Been using Revit 2011 for a couple of years and never had any problems until recently. I attempted to load a component file and got an Unrecoverable Error and Revit shut down. Now, it appears that any attempt to load or open a file from inside Revit results in this same problem. I have read multiple posts and solutions and wiped/reinstalled the program. Nothing has worked. I'm running it on XP.
View 2 RepliesI am trying to print from revit 2013 and every time I try and to print a sheet, view, or anything the program crashes saying "unrecoverable error". I have tried updating the software, reinstalling the software, and the error still continues.
View 3 Replies View RelatedI have been using Revit 2013 for a few weeks now. When Revit opens the splash screen appears and the programme loads fine, I then open the file I want to work on. This is when the error message of an "unrecoverable error" occuring.
This used to happen now and then until today which does not open it all. I have seen solutions on other posts but it still doesn't seem to address the problem.
I am getting an error "Unrecoverable Error" when I try to import a .dxf from Autodesk Inventor. I have tried saving as different versions of .dxf with the same results. I am using Version 16.2.0.998 of Corel Draw X6
View 14 Replies View RelatedI'm running Photoshop Elements 5.0. Everything was working fine til this mornin. I've had the program for about a year now. When I tried to open it this morning I got this error message that popped up.
It says:
Unable to continue because of a hardware or system error. Sorry, but this error is unrecoverable.
I've tried repairing the program. That didn't work. Restarted my computer. That didn't work. Uninstalled the program and tried opening it again. That didn't work. I'm at a loss! I really need to get into my program b/c my work is there. I tried opening some of my files (they are located in my Pictures folder) and they pop up with the same message.
I just went on photo shop cs2 and I got a message saying "Unable to continue because of a hardware or system error.Sorry, but this error is unrecoverable." How do I fix this? I reinstalled photo shop I tried restoring my computer, I tried restarting my computer, what do I do? Adobe Image ready works just fine though.
View 1 Replies View RelatedI keep getting the error message when I try to open this one project. Everyone else is getting the same message when opening it. It doesn't matter if it is a local file or a detached central file the same message comes up and closes Revit.
This is a 2011 Revit Architecture model but also crashes 2012.
{3c0047e5-7fbb-4cc0-e7fa-3-b162e2e0f11} is either not designed to run on Windows ot it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support. - Error when trying to open Photoshop files.
View 3 Replies View RelatedI have some old Photoshop files, tif, psd, jpg, etc. on a CD. When I try to open them, I get an error-108 and the file disappears from the finder. I have tried to copy to the hard drive, but I get an operation cant be completed, one or more items cant be found error-43.
View 1 Replies View RelatedI've tried every smarty solution to get Gimp to open EPS files with ghostscript installed.
Nothing works. I'm on Windows 7 and have looked at some of the solutions on this forum. No luck. I'm wondering why Gimp has had such a long history with this problem.
A couple of times I was able to successfully open RAW (Canon CR2) files as layers to stitch together, but now when I try to open a RAW file I get error messages.
View 5 Replies View RelatedWhen I try and open an Illustrator file, I get the error message "can't open the illustration".
View 2 Replies View RelatedI installed Mavericks yesterday ... Am having issues with Illustrator. First it wouldn't open and had to runt he Java install, that took care of that. I am able to make new files without problem and open EPS files, but cannot open existing AI files UNLESS going to File > Open. If I double click on an AI file I get the error "The appliation can't be found"
I am not running any 3rd party plug ins.
I download PSCS6 beta, and since then, there are some files that I cannot open at all.Got a message ( in both, PS CS 5.1 and in CS6 ) that say;
"Could not complete you request because a program error"
This error message (see attached) pop up, when I open more than 2 or 3 dwg files in autocad.
I am not sure how to correct it. I have a Windows 7 pro x64 system running Inventor 2012
I recently upgraded to CS6 and cannot open any past files in CS6 from CS5. Everytime I try I Get "Unknown Error has Occurred"
View 2 Replies View RelatedPSCS6 with 12.0.4 update. Mac OSX 10.8.2 16GB 1333 Mhz DDR3 543 GB Available
I've recently become aware that other people are getting an error message when opening many of my my psd files if they are on earlier versions of PS and also on PSE, (including the latest version). The message is:
This document contains unknown data which will be discarded to keep layers editable. To preserve the original appearance instead, choose flatten to load composite data as a flattened image.
Three options follow: Flatten Cancel Keep Layers
When 'keep layers' is selected the file opens as normal. However, people with much earlier version (CS version 8) don't get the option to keep layers, and the layers are flattened when the document is opened.
I still have CS5 on my mac, and I find that if I take my finished file into CS5 and save it there, the customer does not get the message above, and the file behaves as it should. Those on very early version of PS can also open the files without any issues.
I've been using CS6 since it was released and have had to delve through all my files and save them in CS5. Not every file is affected and I've been unable to find a common thread.
I've been getting this fatal error message upon opening files.
It seems to be as I try to load x-ref's.
I have succesfully installed Autodesk Inventor 2011 (Student License) on my Windows 7 (64-bit) operating system without any errors. I can open Inventor 2011, but when I try to open a new or existing file, Inventor suddenly closes and the 'Autodesk Inventor Error Report'-window opens, giving the following error:
Error: Unhandled Exception
When I go to my project folders and try to open any inventor file, the following message appears:
"Inventor.exe needs to register with he operating system and the following programs (Explorer) are running and may
prevent registration from succesfully completing. Autodesk recommends terminating the offending processes to ensure proper registration. Terminate these processes before continuing with the registration?"
If i cick 'Yes', the problem remains.
I've tried reinstalling, following the instructions carefully (installed as administrator), without success. I installed both service packs. I keep having the same problems, while in the past, it has been working perfectly, but I lost it because of hardware problems, which are now resolved.
Technical Info:
OS: Windows 7 64-bit
Processor: Intel(R) Core(TM) i5 CPU M430 @ 2.27GHz
4,00 GB RAM
ATI Mobility Radeon HD 5650
Some saved files will not reopen in CoreldrawX5 showing an error message 'Encountered an improper argument' and that is it! Very frustrating as all the work seems to be lost and needs to be redone.
View 4 Replies View RelatedI just installed PS CS3 Extended and tried to open a Google KMZ file and received the following error: "Could not complete your request because the file format module cannot parse the file" I also tried creating a new document and insert a new layer from 3D file and received this error:
"could not complete the new layer from 3d file command because of program error"
My system is an HP Mobile Workstation w/Intel Centrino Dou proc.
have encountered an error message on opening Lightroom 4 using Windows 7 Pro 32 bit.
The message is saying - Error in reading preview cache.
My main user folder on the iMac is set to be shared (read/write, including all enclosed files) with my MacBook Pro. The job is a series of one-page InDesign files (they are newspaper advertisements). The IDD files contain a series of Illustrator files with linked PSD files.The idea is that we can both work on the .idd and .ai files in the same folder at the same time.
It's all working fine EXCEPT that whenever an .ai file is opened on the MacBook, Illustrator doesn't know where the linked PSD files are. We can update the link, but when the .ai file is then opened on the iMac and saved, the same thing happens the next time it is opened on the Macbook.
I don't want to embed the PSD files into the .ai files as sometimes I have to modify them and they can be linked to up to 20 .ai files.
G5 iMac OSX 10.7.5 / Macbook Pro OSX 10.8.2 / networked via FireWire cable / file sharing on, laptop user has Administrator status, all files are read/write, permissions include all enclosed files / CS6
Date/Time: 2013-04-07 14:58:28 +0200
OS Version: 10.7.5 (Build 11G63b)
Architecture: x86_64
Report Version: 9
Command: Illustrator
Path: /Applications/Adobe Illustrator CS6/Adobe Illustrator.app/Contents/MacOS/Adobe Illustrator
Version: 723 (16.0.0)
Parent: launchd [132]
PID: 10493
Event: hang
Duration: 0.83s
Steps: 10 (100ms sampling interval)
Pageins: 19
Pageouts: 0
When I try and open CS6 I keep getting a message with Error 213:19. How can I fix this?
View 1 Replies View RelatedI am getting error 6 while opening Photoshop. What to do next ??
View 1 Replies View RelatedWhen I open my Photoshop CS5, I get a configuration error. It states Error:16. Do I have to uninstall/reinstall my program? I bought it through the adobe website and have misplaced my serial number. Would I be able to retrieve it?
View 1 Replies View RelatedOSx Maveriks + iMac27" late 2011 16Bg DDR
I have some trouble with some files and print/printer. This is the message I get.
This issue happens only with some files link this : LINK
With some others I have no problem at all.
Have restored PS preferences (hold down cmd+alt+shift while starting PS CC) , try to change default printer, try to uinstall ad reinstall PS CC with no success.
I get this error message upon startup:There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents. I can however print pictures with window's photo printing wizard so I know my printer is setup and selected. Can anyone tell me what I need to do in order to have photoshop CS4 recognize that my printer exists and is selected?
View 1 Replies View RelatedI am working in PS 7 OS 10.1.5. I have a file that was working on, saving as I went along. I closed the file and when I tried to reopen it, the file would not open. I get a message ... File can not be opened because of a program error...
View 9 Replies View RelatedI am working on a very important print project and the deadline is on tuesday. When I opened my *.psd files last night an error appeared at the end of the "Reading Photoshop format" progress:
Quote:
Could not complete your request because of a programm error.
The files can't be opened anymore...
I really need those files working for I don't have the time to re-do them. Can the files be recovered? (WinXP no-SP, Photoshop CS)