AutoCAD Civil 3D :: 2011 / 2012 - Warning - An Error Occurred During Save
May 3, 2012
why I'd get this error when doing an Export to AutoCAD 2010/2007/2004...? It seems to be innocuous, and irrelevant, but it's disturbing none-the-less. I haven't been able to identify any reason why it appears, and all drawings seem to work normally, with no problems. AUDITs turn up no errors. So I've just been ignoring this message, but it's distracting. And it doesn't always appear... although I haven't been able yet to identify what causes it to appear in some drawings, and not others. I think it only ever happens when there's an XREF, but not sure... (Maybe when an XREF is in an older version of C3D/LDD/AutoCAD...?)
I am copying objects to a new database and and cloning as an Entity type succesfully for all objects.When I save the database to a new file I get the attached error
'Warning: An error occurred during save....'
I have isolated this to Polylines and have tried to Process as Type PolyLine but still get the error.Here is the code I use for the polyline.(My entity processing code is identical except for object type).
Dim MyPolyLine As DatabaseServices.Polyline MyPolyLine = CType(myObjID.GetObject(DatabaseServices.OpenMode.ForRead), _ Database Services.Polyline)Dim NewEntity As DatabaseServices.Polyline = CType(MyPolyLine.Clone, _ DatabaseServices.Polyline)NewEntity. Set Database Defaults(NewDB) NewBTR.AppendEntity(NewEntity)NewTrans.AddNewlyCreatedDBObject(NewEntity, True)NewEntity.Layer = MyPolyLine.Layer NewEntity.Linetype = "ByLayer"NewEntity.Material = "ByLayer"
I am using AutoCAD Civil 3D 2011 and everytime I export a model to AutoCAD format I get the message:
"Warning and error occurred during save. We recommend that you run RECOVER on the drawing"
Although it usually finds one fault during Audit or Recover and fixes that, the message still persists in appearing every time I use the export function. Why this happens and how I can sort it out?
Illustrator won't let me save! It says "Unknown error has occured." I only have line work and text I placed from AutoCAD as a DWG file on the artboard and I was going to color the rooms in Illustrator.
I am not able to save my files and illustrator gives the message 'An Unknown Error has occured'. In a previous discussion transparency is called out as the culprit however I am not using transparency in my document and have checked all the items. I have also tried copying the work into a new ai file however this also will not save. This is has happened to me about 5 times since I updated to CS6.
Update - I just closed Illustrator and lost all my work and then an Adobe update window showed up asking me to update Adobe Air. I recall an Adobe Update window appearing once before when I had problems solving. Could the Adobe update window interfere or prevent me from saving my documents?
I have illustrator cs6 and when I try to put some text and save, it appears de message bellow: "An unknown error has occurred". This error only occur in my computer and also with a new file. I've tried opened the file in another computer and I can save with text. Is it something wrong with my computer?
When pushing F1 for help in 2012 Civil 3D regarding this feature, it takes me to a page about migrating custom files over.
It says to copy the pipe/structure files over, then to open up Civil 3D and type in PIPECATALOGREGEN. Well, it doesn't work and says that it is an unknown command.
We modeled parts in inches. We save as copy to an .STL file to get SLA prototypes made. The parts came back 2.54 times bigger than needed. Reason is the default setting for saving as .STL files is Centimeters.... Not sure why Autodesk did this....but yes I understand it's not their fault, we should have checked under options and changed it to inches.....we just assumed that you model in inches, it would save as in inches....See what happens when you assume....
Autodesk has agreed that this code does not work on Inventor 2012 and that the development is working on it. This code is part of the Snippets built in Inventor iLogic Rule Browser.
Occasionally I get the following message when trying to add data shortcuts.
"The drawing has not been saved yet, please save the drawing before creating data shortcuts" Only I have saved, this still occurs after either a full or quick save.
Shutdown Civil and reopen still gives the same message..The problem seems to be when you are saving to any other version of Autocad than R2010. Save as R2010 and it works.Mike Evans
Civil3D 2013 / 2014 British UK Windows 7 Professional 64-bit Intel(R) Core(TM) i7-3820 CPU @ 3.60GHz (8 CPUs), ~4.0GHz With 32768MB RAM, AMD FirePro V4900, Dedicated Memory: 984 MB, Shared Memory: 814 MB
Ive been trying to install Adobe Photoshop CS4 trial for the past 3 days. The only reason I want to try it is because of its ability to create textures directly on models. But whenever I try to install, I get this error"Adobe Drive CS4Error:Error 1603. Fatal error during installation." Dispite it not saying that Adobe Photoshop CS4 having an error, I still get this screen ....
I'm using AutoCAD 2012 version 18.2. I need to programmatically open .dxf file, change font and save as .dwg version AC1800. I do it with the following code [URL] .... The problem is that after saving as AC1800 and open the result file, Autocad says that some errors occurred and offer to recover file. After this it works fine. If I save as DwgVersion.Current or DwgVersion.Newest it works fine.
I get the following error (in the event log) when C3D 2012 starts:
Service cannot be started. The file resolves to a path that is too long. The maximum length is 260 characters. [ File name = C:ProgramDataAutodeskContent ServiceServerContentServiceDBConnect.MetaStore.sdf ]
When plotting profile plan sheets, there is an error in the scaling of the grids. I can not seem to figure out why the plotter is not plotting correctly. I did try creating a pdf of the plan sheet and plotting, but still have the same scale error. It starts to get off scale after about 500 feet, so the error in scale is small, but still there. It is off by about 2 or 3 feet at 500 feet on the profile grid.
I've been using ACAD LT 2013 successfully, until the message started flashing on my screen "Sync Error, A customization sync error has occurred" It does not allow me to turn it off.
I just installed an educational version of Autocad 2014 for school and am encountering some major problems. The program works fine at first, but after I close it and reopen the application it starts to bug out. If I try to ask my layers after I reopen the program, Unhandled exception has occurred in a component in your application.
If I close the program and try to reopen, the opening screen gives me the same error message. I've installed and reinstalled the programs multiple times over the server, but still no difference.
we've made a part from an assembly and put the stress analysis to the test. Unfortunately the analysis doesn't complete it's run, because of an error:
"An error occurred while creating the finite element mesh. The cause may be invalid geometry or features that are extremely small in comparison to the overall dimensions of the part. To fix the problem, please suppress those problematic features or use standard meshing method."
We can't change the thickness of the sheet-metal, because it's a model which comes from a supplier with a different cad-program. And supressing any features isn't possible, because it's a base-solid.
But where can we change it to the standard meshing methode? The program is recently re-installed on my computer, the settings haven't changed since it's been installed. We can't find the feature.
i am using autocad 2013 student version at home and at college i am using autocad 2012. so when i create drawing in 2013,dosent open on 2012"it says incompatible version". i like to save all my dwg files automatically in 2011 format, i dont want to click save as and change it 2011 format.what i need is whenever i finsh working on drawing, if click save it should automatically save in 2011 format.
I have made a block with consist of shape drawing and some attribute data that must specified when the block inserted. my question is, how to make "warning error input" appear if mistake input occurs?
IM having a problem with my xara file... it gives me a read error occurred.. i tried to solved it but i failed, although i can see it in preview and no change in file size..
For the past couple of months we have noticed we are loosing files on the save command with no warning or notice. When the drawing is saved and then closed we discover that occasionally the file did not save and the original version of the file is lost. Sometimes the original version gets saved as a bak file but not always. No warning message shows up to inform that the command was not completed correctly, it looks like the save took place.
Recently we switched to Windows 7, 64 bit machines. All three machines this has occured on match and are saving back to 2010 version. One of the machines is running a trial version of Architecture 2011, the other two are running network licenses of Architecture 2012 with Service Pack 1. The files being lost are all located on a server in the same folder structure, not in the same folder. That server is new and has some sort of mirroring set up to image files to multiple locations? This phenomenon has only been noticed to occur on saving a file from Architecture. We do save other file types to the same folders and have not noticed any going missing. To my knowlege the files never show back up (one of our IT staff suggested the mirroring might be causing a delay in the file showing up in the folder.)
