opening many of my my psd files if they are on earlier versions of PS and also on PSE, (including the latest version). The message is:
This document contains unknown data which will be discarded to keep layers editable. To preserve the original appearance instead, choose flatten to load composite data as a flattened image.
Three options follow: Flatten Cancel Keep Layers
When 'keep layers' is selected the file opens as normal. However, people with much earlier version (CS version 8) don't get the option to keep layers, and the layers are flattened when the document is opened.
I still have CS5 on my mac, and I find that if I take my finished file into CS5 and save it there, the customer does not get the message above, and the file behaves as it should. Those on very early version of PS can also open the files without any issues.
I've been using CS6 since it was released and have had to delve through all my files and save them in CS5. Not every file is affected and I've been unable to find a common thread.
I've been getting this fatal error message upon opening files.
It seems to be as I try to load x-ref's.
I have a folder of about 3000 images to edit and they're all in EPS format. Not having Photo Shop on my computer, I turned to GIMP.
I located several sources on the internet, all calling for the installation of Ghost Scripts. After trying and failing, I did some more poking around and found that some users were having trouble with opening EPS files in the current version of GIMP, and solved the issue by installing a previous version.
Before I start flailing around with various versions, I figured it would be best to find a place where experts reside.
I have succesfully installed Autodesk Inventor 2011 (Student License) on my Windows 7 (64-bit) operating system without any errors. I can open Inventor 2011, but when I try to open a new or existing file, Inventor suddenly closes and the 'Autodesk Inventor Error Report'-window opens, giving the following error:
Error: Unhandled Exception
When I go to my project folders and try to open any inventor file, the following message appears:
"Inventor.exe needs to register with he operating system and the following programs (Explorer) are running and may
prevent registration from succesfully completing. Autodesk recommends terminating the offending processes to ensure proper registration. Terminate these processes before continuing with the registration?"
If i cick 'Yes', the problem remains.
I've tried reinstalling, following the instructions carefully (installed as administrator), without success. I installed both service packs. I keep having the same problems, while in the past, it has been working perfectly, but I lost it because of hardware problems, which are now resolved.
Technical Info:
OS: Windows 7 64-bit
Processor: Intel(R) Core(TM) i5 CPU M430 @ 2.27GHz
4,00 GB RAM
ATI Mobility Radeon HD 5650
Some saved files will not reopen in CoreldrawX5 showing an error message 'Encountered an improper argument' and that is it! Very frustrating as all the work seems to be lost and needs to be redone.
View 4 Replies View RelatedGIMP 2.6.10-1 on Debian 6 does not open JPEG files recently written by itself. The program freezes and the only way out is to reboot. Older JPEG files are opened as usual, and the problem files can be opened in Digikam and Fotoxx. A sample problem file is attached.
View 14 Replies View RelatedI have recently switched from GIMP 2.2 to GIMP 2.8. I'm using Linux (Mageia 3)
With 2.2, if I ran the GIMP from the command line, when I did File-> Open the file browser would open in the same directory that I had started the GIMP from.
With 2.8 the file browser opens in "Recently Used" and I have to navigate to the directory I want. Is there any way to make it open in the current directory instead?
I often use photoshop to open binary flat files, either 8 or 16 bit depth. In photoshop if I select open using photoshop raw format, a dialog box pops up asking what the image dimensions are (ie, 512x512), the number of channels (ie 1), the bit depth and the byte order.Is there any way to do this in GIMP, either native or with plugins... I dont think that the UFRaw will work as these files do not come from a camera-- they are images of satellite imagery that are just binary flat files.
View 11 Replies View RelatedI've been using Gimp 2.6 for some months now and beginning to get to grips with it. I load photos into Picasa and then process jpegs with Gimp. Upgraded to 2.8.0 a few days ago and hit a problem.
Using the new 2.8 system to to 'export' out to a jpeg file, when I go back to Picasa and make any change at all, which then needs a 'save' I get a Windows error message: "Unable to save all files due to a disk error. The disk may be full or read only".Files not Gimp 2.8 processed are fine.
2.6 no problem - 2.8 problem. I don't think it will be Gimp bug, but there is an associated change which has 'upset' my computer.
I just installed PS CS3 Extended and tried to open a Google KMZ file and received the following error: "Could not complete your request because the file format module cannot parse the file" I also tried creating a new document and insert a new layer from 3D file and received this error:
"could not complete the new layer from 3d file command because of program error"
My system is an HP Mobile Workstation w/Intel Centrino Dou proc.
have encountered an error message on opening Lightroom 4 using Windows 7 Pro 32 bit.
The message is saying - Error in reading preview cache.
I'm using Gimp 2.8.4 on a MacBook Pro.
I have been working on an image file for several hours now, and as a result, there were MANY files open (probably over 30).
I attempted to save the file, and recieved the following error message:
"Could not read the contents of [folder name] Too many open files"
I then closed each of the open files except the file I was trying to save, but got the same results.
The same error message pops up when I try to open a file as well.
My main user folder on the iMac is set to be shared (read/write, including all enclosed files) with my MacBook Pro. The job is a series of one-page InDesign files (they are newspaper advertisements). The IDD files contain a series of Illustrator files with linked PSD files.The idea is that we can both work on the .idd and .ai files in the same folder at the same time.
It's all working fine EXCEPT that whenever an .ai file is opened on the MacBook, Illustrator doesn't know where the linked PSD files are. We can update the link, but when the .ai file is then opened on the iMac and saved, the same thing happens the next time it is opened on the Macbook.
I don't want to embed the PSD files into the .ai files as sometimes I have to modify them and they can be linked to up to 20 .ai files.
G5 iMac OSX 10.7.5 / Macbook Pro OSX 10.8.2 / networked via FireWire cable / file sharing on, laptop user has Administrator status, all files are read/write, permissions include all enclosed files / CS6
Date/Time: 2013-04-07 14:58:28 +0200
OS Version: 10.7.5 (Build 11G63b)
Architecture: x86_64
Report Version: 9
Command: Illustrator
Path: /Applications/Adobe Illustrator CS6/Adobe Illustrator.app/Contents/MacOS/Adobe Illustrator
Version: 723 (16.0.0)
Parent: launchd [132]
PID: 10493
Event: hang
Duration: 0.83s
Steps: 10 (100ms sampling interval)
Pageins: 19
Pageouts: 0
When I try and open CS6 I keep getting a message with Error 213:19. How can I fix this?
View 1 Replies View RelatedI am getting error 6 while opening Photoshop. What to do next ??
View 1 Replies View RelatedWhen I open my Photoshop CS5, I get a configuration error. It states Error:16. Do I have to uninstall/reinstall my program? I bought it through the adobe website and have misplaced my serial number. Would I be able to retrieve it?
View 1 Replies View RelatedOSx Maveriks + iMac27" late 2011 16Bg DDR
I have some trouble with some files and print/printer. This is the message I get.
This issue happens only with some files link this : LINK
With some others I have no problem at all.
Have restored PS preferences (hold down cmd+alt+shift while starting PS CC) , try to change default printer, try to uinstall ad reinstall PS CC with no success.