AutoCAD Inventor :: Saving IPT File Message

Mar 8, 2012

I get this every time i try to close an .ipt.

The current operation requires data from docuemt {location on my network{ but it cannot be found.

View 1 Replies


ADVERTISEMENT

AutoCAD Inventor :: Error Message When Saving To Style Library

Jan 8, 2014

info on the following error message when saving to the style library.

View 5 Replies View Related

Illustrator :: This File Cannot Be Found - Error Message When Saving Document

Dec 19, 2013

Strangely, every time I click "save" in CS6 it opens up a 'Save As' window, (which shouldn't happen), then I click save witht the existing file name (it then tells me the doc already exists), I click OK, (and then OK to the next popup window) then get the message that "This file cannot be found".  I'm forced to click "ok" and the doument isn't saved.  I've tried saving it differently in previous versions and it still doesn't work.  I recorded a video of this behavior. You can see it here - [URL]
 
Why would it be trying to find a file?  It seems like an error message when trying to Open a doc, not Save a doc. I can't shutdown my station until I get the document to save.

View 8 Replies View Related

AutoCAD Inventor :: ILogic Message Box At File Open?

Oct 2, 2013

My goal is to have a message box open as soon as an assembly file is opened so that other users will be warned/ notified of linked parameters.  My assumption is that an iLogic rule would be the best way to handle this.

I can create the message box, but when I looked through the iLogic snippets I didn't find any way to trigger the box at opening the file.

Inventor 2013 (SP2 Update 2), Windows 7 Professional (64-bit), SP1, Intel Xeon 3.07GHz CPU, 12GB RAM, NVIDIA Quadro 2000, Vault Basic 2013

View 3 Replies View Related

AutoCAD Inventor :: Later Version Of This File Has Been Saved / Message

Nov 7, 2011

One of our users, lets call him USER1, has recently received the following message when attempting to save an assembly:

"A later version of this file has been saved by USER1.  Saving the file would overwrite changes which is not allowed.  If you wish to preserve your changes, use the Save Copy As command."

To get to this error message, our user opens an IDW, then the IAM linked to that drawing. Changes made in the IAM are changing bolt lengths, adding fasteners from content center, things like that.  After saving inside the IAM this message appears.   There are multiple users on our network; but only this user is working the assembly in question when the message appears?

what makes this message appear, and how it can be avoided? 

View 1 Replies View Related

AutoCAD Inventor :: Tube And Pipe Run File Name Warning Message

Jan 24, 2012

When I enter a Run File Name in the "Create Tube & Pipe Run dialog box I get the message "The path is too long.  Try a shorter name."  The name I entered is "Kappa 55 Suction Line", I also tried the Run File Name of "1" as a test and get the same warning message "The path is too long.  Try a shorter name."

View 3 Replies View Related

AutoCAD Inventor :: IPT File - No Visible / Unadaptive Sketches Message

May 23, 2013

My .ipt file has a shared sketch that is visible and not adaptive.

But When I attempt to make a second extrusion from the sketch, a message says, "No visible, unadaptive sketches".

I could create another sketch, but I want to learn how Inventor is working because I have had this error before.

The file is attached (I am trying to extrude from the "binder" sketch).

View 3 Replies View Related

AutoCAD Inventor :: ILogic Error Cannot Find Excel File After Saving File As Template

Dec 6, 2012

I'm linking an excel file to an .ipt file with iLogic code determining if the Material type is a certian value it will find the correct material thickness. These file work great when working on them thru Vault but when I "Save As Template" and create this file where our other template files are located (not Vault) this fuction does not work. I have realized that I had to place the a copy of the excel file in the same file folder as the template ipt, but even this does not fix the issue. 

I recieve this error:

Error in rule: Material, in document: Part6

'MWW Materials (Inventor).xlsx' could not be found. Check the spelling of the file name, and verify that the file location is correct.

If you are trying to open the file from your list of most recently used files, make sure that the file has not been renamed, moved, or deleted.

It seems completly countintutive that just saving the file as a template file would cause this not to work when all files that are required are located in the same file folder. Maybe I need a reference to the excel document within the iLogic code.

View 3 Replies View Related

AutoCAD Inventor :: Error Message File Needs To Update When Opening 2012

Oct 20, 2011

OK then update. I select never show this message agian ever (my favorite ) - but guess what a it pops back up. Nothing is wrong with the assembly

View 1 Replies View Related

AutoCAD Inventor :: STL File Saving As 0kb

Jun 13, 2012

My model is ~1-2MB and I'm trying to 3D print it. I am trying to export it as a .stl file but no matter how I try doing it (going through the print piece flow or export flow), the file is either 84 bytes or 0KB. 

Is this a known issue, or am I doing something worng?

I've tried restarting the program/my environment.

View 8 Replies View Related

AutoCAD Civil 3D :: Error Message - Prevents Saving

Sep 20, 2010

The message reads "One or more objects in this drawing cannot be saved to the specified format. The operation was not completed and no file was created." I am using AutoCad Civil 3D 2011.

View 3 Replies View Related

AutoCAD Inventor :: Saving ActiveView As Jpg File?

Mar 29, 2013

I can save as bitmap (bmp) camera view below

 Sub cameraAndSaveAsBitmap(ByVal GelenYol As String)
'Bu kod açık dosya üzerindeki parçayı geni açıya alıyor ve görüntüyü
'c: emp dizini içerisine DosyaAdı.bmp olarak kaydediyor.

[Code]....

But I want to seve as jpg instead of bmp format...

View 2 Replies View Related

AutoCAD Inventor :: Saving IPT As STL File In 2012

May 24, 2012

I am wanting to create a .ipt (part) file in Inventor 2012, save it as a .stl file, and open it up in Project Falcon to test it in the wind tunnel.How do you save an .ipt file as a .stl file in Inventor 2012?  I hav tried going to "Save as..." and changing the extention to .stl, but not luck there.

View 3 Replies View Related

AutoCAD Inventor :: C# Close File Without Saving?

Mar 15, 2012

I am using Inventor 2012 and C#. I would like that, when I close my Form, Inventor and all files that are open will be closed with displaying the message about saving the files .Some  of my opened file are stored in Lists.

This code das not work Inventor still asking me about saving the files.

 private void Form1_FormClosed(object sender, FormClosedEventArgs e)
        {
            if (InventorOpen._started)
            {
                oDrawDoc.Close(false);
                foreach (Inventor.AssemblyDocument openAssemDocument in openAssemDocumentsList)
                {
                    openAssemDocument.Activate();

[code]....

View 8 Replies View Related

AutoCAD Inventor :: Saving A Drawing As DXF File

Jul 17, 2012

When I try to save a 2 D drawing as a DXF file, I get a box saying "problems encountered while saving the document". I am using version 2012. My older version did this operation without a problem.

View 8 Replies View Related

AutoCAD Inventor :: Saving As Assembly To Another File Name?

Feb 14, 2012

I took an existing assembly from one specidifc directory and copied it to another location.  Then one part by one I use the replace command to swap out the parts to map to the new location because when I went to iproperties it was still pathing to the old location.  I change the new parts physical features (i.e. length, diameter).

I get done with it and all references are pointing to the new location.

I exit out of inventor and call up the new assembly and it has mate errors because the parts are all of the old ones from the original location.  Why is it not remembering or retaining the new parts and there locations?

Even when I have gotten this screen I have selected "No" to the bottom (2nd) selection which is the original location I do not want.

View 9 Replies View Related

AutoCAD LT :: Fatal Error Message When Saving Drawing In 2012?

Apr 15, 2013

We have AutoCad LT 2012 version. We encounter fatal error when we save the drawing. we cannot finish our job because everytime we save our work it will show a messsage FATAL ERROR.

View 5 Replies View Related

AutoCAD Inventor :: Saving Parts To New File Location

Jun 29, 2012

I have only been using Inventor since late winter .  I have create a "master" folder with an assembly, drawing, and excel cutlist.  This folder also contains sub folders with the sub-assemblies and parts.

In my master assembly I created ILogic rules to change dimensions of the parts, to select different profiles and to select different sub assembly configurations (on/off).  It works fine as is.

Now, the idea was to copy the whole "master" folder and rename it to a job, launch the master assembly and configure it, then save it.  The issue is that, even though the master assembly is in a new folder, it still references the sub-assemblies and parts from the "master" folder.  How do I write a rule to "save as" all these sub-assemblies and parts to the new location?

View 4 Replies View Related

AutoCAD Inventor :: Warning If Saving As STL File In 2011?

May 10, 2012

We modeled parts in inches.  We save as copy to an .STL file to get SLA prototypes made.  The parts came back 2.54 times bigger than needed.  Reason is the default setting for saving as .STL files is Centimeters....  Not sure why Autodesk did this....but yes I understand it's not their fault, we should have checked under options and changed it to inches.....we just assumed that you model in inches, it would save as in inches....See what happens when you assume....

View 5 Replies View Related

AutoCAD Inventor :: Saving A Part File From Simulation

Nov 25, 2013

it is possible to save a stressed part from a simulation in Inventor as an .ipt in its displaced condition?

View 1 Replies View Related

AutoCAD Inventor :: Closing Active File Without Saving?

Mar 27, 2013

Trying to create a bit of code that when the 'OnNew Document' event is fired the code checks for a particular Custom Property. Depending on what the Custom Property is set to a form is then fired with relevant text to point the user to a specific area in the workspace. Al this works ok.

But if they press cancel i need the code close the activate 'Part1' which inturn then allows the user to select 'New' to begin again.

I have tried various scenarios but the main problem is that Inventor then crashes!

PublicSub applicationEvents_OnNewDocument(DocumentObject As Inventor._Document, BeforeOrAfter As Inventor.EventTimingEnum, Context As Inventor.NameValueMap, ByRef HandlingCode As Inventor.HandlingCodeEnum) Handles applicationEvents.OnNewDocument

[Code]....

View 1 Replies View Related

AutoCAD Inventor :: Saving 1013 Idw File To An Older Version?

Oct 1, 2012

I use a machine called a shopbot to cut wood projects.  Students draw the parts in Inventor, place them into a idw and use the save copy feature to save it as a DXF file.  The shopbot uses a progam called partworks v2 and it reads DXF files.  This worked great for the past few years until this summer when we installed the 2013 inventor on our computers.  I contacted Shopbot and they said other people are having the same problem and the solution for most of them was to save the idw file as an older version.  Last year we had AutoDesk 2011 and it worked fine.  how I can save a 2013 idw as a 2011 idw?

View 5 Replies View Related

AutoCAD Inventor :: 10 Network Version Crashes When Saving File Changes?

Jun 3, 2013

I'm having a problem with the files saved from Inventor, regardless of type. I have no problem saving new files or opening files, however, any time I try and save changes to a file, inventor crashes. Also if I try and move a file, windowes explorere gets stuck at "descovering items." Renaming a file crahses explorer. 

One of the files is attached.

View 9 Replies View Related

AutoCAD Inventor :: Pro 2014 Crashes When Saving Older File

Oct 21, 2013

I have a situation where a teacher in our PLTW(Project Leads The Way) who uses inventor products for sometime is not able to save a old current project or make changes to this project, then save it. What is happening is it gives a blue screen error and corrupts the file so it cannot be fixed or opened. We cannot duplicate the process with the teacher, but we can if the file is opened on another computer and it is opened also on another computer at the same time as other pc. However, the teacher states that he doesn't have it open on any other PCs in the school.

View 2 Replies View Related

AutoCAD Inventor :: 2009 Creates XLS File When Saving Assembly Drawing

Jan 19, 2012

Inventor 2009 creates XLS file when saving assembly drawing (IDW file).Why? How to get rid of that?

View 6 Replies View Related

AutoCAD Inventor :: Saving Part And Assembly File In Lower Version

Apr 27, 2012

I would like to save my inventor Part and Assembly model file in a lower version. Like in our company we use both Inventor 2012 and 2010. Once the file is created in 2012 and when shared to 2010 users they are unable to open, is there any possiblities to open 2012 files 2010 like how we do in Autocad.

View 2 Replies View Related

AutoCAD Inventor :: Saving File As PDF Launches Adobe Reader When Don't Required

May 14, 2012

Like the subject says. I know there is a place to check or uncheck whether you want Adobe Reader to launch after you have saved a file to .pdf but for the life of me I can't remember where that is located.

Inventor 2012
Windows 7 64 Bit

View 1 Replies View Related

AutoCAD LT :: Automatic File Saving Is Not Saving Temp Files?

May 7, 2013

AutoCAD LT 2012

I had my automatic save set up for every 10 minutes but files were not being saved regularly. I deleted files from the Temp folder thinking it was full and now there are no .sv$ saving at all. How can I make drawings save automatically every 10 minutes?

View 6 Replies View Related

Photoshop :: Error-message After Re-Saving.

Sep 20, 2004

So, I have a .PSD file I want to Re-save Over the existing one already on the hard-drive, but everytime I save the file it says the file is "Locked, unlock it in Properties, via Internet Explorer options".

Well, none of the layers in the file are locked. I tried the settings on my computer and didn't find any option that related to the error. The question is, What type of setting in Internet Explorer might have caused this, and How do I fix it?

After that, I tried saving a Different file I was working on, and it saved- with no Error-message.
Is it a security setting? But, if so- why does this problem only occur with This file and not others?

View 6 Replies View Related

Photoshop :: Odd Error Message Given When Saving A...

Jun 23, 2008

I am running Photoshop CS3 Extended on a Windows XP Pro, with SP2 installed. The computer has two hard drives installed. On all previous versions of Photoshop I've been able to save a file to my 2nd hard drive easily by typing "D:image.jpg"

When I try to do the same in Photoshop CS3 I get an error message that says "could not save as d:d:image.jpg because the file name was invalid"

So I have to hit SHIFT+CTRL+S then type "d:" and then type a file name, making it a 2 step procedure to save a file now. If I don't follow this procedure, and just type the filename it saves the file on drive C: in a subdirectory.

Obviously it's a path error, but I've never had a problem with a straight out command "D:image.jpg" on previous versions and looking at the Preferences options or doing a search for this error didn't shed any light on this issue.

View 2 Replies View Related

Photoshop :: Error Message When Saving For Web And Devices

Jul 21, 2012

I cannot save for web and devices for some reason. I get the error message shown in the screen shot below.
 
I'm using CS5 extended, version 12.1, 64 bit. My OS is windows 7. It doesn't matter whether it's a JPG file or a PSD, I get the same error message, and I am unable to find a solution so far.

View 10 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved