I keep getting the error message when I try to open this one project. Everyone else is getting the same message when opening it. It doesn't matter if it is a local file or a detached central file the same message comes up and closes Revit.
This is a 2011 Revit Architecture model but also crashes 2012.
When creating a PDF from a DWG AutoCAD LT 2010 (running on windows 7) I get the following error.
unhandled access violation reading 0x6a162be0 exception at 6a162be0h
This only happens the second time I create a PDF - the first time it is very quick and there are no errors
I have tried a repair and a reinstall but am still having the same issue.
I am getting a error when I open a specific drawing
FATAL ERROR: unhandled e06d7363h Exception at fel14940.
I have tried to recover the drawing (message says error were found and then I get the same error)
tried the back up file ...no go
tried a back up file from 2 weeks prior, same result.
Have tried inserting as a block to a new drawing... same error.
I have started receiving the following error:
FATAL ERROR: Unhandled Access Violation Reading 0x0008 exception at 1286aebh
I had been getting fatal errors on opening the program with the very same message. That has since passed but now it is happening when I try and open ADCENTER either at the command line or the ribbon button.
Map3D 2012
Intel Core2 Duo
2.66ghz
3gb ram
When AutoCAD is closed and I try to open a drawing from the Windows Explorer I get a fatal error and when AutoCAD is opened before opening the file from Windows Explorer everything works fine. We have this problem with several stations at our office.
View 4 Replies View RelatedI just changed my startup setting from 0 to 2 because I do not ever need a blank "Drawing 1" to work off of. Now I am wondering if that screwed something up because when I boot up AutoCAD and immediately try to open a Sheet Set, I receive the attached messages and then AutoCAD crashes. Is this a bug that needs to be fixed?
View 4 Replies View RelatedI've been getting this fatal error message upon opening files.
It seems to be as I try to load x-ref's.
using autoCAD 2009 everytime I open up the Layer Properties Manager, it causes a Fatal Error and autoCAD to shut down, this is a first and need need to know how to solve this problem or at least a diagnose.
View 1 Replies View RelatedEven though I run the Dwgconvert function in DwgTrueview 2012 I still can not open the converted file in AutoCAD Mechanical 2012 SP 2. Fatal error with some hex memory addresses displayed. DwgTrueview opens and displays the dwg. just fine. AutoCAD R14 & 2000 open the file with no problem as well.
View 3 Replies View RelatedEnvironment:
Files stored using SAMBA shares NetgearReady NAS
Two sites connected via WAN
Users using Windows 7 -64bit with Architecture 2014
Mapped drives are used for both site to access NAS, but use different drive letters.
At one point working the projects, users starting getting fatal errors opening from the share. All attempts to get past this failed and I thought the drawing or base files were corrrupt. However, when the files are moved locally to workstation and opened without issue. The users in one office are now working off this files using UNC \serverproject...
The interesting thing, is that users in the other office have no issues dealing with these drawings using on the NAS. The only difference is the WAN and drive mapping letter. This is how they have always worked and never had this issue. The only other thing I will add is they upgraded from 2010 two months ago, but no problems with any other projects.
Here is the end of the journal file:
'***********************************************************
'CT [Modifier la nomenclature ou les quantités]:
'{1} Dialog_Revit_ScheduleBar_a
'{458} Dialog_Revit_ScheduleBar_b
'{458} Dialog_Revit_ScheduleBar_c
'{458} Dialog_Revit_ScheduleBar_d
'{458} Dialog_Revit_ScheduleBar_e
[code]....
20 times now when i've tried to render to cloud i get the same fatal error message and tried this on different computer as well. it was fine and then tried one render and keep getting same message - see attachment.
View 1 Replies View RelatedWhen we use Point Cloud Feature Extraction for Autodesk® Revit® 2012 in our machine in a central file with the pcg file then there is a Run time error shown in revit. But if we work in a single file then the problem does not occur. How we ovecome this situation?
View 1 Replies View RelatedBeen using Revit 2011 for a couple of years and never had any problems until recently. I attempted to load a component file and got an Unrecoverable Error and Revit shut down. Now, it appears that any attempt to load or open a file from inside Revit results in this same problem. I have read multiple posts and solutions and wiped/reinstalled the program. Nothing has worked. I'm running it on XP.
View 2 Replies View RelatedI received this message:" Central model is corrupt and must be manually recovered" and do not know how to proceed.
View 1 Replies View RelatedCivil 3D 2010 was crashing for an employee. I uninstalled Civil 2010 and attempted to install 2011. He still has a fatal crashing error. I also removed his temp files.
View 7 Replies View RelatedI select an audio clip in timeline to open it in Source Window.
I try to change the IN POINT from inside the Source Window and I crash. Every time.
Then I click CONTINUE and get this:
I am running PPCC 7.2.2 (4) on a MacPro with 10.8.5 installed.
Ive been trying to install Adobe Photoshop CS4 trial for the past 3 days. The only reason I want to try it is because of its ability to create textures directly on models. But whenever I try to install, I get this error"Adobe Drive CS4Error:Error 1603. Fatal error during installation." Dispite it not saying that Adobe Photoshop CS4 having an error, I still get this screen ....
View 5 Replies View RelatedI am getting Error 1603. Fatal error during installation while installing photoshop Cs 6.
View 2 Replies View RelatedI'm trying to get down the bottom of what's causing an extremely serious error in the 64-bit version of Adobe Illustrator CS6.
Adobe Illustrator can open CorelDRAW .CDR files, to a certain extent. The .CDR files need to be saved down to version 9 or 10 compatibility. One of my coworkers just ran into a really bad Illustrator CS6 crash caused when opening a .CDR file. This is a crash I had to endure on my own new system a couple months ago.
After Illustrator CS6 64-bit crashes it simply refuses to launch again. It crashes and closes. Rebooting doesn't work. Deleting the AI prefs file doesn't work. Worse yet, the crash basically hoses all of the CS6 64-bit apps that are installed. The 64-bit version of Photoshop CS6 crashes when opening a file.
The last time this happened my only recourse was to do a "factory reset" on my computer, basically wiping the hard drive and reinstalling Windows 8 Professional in a clean state and then going through the very long, slow process of downloading and installing the CS6 apps from the Creative Cloud.
Are there any possible alternatives that might fix this error besides wiping the hard drive and starting over? This bug is pretty badly timed. Gonna have to go through all the download/install process stuff again when the new CC apps are released.
I just recently bought a new computer, so I thought I could at last use Photoshop CS3, but apparently it does not like jpg's that are rotated (with lossless jpg conversion) in Irfanview. Code:
View 2 Replies View RelatedI try to upload photo's from my i-Phone with the adobe photodownloader I get a fatal error and it needs to be closederror code c0000005adres 7c9109f9what can I do?it worked before and I don't think I changed anything besides updating i-tunes, i-phone software and firewall, virusscan etc.
View 3 Replies View RelatedI have made two attempts to download CS3 on a trial basis, each time at the end of the download I get a "fatal error " message. Why is this ?
View 8 Replies View RelatedWhy does Photoshop cs4 crash when opening a file? (Mac OS 10.6.8) I've rebuilt pref.'s and reinstalled Photoshop with no positive results. I can create a new file but cannot "place" anything because that crashes as well.
View 26 Replies View RelatedPhotoshop crashes when opening a file.
View 3 Replies View RelatedI run Illustrator CS6 on windows 7. Every time I try to start a new file or try to open a existing file the program crashes.
View 4 Replies View RelatedMy lightroom 4 instantly crash whenever I opened the import tab. I tried using a new catalog but it also crash.
View 5 Replies View Relatedi coded this simple utility that allows the user to edit some dbtext without using the mouse (after selection).
It works but sometimes, it seems randomly, i get a fatal error.
This is the code
public void Run(object param)
{
Document doc = Application.DocumentManager.MdiActiveDocument;
Editor ed = doc.Editor;
[Code]....
The run function it's called from a commandmethod with the CommandFlags.Session flag.
I keep on getting the fatal error messages like FATAL ERROR: unhandled Access Violation Reading 0xffffffff Exception at 1a89fc50h, when doing simple commands such as move, copy or selecting objects. It has also occurred when I've tried to save. They can occur up to 4 times a day .
I have tried emptying my temp folders and I've ensured my copy of AutoCAD 2011 LT is up to date but these are only temporary solutions as a few days later they will appear again.
I am trying to Install Adobe Photoshop CS4, but every time getting an error:
Adobe CSI CS4
Error:
Error 1603. Fatal error during installation.
If I see the Logs, here are few lines around searched pattern "1603".
5:5:21:968 -(Adobe)- -*-*-*-*-*-*-*-*-*-*-*-*- BEGIN - Adobe_ProtectedContent -*-*-*-*-*-*-*-*-*-*-*-*-
5:5:21:984 -(Adobe)- Requesting property: CustomActionData
5:5:21:984 -(Adobe)- Stream extraction to recordset
5:5:21:984 -(Adobe)- Number of Properties: 2
5:5:21:984 -(Adobe)- Name, Value: Count 0
5:5:21:984 -(Adobe)- Name, Value: Prop 3A4D8E3D83E0425FA8FBB04538CDC2A0
5:5:21:984 -(Adobe)- Acquired custom action data
5:5:21:984 -(Adobe)- GetMapProperty returned: Count = 0
5:5:21:984 -(Adobe)- No records to process
5:5:21:984 -(Adobe)- -*-*-*-*-*-*-*-*-*-*-*-*- END - Adobe_ProtectedContent -*-*-*-*-*-*-*-*-*-*-*-*-
[ 3584] Fri Mar 06 10:35:22 2009 INFO
5:5:22:437 -(Adobe)- -*-*-*-*-*-*-*-*-*-*-*-*- BEGIN - Adobe_FirewallAuthorize -*-*-*-*-*-*-*-*-*-*-*-*-
5:5:22:453 -(Adobe)- Committing firewall data. Inverted: 0
5:5:22:453 -(Adobe)- Requesting property: CustomActionData
5:5:22:453 -(Adobe)- Stream extraction to recordset
5:5:22:453 -(Adobe)- Number of Properties: 4
5:5:22:453 -(Adobe)- Name, Value: ProductName Adobe CSI CS4
5:5:22:453 -(Adobe)- Name, Value: InstallPath0 C:Program FilesCommon FilesAdobeCS4ServiceManagerCS4ServiceManager.exe
5:5:22:453 -(Adobe)- Name, Value: EnablePort0 5353
5:5:22:453 -(Adobe)- Name, Value: EnablePortProto0 6
5:5:22:453 -(Adobe)- Firewall interfaces initialized
5:5:22:453 -(Adobe)- Testing key: EnablePort0 Root: EnablePort Index: 0
5:5:22:453 -(Adobe)- Adding entry: Adobe CSI CS4 for port: 5353 with protocol: 6
5:5:22:468 -(Adobe)- Return code from operation: 1603
5:5:22:468 -(Adobe)- #_AdobeError_# 1603 ...
I get a fatal error (attached) when I hover over an mpolygon in a dwg file (also attached).
Map 3D 2011, SP2, Win 7 pro 64 bit.
I have tried audit - it did not fix the problem.