AutoCAD Inventor :: Later Version Of This File Has Been Saved / Message
Nov 7, 2011
One of our users, lets call him USER1, has recently received the following message when attempting to save an assembly:
"A later version of this file has been saved by USER1. Saving the file would overwrite changes which is not allowed. If you wish to preserve your changes, use the Save Copy As command."
To get to this error message, our user opens an IDW, then the IAM linked to that drawing. Changes made in the IAM are changing bolt lengths, adding fasteners from content center, things like that. After saving inside the IAM this message appears. There are multiple users on our network; but only this user is working the assembly in question when the message appears?
what makes this message appear, and how it can be avoided?
View 1 Replies
ADVERTISEMENT
Nov 20, 2011
I just want to know how will I open a drawing file if its saved on an older version and I am using a latest version of autocad.
View 9 Replies
View Related
Mar 4, 2011
i only saved a png version of the file (no xcf or any file with history).if you click on this link you can see the before (top) and after (bottom) versions of the logo: URL....
What filter (or combination of filters it may have been?)
View 9 Replies
View Related
Feb 1, 2012
The computer at work is saving the 'old version' files in the parent folder instead of the old versions sub-folder. Where is the setting for changing this?
IV 2012 Pro Suite
View 4 Replies
View Related
Jul 18, 2013
When I edit a picture and save the result (using either "save" or "save as" and making sure there are ticks in "Save in Elements Organiser" and "Save in version set with original"), the edited copy is often (perhaps 3 times out of 4) treated not as a new version but as a new file. When I close the edit, I am told that there is a new file in a watched folder. When I accept this, I am offered any tags which were applied to the original (which works a bit) but then have to find my way to the edited file and the original, and manually make them into a set. It adds a couple of minutes to each edit. I am using Photoshop 11 on a Windows 8 laptop with a 1000GB hard disc (with about 100GB free). My catalog is quite big- about 70,000 items. I am a long-time Elements user (since the original?). This problem is fairly new (ie months not years)- certainly since I moved to V11. This is independent of the format of the original (in my case, RAW or jpeg) or the edited file (in my case usually jpeg).
View 6 Replies
View Related
Jun 11, 2012
I am unable open some part files and assebly files which are made in 2012 version. I have 2011 version.
View 2 Replies
View Related
May 31, 2013
how to move a file in inventor from the 2014 version to last years version which was 2013 because my teacher's computer isn't reading my file.
View 5 Replies
View Related
May 1, 2010
With the sad fact that we have to save files into older versions of Corel for other people to open in their Corel Draw, is there an easy way to check an existing CDR file to see which version it is saved in? File-Document Properties DOES NOT seem to do it, although that would be a great place to have it.
View 15 Replies
View Related
Jun 13, 2013
Recently upgraded from PSE 7 to PSE 11.
Now I'm unable to open .tga files I created/saved in PSE 7.
View 1 Replies
View Related
May 2, 2012
I have a capstone lab project due tomorrow for my graphic arts class and I made a HUGE mistake!!! I created an image using 20 something layers and did SAVE AS as a .xcf image (with all layers open). Part of the project was to save in different formats: .xcf (with open layers), a .png, and a .jpeg (optimized). So, I did the first save and then flattened the image to SAVE AS a .png with a different file name.
Long story short, I was tired and had way too many images open at once. When I was closing all of the images I accidentally saved the changes (flatten image) to my original .xcf (with open layers)!!!! Now, my .xcf that is supposed to have open layers only has one layer...the finished project!! I tried going to the file properties to restore a previous version, but it says that no previous versions were found! I also downloaded a norton "unerase" utility, but maybe I am not scanning properly to locate the file!?!
View 3 Replies
View Related
Jul 10, 2013
I keep getting a message that "folders and files cannot be saved when AutoDesk 360 is not running. Start AutoDesk 360 and try again"
I look up on my menu bar and notice: Aguirre64 (my AutoDesk User ID) is on. WHy do I get the message when I am clearly logged on?
View 1 Replies
View Related
Apr 11, 2011
I managed to change a setting to where my files are being saved in a library folder and I can't edit them. I don't wish to continue with this nonsense. I want to be able to edit the files. I am not using a vault but still get a message that the file I am trying to open is not signed out to me. How did I manage to mess my settings up this badly. I don't remember changing any of my settings.
View 7 Replies
View Related
Mar 8, 2012
I get this every time i try to close an .ipt.
The current operation requires data from docuemt {location on my network{ but it cannot be found.
View 1 Replies
View Related
Apr 3, 2013
How can I check with which autocad version a drawing is saved?
View 8 Replies
View Related
Nov 19, 2012
C3D2012 SP2.1
What I have is a nice production drawing, that has NEVER even been opened in C3D2013. I JUST finished adding labels for some new pipes and structures that are in an Xref. I saved the drawing and closed it to work on a different project while plotting. In SSM, I select the sheets to Publish, the first 4 plot without issue, then I get a CER without a Fatal Error...I can still work on the nbow current drawing...it appears that SSM crashed while loading the aforementioned sheet I had been working on.I close everything down, restart C3D2012, open the same drawing I had just labeled, says it needs to be recovered, so I let it finish loading (I've found that stopping the load will almost always cause C3D to hang indefinitely), close that drawing, then run recover, finds 2 errors, allow to fix, am greeted with the message box "This drawing has been saved by a newer version of C3D. All C3D commands are disabled in this drawing."
Wait a dang minute, SSM crashes and somehow (the save time is still the same as when i manually saved it in 2012) saves it as a C3D2013 file...even though it is still opening as a 2010dwg format file? Opening the file in Notepad even shows it was last saved in 2012.
View 6 Replies
View Related
Oct 2, 2013
My goal is to have a message box open as soon as an assembly file is opened so that other users will be warned/ notified of linked parameters. My assumption is that an iLogic rule would be the best way to handle this.
I can create the message box, but when I looked through the iLogic snippets I didn't find any way to trigger the box at opening the file.
Inventor 2013 (SP2 Update 2), Windows 7 Professional (64-bit), SP1, Intel Xeon 3.07GHz CPU, 12GB RAM, NVIDIA Quadro 2000, Vault Basic 2013
View 3 Replies
View Related
Apr 15, 2013
Is there a way to change the saved version when running a titleblock update?
Even though my save preference is set 2010, anything saved during a titleblock update is in 2013.
Noticed this in 2013 & 2014
View 5 Replies
View Related
Aug 8, 2012
We recently upgraded from 2012 to 2013.I set up a task in Task Scheduler to migrate one of our working folders to migrate to the new version.When I open a part or any other file from that migrated folder and save it I get the attached message.
The message states the file has been migrated. Why do I need this messge? Or has the file been migrated?
View 1 Replies
View Related
Jan 24, 2012
When I enter a Run File Name in the "Create Tube & Pipe Run dialog box I get the message "The path is too long. Try a shorter name." The name I entered is "Kappa 55 Suction Line", I also tried the Run File Name of "1" as a test and get the same warning message "The path is too long. Try a shorter name."
View 3 Replies
View Related
May 23, 2013
My .ipt file has a shared sketch that is visible and not adaptive.
But When I attempt to make a second extrusion from the sketch, a message says, "No visible, unadaptive sketches".
I could create another sketch, but I want to learn how Inventor is working because I have had this error before.
The file is attached (I am trying to extrude from the "binder" sketch).
View 3 Replies
View Related
Jan 21, 2013
why few of the drawings processed in Autocad 2004 version and saved in autocad 2000 cannot be opened in different Autocad version such as 2012
View 6 Replies
View Related
Jul 26, 2012
I've started getting this random errror message today when doing random commands, such as switching from model space to my layouts and vice versa, or the undo command, "unrecognized version and cannot be read" and then it gives me the Ok/Cancel option. I hit OK, then says "is not recognized syntax, select OK to ignore or Cancel to abort" And I hit ok, and the command is carried out, but slowly.
I've looked this error up and it seems to have been around since 2000. It looks like it has something to do with print files and scripts, but we haven't added or changed any in years. Although I have been having printer issues. Yesterday this started and it's still happening - when I press the print button, no matter what printer is set to, it would take 2 minutes to see the dialog box, 2 minutes for just a preview, then 2 minutes or more to start printing. It doesn't sound like a long time, but it adds up! And it's still doing that on CAD alone... printing is quick in other programs.
I'm on AutoCAD 2013, Windows 7, 64 bit OS.
View 6 Replies
View Related
Jul 15, 2013
I'm trying to customise my drawing templates to keep them up to date and also include accountability.I seem to be having trouble in including the name of the person who has last saved the model, and the date the model was last saved.
Manually including this information isn't ideal as people will forget, and it makes it harder to trace revisions.I can't see anywhere on the iProperties where the 'Last saved by' feature is available, but I thought maybe the information could be pulled from the username from the application options?
The last saved date should be easy, as there is a modified date in the model's iproperties; however, I cannot pull this information.I have used other cad packages in the past and this was never an issue. With all the customisation of Inventor, I thought this would be relatively straight forward.
View 3 Replies
View Related
Jun 27, 2012
I would like to know if it is possible to change the pathfile of the FEA results when the part file is saved into Vault. For example: the part file will be saved in the folder manufactruing, but I would like the FEA results to be saved into the folder miscellaneous.
View 3 Replies
View Related
Apr 11, 2012
In the attached file there are two custom iProperties that cannot be perminantly updated nor deleted. The iProperties are "size" and "purch_qty". These iProperties were created and set using a custom macro but they are of course accessable via the standard iProperties dialog. I can change the values for these particular iProperties but as soon as I save the file they revert back to their original values. Same goes for trying to delete them. All other iProperties, custom and otherwise, seem to behave normally.
The sketch in this file originated with a 2D DXF file for a vendor supplied aluminum extrusion quite a few years back. The original file has been copied (save-as...) to about 20 different files over the years. The iProperties in question were added years after most of the files were created, Each file is exibiting the same problem. These files are used in a LOT of assemblies. The thought of recreating all these files from scratch and updating the assemblies is not very inviting.
No other IPT files seem to be having this issue.
Inventor 2012 SP-1
Acad 2012 SP-1
Vault 2012 Update 1 Hotfix DL18480860
Windows 7 Pro 64-bit SP-1
Quad core Xeon 2.26GHz 12 GB
Quadro 4000, 7936 Mb, driver 8.17.12.6570 (265.70), Dual Monitors
SpacePilot Pro, driver 3.3.107.0
View 3 Replies
View Related
Oct 20, 2011
OK then update. I select never show this message agian ever (my favorite ) - but guess what a it pops back up. Nothing is wrong with the assembly
View 1 Replies
View Related
Mar 14, 2011
I try to delete one of version of the file on vault server. When i right-click and delete, it delete all version and original file too.
View 9 Replies
View Related
Oct 1, 2012
I use a machine called a shopbot to cut wood projects. Students draw the parts in Inventor, place them into a idw and use the save copy feature to save it as a DXF file. The shopbot uses a progam called partworks v2 and it reads DXF files. This worked great for the past few years until this summer when we installed the 2013 inventor on our computers. I contacted Shopbot and they said other people are having the same problem and the solution for most of them was to save the idw file as an older version. Last year we had AutoDesk 2011 and it worked fine. how I can save a 2013 idw as a 2011 idw?
View 5 Replies
View Related
Jun 3, 2013
I'm having a problem with the files saved from Inventor, regardless of type. I have no problem saving new files or opening files, however, any time I try and save changes to a file, inventor crashes. Also if I try and move a file, windowes explorere gets stuck at "descovering items." Renaming a file crahses explorer.
One of the files is attached.
View 9 Replies
View Related
Aug 27, 2013
I've been using 3D PDF Converter to convert my inventor models which have been saved by way of Export - CAD Format - Parasolid Binary Files. The default version is 25. You would think that this new version would be new and improved. However, it does not work.
View 2 Replies
View Related
May 29, 2012
Every time when I upgrate Inventor to new version, my old assembly drawing will loss the content center file. So I have to replace the old version's content center file from the new version's content center file. How to automatically migrate it?
View 5 Replies
View Related
