Like the subject says. I know there is a place to check or uncheck whether you want Adobe Reader to launch after you have saved a file to .pdf but for the life of me I can't remember where that is located.
Inventor 2012
Windows 7 64 Bit
A client of mine is unable to read correctly the pdf that I send him. The issue is this: I generate my pdf with the DWG to PDF.pc3 in my ACAD 2012 (64bits).
Within our office, the pdf looks correct, but when our client opens it, the mtext notes appear disorganized.
I am attaching two screenshots: text1 is how our pdf looks, text2 is how it looks when our client opens it.
text1.jpgtext2.jpg
The difference in image quality is because I receive a scan of what he prints.
After plot using "DWG to PDF.pc3", Autocad 2012 will open the pdf with Adobe PDF, how can i prevent is to do this?
View 3 Replies View RelatedI have one function which generate the PDF file using COM API.
That function works fine and generated the PDF successfully.
Only problem is after generating the PDF, Adobe Reader is opened to display that DWG file which I have plotted.
so is it possible to plotting to PDF file without opening Adobe Reader?
how to open adobe acrobat reader without having to open photoshop? i keep getting this message when opening pdf files. "adobe acrobat was installed as part of a suite. to enable adobe acrobat, please start another component of this suite(such as photoshop)
View 2 Replies View RelatedAfter a complete computer format, I was able to make cs6 work. Then I started experiencing slowdowns again. What had I installed that was not ok? Well, turns out that restoring my pc to a point right before the installation of Adobe Reader fixed everything. And I have the same problems if I go on a webpage where Flash Player is working.
View 3 Replies View Relatedmy pc did not recognise lightroom as an option and I (stupidly) clicked and have all my pictures labelled as pdf?
View 3 Replies View RelatedWhen i get a page with adoby reader x it just showes a small menu window & will not open the text i would like to read
View 1 Replies View RelatedThis has been installed and working since just after CS6 released, now Photoshop won't launch it gives me this "sign in required" screen the only change to my OSX 10.7.5 system is I ran the recent Adobe updates
i bought CS6 directly from Adobe... i guess i could just click on some suspect mystery SignIn screen..
After years of uploading photos with a memory card reader, Adobe suddenly stopped recognizing ithe reader and I can't upload anything. I bought a new reader and got the same results.
View 2 Replies View RelatedI'm logged in as local administrator to Windows 7 64bit OS and everytime I tried to install CS5.5 Master I kept getting this message, "Administrator privilege are required to install" I can install any program but just not CS5.5.
View 6 Replies View RelatedWhenever i save a file in Photoshop CC or i save as it crashes and gives me the "Adobe Photoshop cc has stopped working" so i can't use Photoshop CC for this reason. I have it sometimes with Illustrator CC as well.
View 18 Replies View RelatedIs there such a software from autodesk that would open iam files and let the user to take measurement only?
View 9 Replies View RelatedI'm linking an excel file to an .ipt file with iLogic code determining if the Material type is a certian value it will find the correct material thickness. These file work great when working on them thru Vault but when I "Save As Template" and create this file where our other template files are located (not Vault) this fuction does not work. I have realized that I had to place the a copy of the excel file in the same file folder as the template ipt, but even this does not fix the issue.
I recieve this error:
Error in rule: Material, in document: Part6
'MWW Materials (Inventor).xlsx' could not be found. Check the spelling of the file name, and verify that the file location is correct.
If you are trying to open the file from your list of most recently used files, make sure that the file has not been renamed, moved, or deleted.
It seems completly countintutive that just saving the file as a template file would cause this not to work when all files that are required are located in the same file folder. Maybe I need a reference to the excel document within the iLogic code.
Everything I read says its version 6.4, but when I attempt to run the 6.4 patch I get the message that it does not apply? Has Adobe prevented PSE7 from opening .NEF files from the D5100 (without conversion) in an effort to force paid upgrades to the current PSE version?
View 4 Replies View RelatedMy model is ~1-2MB and I'm trying to 3D print it. I am trying to export it as a .stl file but no matter how I try doing it (going through the print piece flow or export flow), the file is either 84 bytes or 0KB.
Is this a known issue, or am I doing something worng?
I've tried restarting the program/my environment.
I'm running into issues with some skeleton parts (with the BOMStructure type of "kPhantomBOMStructure"). When these files are manually opened up by themselves and saved, I get an error stating that "<filename> can only be saved in the context of another document which is not currently in memory".
I've seen other people with this problem in the regular Inventor discussion group ("cannot save changes", "save error"), but with no real solution.
What I'd like to be able to do is find out through the APIs which file this needs to be saved with. I'm worried that I wont be able to get this information since Inventor itself won't tell me.
I can save as bitmap (bmp) camera view below
Sub cameraAndSaveAsBitmap(ByVal GelenYol As String)
'Bu kod açık dosya üzerindeki parçayı geni açıya alıyor ve görüntüyü
'c: emp dizini içerisine DosyaAdı.bmp olarak kaydediyor.
[Code]....
But I want to seve as jpg instead of bmp format...
I am wanting to create a .ipt (part) file in Inventor 2012, save it as a .stl file, and open it up in Project Falcon to test it in the wind tunnel.How do you save an .ipt file as a .stl file in Inventor 2012? I hav tried going to "Save as..." and changing the extention to .stl, but not luck there.
View 3 Replies View RelatedI get this every time i try to close an .ipt.
The current operation requires data from docuemt {location on my network{ but it cannot be found.
I am using Inventor 2012 and C#. I would like that, when I close my Form, Inventor and all files that are open will be closed with displaying the message about saving the files .Some of my opened file are stored in Lists.
This code das not work Inventor still asking me about saving the files.
private void Form1_FormClosed(object sender, FormClosedEventArgs e)
{
if (InventorOpen._started)
{
oDrawDoc.Close(false);
foreach (Inventor.AssemblyDocument openAssemDocument in openAssemDocumentsList)
{
openAssemDocument.Activate();
[code]....
When I try to save a 2 D drawing as a DXF file, I get a box saying "problems encountered while saving the document". I am using version 2012. My older version did this operation without a problem.
View 8 Replies View RelatedI took an existing assembly from one specidifc directory and copied it to another location. Then one part by one I use the replace command to swap out the parts to map to the new location because when I went to iproperties it was still pathing to the old location. I change the new parts physical features (i.e. length, diameter).
I get done with it and all references are pointing to the new location.
I exit out of inventor and call up the new assembly and it has mate errors because the parts are all of the old ones from the original location. Why is it not remembering or retaining the new parts and there locations?
Even when I have gotten this screen I have selected "No" to the bottom (2nd) selection which is the original location I do not want.
I am new to Lightroom 4 and are having some problems exporting certain file dimensions. I have taken some pictures for a friend who wants to use them on her website. When importing the photos I converted them to dng. I have exported different file dimensions such as 320x240 and 640x480 without any problems. Now she asks for 950 x 340. I can enter the dimensions and export it, but when I check the dimensions on the exported photos I get e.g. 513x340.
View 4 Replies View RelatedI have only been using Inventor since late winter . I have create a "master" folder with an assembly, drawing, and excel cutlist. This folder also contains sub folders with the sub-assemblies and parts.
In my master assembly I created ILogic rules to change dimensions of the parts, to select different profiles and to select different sub assembly configurations (on/off). It works fine as is.
Now, the idea was to copy the whole "master" folder and rename it to a job, launch the master assembly and configure it, then save it. The issue is that, even though the master assembly is in a new folder, it still references the sub-assemblies and parts from the "master" folder. How do I write a rule to "save as" all these sub-assemblies and parts to the new location?
We modeled parts in inches. We save as copy to an .STL file to get SLA prototypes made. The parts came back 2.54 times bigger than needed. Reason is the default setting for saving as .STL files is Centimeters.... Not sure why Autodesk did this....but yes I understand it's not their fault, we should have checked under options and changed it to inches.....we just assumed that you model in inches, it would save as in inches....See what happens when you assume....
View 5 Replies View Relatedit is possible to save a stressed part from a simulation in Inventor as an .ipt in its displaced condition?
View 1 Replies View RelatedTrying to create a bit of code that when the 'OnNew Document' event is fired the code checks for a particular Custom Property. Depending on what the Custom Property is set to a form is then fired with relevant text to point the user to a specific area in the workspace. Al this works ok.
But if they press cancel i need the code close the activate 'Part1' which inturn then allows the user to select 'New' to begin again.
I have tried various scenarios but the main problem is that Inventor then crashes!
PublicSub applicationEvents_OnNewDocument(DocumentObject As Inventor._Document, BeforeOrAfter As Inventor.EventTimingEnum, Context As Inventor.NameValueMap, ByRef HandlingCode As Inventor.HandlingCodeEnum) Handles applicationEvents.OnNewDocument
[Code]....
I use a machine called a shopbot to cut wood projects. Students draw the parts in Inventor, place them into a idw and use the save copy feature to save it as a DXF file. The shopbot uses a progam called partworks v2 and it reads DXF files. This worked great for the past few years until this summer when we installed the 2013 inventor on our computers. I contacted Shopbot and they said other people are having the same problem and the solution for most of them was to save the idw file as an older version. Last year we had AutoDesk 2011 and it worked fine. how I can save a 2013 idw as a 2011 idw?
View 5 Replies View RelatedI'm having a problem with the files saved from Inventor, regardless of type. I have no problem saving new files or opening files, however, any time I try and save changes to a file, inventor crashes. Also if I try and move a file, windowes explorere gets stuck at "descovering items." Renaming a file crahses explorer.
One of the files is attached.
I have a situation where a teacher in our PLTW(Project Leads The Way) who uses inventor products for sometime is not able to save a old current project or make changes to this project, then save it. What is happening is it gives a blue screen error and corrupts the file so it cannot be fixed or opened. We cannot duplicate the process with the teacher, but we can if the file is opened on another computer and it is opened also on another computer at the same time as other pc. However, the teacher states that he doesn't have it open on any other PCs in the school.
View 2 Replies View Related