AutoCAD Inventor :: Warning If Saving As STL File In 2011?
May 10, 2012
We modeled parts in inches. We save as copy to an .STL file to get SLA prototypes made. The parts came back 2.54 times bigger than needed. Reason is the default setting for saving as .STL files is Centimeters.... Not sure why Autodesk did this....but yes I understand it's not their fault, we should have checked under options and changed it to inches.....we just assumed that you model in inches, it would save as in inches....See what happens when you assume....
I have a mass print script and I have it save then close the drawing after it's done printing each one. The problem is the script updates the mass properties and some times drawings just update when opened. So when it saves different "warnings" can pop up, which pause the script until the pop up is taken care of. The warnings are typically for saving other files like the ipt linked to a drawing or if the drawing was saved in an old version. Is there a way to just accept those while running a script so it does puase?
with saving on Photoshop CC? Quite often it has happened to me that I will hit Command+S, but I won't see the saving bar at the bottom of the document, and if I then close the document it won't prompt me to save, but if I close the file it won't be saved.
If before I close the file I go to the File menu, the "Save" option is grayed out (as if I had just saved), but the file is not saved. If I close the file, I loose all my work
I have lists of Documents I am altering and saving automatically in a loop, The problem is that if the file needs to be migrated you get a dialog box in your face for every file in the list. How can I temporarally turn the dialog off?
why I'd get this error when doing an Export to AutoCAD 2010/2007/2004...? It seems to be innocuous, and irrelevant, but it's disturbing none-the-less. I haven't been able to identify any reason why it appears, and all drawings seem to work normally, with no problems. AUDITs turn up no errors. So I've just been ignoring this message, but it's distracting. And it doesn't always appear... although I haven't been able yet to identify what causes it to appear in some drawings, and not others. I think it only ever happens when there's an XREF, but not sure... (Maybe when an XREF is in an older version of C3D/LDD/AutoCAD...?)
When I enter a Run File Name in the "Create Tube & Pipe Run dialog box I get the message "The path is too long. Try a shorter name." The name I entered is "Kappa 55 Suction Line", I also tried the Run File Name of "1" as a test and get the same warning message "The path is too long. Try a shorter name."
I'm getting this error (see attachment) when I try to open an NX file in Inventor 2011. I've downloaded the file from a data transfer site and I can preview the part in the preview window, but it does not open properly. This is the first time this has happened, as I've converted files before with no problem.
in inventor 2009: i linked parameter of 3D design from excel file. If i change the value on excel file --> dimension of 3D design will change. It work fine.
So, in inventor 2011, i can not do it: when change the value on excel file, 3D model does not change dimension.
I have unchecked resolve file references, etc, and still basically spends 5 minutes looking for files i told it not to look for. Why doesnt it just open the assembly or drawing, without waiting for ever?
I opened a document and it popped up a messages asking if I want to revert to the saved version YES or NO. This is weird because I didn't try to open the document twice. I suspect it is a macro that was causing this problem but I have many so it could take a while to locate the culprit. I also suspect a windows 7 update may have caused an interference with the macro.
I'm linking an excel file to an .ipt file with iLogic code determining if the Material type is a certian value it will find the correct material thickness. These file work great when working on them thru Vault but when I "Save As Template" and create this file where our other template files are located (not Vault) this fuction does not work. I have realized that I had to place the a copy of the excel file in the same file folder as the template ipt, but even this does not fix the issue.
I recieve this error:
Error in rule: Material, in document: Part6
'MWW Materials (Inventor).xlsx' could not be found. Check the spelling of the file name, and verify that the file location is correct.
If you are trying to open the file from your list of most recently used files, make sure that the file has not been renamed, moved, or deleted.
It seems completly countintutive that just saving the file as a template file would cause this not to work when all files that are required are located in the same file folder. Maybe I need a reference to the excel document within the iLogic code.
So we have inherited files from another company and there are some files which have begun crashing once the save command is initiated. Typically, the file seems to be saving for about 5-10 minutes, and then it gives a "FATAL ERROR: Cannot write to undo file (probably disk full)" alert. This obviously crashes the application without saving the file. The files that crash are the sheet files into which we have multiple xrefs which are overlays, not attachments. There are 4 xrefs in these files. I don't see why this would be a reason for the application crashing, but it's all I can think of that may be the problem.
My model is ~1-2MB and I'm trying to 3D print it. I am trying to export it as a .stl file but no matter how I try doing it (going through the print piece flow or export flow), the file is either 84 bytes or 0KB.
Is this a known issue, or am I doing something worng?
Sub cameraAndSaveAsBitmap(ByVal GelenYol As String) 'Bu kod açık dosya üzerindeki parçayı geni açıya alıyor ve görüntüyü 'c: emp dizini içerisine DosyaAdı.bmp olarak kaydediyor.
[Code]....
But I want to seve as jpg instead of bmp format...
I am wanting to create a .ipt (part) file in Inventor 2012, save it as a .stl file, and open it up in Project Falcon to test it in the wind tunnel.How do you save an .ipt file as a .stl file in Inventor 2012? I hav tried going to "Save as..." and changing the extention to .stl, but not luck there.
I am using Inventor 2012 and C#. I would like that, when I close my Form, Inventor and all files that are open will be closed with displaying the message about saving the files .Some of my opened file are stored in Lists.
This code das not work Inventor still asking me about saving the files.
private void Form1_FormClosed(object sender, FormClosedEventArgs e) { if (InventorOpen._started) { oDrawDoc.Close(false); foreach (Inventor.AssemblyDocument openAssemDocument in openAssemDocumentsList) { openAssemDocument.Activate();
When I try to save a 2 D drawing as a DXF file, I get a box saying "problems encountered while saving the document". I am using version 2012. My older version did this operation without a problem.
I took an existing assembly from one specidifc directory and copied it to another location. Then one part by one I use the replace command to swap out the parts to map to the new location because when I went to iproperties it was still pathing to the old location. I change the new parts physical features (i.e. length, diameter).
I get done with it and all references are pointing to the new location.
I exit out of inventor and call up the new assembly and it has mate errors because the parts are all of the old ones from the original location. Why is it not remembering or retaining the new parts and there locations?
Even when I have gotten this screen I have selected "No" to the bottom (2nd) selection which is the original location I do not want.
I have only been using Inventor since late winter . I have create a "master" folder with an assembly, drawing, and excel cutlist. This folder also contains sub folders with the sub-assemblies and parts.
In my master assembly I created ILogic rules to change dimensions of the parts, to select different profiles and to select different sub assembly configurations (on/off). It works fine as is.
Now, the idea was to copy the whole "master" folder and rename it to a job, launch the master assembly and configure it, then save it. The issue is that, even though the master assembly is in a new folder, it still references the sub-assemblies and parts from the "master" folder. How do I write a rule to "save as" all these sub-assemblies and parts to the new location?
Trying to create a bit of code that when the 'OnNew Document' event is fired the code checks for a particular Custom Property. Depending on what the Custom Property is set to a form is then fired with relevant text to point the user to a specific area in the workspace. Al this works ok.
But if they press cancel i need the code close the activate 'Part1' which inturn then allows the user to select 'New' to begin again.
I have tried various scenarios but the main problem is that Inventor then crashes!
PublicSub applicationEvents_OnNewDocument(DocumentObject As Inventor._Document, BeforeOrAfter As Inventor.EventTimingEnum, Context As Inventor.NameValueMap, ByRef HandlingCode As Inventor.HandlingCodeEnum) Handles applicationEvents.OnNewDocument
I am copying objects to a new database and and cloning as an Entity type succesfully for all objects.When I save the database to a new file I get the attached error
'Warning: An error occurred during save....'
I have isolated this to Polylines and have tried to Process as Type PolyLine but still get the error.Here is the code I use for the polyline.(My entity processing code is identical except for object type).
Dim MyPolyLine As DatabaseServices.Polyline MyPolyLine = CType(myObjID.GetObject(DatabaseServices.OpenMode.ForRead), _ Database Services.Polyline)Dim NewEntity As DatabaseServices.Polyline = CType(MyPolyLine.Clone, _ DatabaseServices.Polyline)NewEntity. Set Database Defaults(NewDB) NewBTR.AppendEntity(NewEntity)NewTrans.AddNewlyCreatedDBObject(NewEntity, True)NewEntity.Layer = MyPolyLine.Layer NewEntity.Linetype = "ByLayer"NewEntity.Material = "ByLayer"
For the past couple of months we have noticed we are loosing files on the save command with no warning or notice. When the drawing is saved and then closed we discover that occasionally the file did not save and the original version of the file is lost. Sometimes the original version gets saved as a bak file but not always. No warning message shows up to inform that the command was not completed correctly, it looks like the save took place.
Recently we switched to Windows 7, 64 bit machines. All three machines this has occured on match and are saving back to 2010 version. One of the machines is running a trial version of Architecture 2011, the other two are running network licenses of Architecture 2012 with Service Pack 1. The files being lost are all located on a server in the same folder structure, not in the same folder. That server is new and has some sort of mirroring set up to image files to multiple locations? This phenomenon has only been noticed to occur on saving a file from Architecture. We do save other file types to the same folders and have not noticed any going missing. To my knowlege the files never show back up (one of our IT staff suggested the mirroring might be causing a delay in the file showing up in the folder.)
I use a machine called a shopbot to cut wood projects. Students draw the parts in Inventor, place them into a idw and use the save copy feature to save it as a DXF file. The shopbot uses a progam called partworks v2 and it reads DXF files. This worked great for the past few years until this summer when we installed the 2013 inventor on our computers. I contacted Shopbot and they said other people are having the same problem and the solution for most of them was to save the idw file as an older version. Last year we had AutoDesk 2011 and it worked fine. how I can save a 2013 idw as a 2011 idw?
I'm having a problem with the files saved from Inventor, regardless of type. I have no problem saving new files or opening files, however, any time I try and save changes to a file, inventor crashes. Also if I try and move a file, windowes explorere gets stuck at "descovering items." Renaming a file crahses explorer.