I have one function which generate the PDF file using COM API.
That function works fine and generated the PDF successfully.
Only problem is after generating the PDF, Adobe Reader is opened to display that DWG file which I have plotted.
so is it possible to plotting to PDF file without opening Adobe Reader?
After plot using "DWG to PDF.pc3", Autocad 2012 will open the pdf with Adobe PDF, how can i prevent is to do this?
View 3 Replies View RelatedI am working on a lisp to scale drawings of various sizes to a predetermined size. After the lisp has run and scaled the drawing, the prompts for base point and reference point run a second time. How can I get this to run through once? I think it has something to do with the way the reference length is being entered. The base point and first reference point are the lower left corner of the drawing, while the second reference point is the lower right corner.
(COMMAND "SCALE" "ALL" "" (SETQ A (GETPOINT "
SELECT BASE POINT :")) "R" A
(GETPOINT "
SELECT REFERENCE POINT : "))
"1'-5"")
I have a custom linetype that's just a series of arrows I want to use to show the flow of a ditch. I've played around with this thing for a while and have these dots at each end of the line that shows up when I print.
Is there any way to make this linetype without the dots at each end? the actual files for the line type.
FLOW.lin
*FLOW,A,0,-.002,.148519,[FLOW,FLOW.shx,s=1],-.449481
Any lisp file that can plot all of the layout tabs? I am looking for one that will plot to a plt file and also pdf?
View 5 Replies View RelatedI cannot get my lisp routine to run when I batch plot in AutoCAD 2014. It's loaded into the startup suite and runs when I open the individual drawings but not during a batch plot. How can I get this to run during a batch plot?
View 9 Replies View RelatedI recently upgraded to a new PC.
We get a lot of files from customers where there are multiple drawing borders all in model space.
Sometimes as many as 150-200 borders in one file that we need to print for the shop floor.
Years ago, I wrote a LISP routine that prompts for printer settings (Fit or To scale, etc.) and then prompts for
2 corners of each border and then writes a script file and launches it to batch plot each drawing.
My thinking was that I had to manually pick each drawing anyway, this LISP routine saved me from having to issue the plot command over and over.
Anyway, since my PC upgrade, the LISP routine fails.
There is a line of code that answers the plot prompt for output device name where I have the same printer as always.
When the script runs up to that line, AutoCAD tells me that printer is "not found".
So then it keeps reading the rest of the script lines which answer other plot prompts and repeatedly says "device not found".
If I manually print, I can choose the same print settings in the dialog box that the script file has and it can "find" that same device.
Why I can print manually but the LISP/script file gives me a "not found" error.
BTW, when I upgraded my PC, I also upgraded AutoCAD from 2012 to 2013..
Is there any way for me to choose a bunch of .dsd files, and have those be batch plotted?At the moment I have to publish one .dsd file at a time, and each .dsd file can take about 10 minutes to go through all the layouts I have.
Does Autocad have that capability built in? Or is this a problem that can be solved with scripts?
the names of the function to establish the plotting parameters using the (vlax-get-property <name> <parameter> ) method. For example the plotting device name is obtainable by (vlax-get-property <objectname> 'Configname).
What "words"/parameters do I use to find the plot orientation and paper size?
lisp..It work fine but just that i need some minor modificatio to it...At moment, when i activate the lisp, it will automatic select all dimension,leader and multileader to a layer call "DIMENSION"...Anyway i wonder if it is possible to prevent any dimension,leader or multileader in layer "Section" will not be change to layer "Dimension"?
View 2 Replies View Relatedhow to open adobe acrobat reader without having to open photoshop? i keep getting this message when opening pdf files. "adobe acrobat was installed as part of a suite. to enable adobe acrobat, please start another component of this suite(such as photoshop)
View 2 Replies View RelatedI have this code w/ which I can open up Block Library Blocks for editing. We have R2012 installed w/out VBA.Our MIS department is impossible to deal with. We have this new fangled permission hysteria so I cannot install VBA myself.Is there any other way to open up my blocks? What I can I do instead?
(defun CpL () (prompt "...Open Library Block or Xref...")(terpri)
(setq a (entsel)) (setq b (car a )) (setq c (entget b)) (setq d (assoc 2 c))
(setq e (cdr d)) (setq ff (strcat e ".dwg")) (setq PP (findfile FF))
(setq opath (strcat "acadapplication.documents.open ""PP"""))
(command "vbastmt" opath))
I need to use visual lisp to set the workbook if it is already open. What is the syntax for this?
I got the ExcelApp already set as well as the FilePath.
If the workbook is not open then this works
(setq WorkBook (vl-catch-all-apply 'vla-open (list (vlax-get-property ExcelApp "WorkBooks") FilePath)))
I want to be able to see if the workbook is already open and if so set it otherwise open it.
How can you open a drawing read-only with autolisp.
View 9 Replies View Relatedcan you start autocad with no drawing open ?
i would think that some type of script would work or could you change your target on a shortcut?
Is it possible to open a dwg, change something and then plot a layout with visual lisp. This is my start. Opening is working, but plotting not. I have to switch between drawings before the function is going on. Sometimes it's plotting an empty sheet and otherwise an error: ERROR: Automation Error. Description was not provided.
(defun plotbatch ()(vl-load-com)(setvar "sdi" 0);; open file(setq acadobject (vlax-get-acad-object))(setq documents (vla-get-documents acadobject))(setq open (vla-open documents "U:\testfile.dwg" :vlax-false));; changing something;; plot layout(setq plot (vla-get-plot open))(vla-put-NumberOfCopies plot 1)(setq layouts (vla-get-layouts open))(vlax-for each layouts (if (= (setq name (vla-get-name each)) "TestLayout") (progn (setq salayout (vlax-make-safearray vlax-vbString (cons 0 0))) (vlax-safearray-put-element salayout 0 name) (vla-setlayoutstoplot plot salayout) (setq errmsg (vl-catch-all-apply 'vla-PlotToDevice (list plot "\\RW-PRN01\RICOH"))) (if (vl-catch-all-error-p errmsg) (prompt (strcat "ERROR: " (vl-catch-all-error-message errmsg))) ) ) ));; close file(vla-close open :vlax-false)(princ))
like in AutoCAD there is REMEMBERFOLDERS can u tell me if i use syntax with getfiled and i want the path to be remember next time what should i do or what syntax i use for that.
View 1 Replies View RelatedI'm trying create a LISP to customize PDF creation. The lisp looks into the .PC3 file which paper size better fits the plot area. But its exaustive to every time i want to create a new paper size i have to open the .pc3 file and configure a new paper.
There is a way to open the .pc3 properties through lisp?
Is there a way Autocad could just do what I asked for, and nothing more?A few examples
- After publishing, the publish dialog auto closes. I don't wat that. After publishing dwf I also want pdf.(I know you can save the list, that's not the point. If you didn't close the dialog I wouldn't need it)
- When selecting a hatch, the ribbon automatically jumps to Hatch Editor. I don't want that. Maybe I just want to change the layer. I can find the Hatch editor my self..Dito for XREFS
- I do not want any dialog giving me warnings, about anything.
If an XREF doesn't get attached, I can see that. I don't need a dialog telling me.If a shape file is missing, I can see that..A triangle sign above the command line is totaly adequate.Don't auto open or close dialogs, for what ever reason.
So ... don't auto do anything I can perfectly do manualy. No doubt there are a few more examples I can't think of right now.The nice thing would be to get a variable that gives me that "no auto" mode.
I have a small number of drawings that I use very often. I would like to make a menu item to open a certain drawing but I keep getting stuck when the drawing name should be entered automatically.I use the code
^C^Cfiledia;0;open;"test.dwg";filedia;1;
The drawing is my support file search path and the name is unique. How do I get this to work properly?When running this command:
Command: filedia
Enter new value for FILEDIA <1>: 0
Command: open
Enter name of drawing to open <C:previous.dwg>:
*cancel*
Command: "test.dwg"
Unknown command ""TEST.DWG"". Press F1 for help.
Command: filedia
Enter new value for FILEDIA <0>: 1
It asks what file to open and suggests the last opened file, and whatever I tried so far this keeps happening.
*.scr files are not allowed on our network, I can't create or rename files to *.scr. Of course I could ask the admins to allow this but I think our security policy is more important than me having a button to open a file.
We have stored lisp in fileserver which 30 users can access it. Now a day some users have getting the ‘failed to open project’ error after load the Lisp due to this they r also not getting most of the commands. The full rights have been given to appropriate folder which contains (Autolisp application source file, .vlx, Autocad VBA source). It has working for limited users (8-10 users).
Server OS: Windows server 2008
Note: Previously we had used windows server 2003.
I want to put the list of open drawings (like the window tab on the menubar has) onto the ribbon? Is this possible?
View 2 Replies View RelatedHow to create lisp which i can simply type in to the command bar so that the current drawing's filepath-folder will be automatically opened by windows explorer?
running AutoCAD 2012 / Windows 7...
I am looking for a way to force all DWG files created with previous versions of AutoCAD to automatically open "Read Only". For example, using Civil 3D 2011, I open a file that is a 2007 format DWG. I want this file to automatically open read only, and inform the user that it has opened read only.
I'm hoping that this is possible, since opening a 2007 format DWG in a newer AutoCAD already tells you that it's an older format in the command line, and files can already be opened as read only.
How can I extract all layers in an open drawing to a notepad or txt file?
View 7 Replies View RelatedI'm trying to create a macro for a toolbar button to open a third party program. Basically we want to open a custom .exe application from a button on the ACAD toolbar.
View 5 Replies View Relatedhow to make a routine for zoom extents, save all, and close all open drawings in a single routine?
View 3 Replies View RelatedI'm trying to open a file to write to on my external drive, I get this message "bad argument type: stringp nil".
View 8 Replies View RelatedIs this something that is possible? Basically I have an excel file with sample data that comes coded (red background for fail, Green for pass) Then we transfer that into halos on a DWG. got a routine to count the halos in a DWG. Now I was thinking it would be nice if it compared the number to the excel file to make sure no mistakes were made when placing the halos.
So as I mentioned I've seen rountines to read data in cells but none to count cells based on colour.
I have used Autocad since 1991, and my current job required me to use Microstation. One feature I liked from Microstaiton is the ability to select and open an external DGN reference, and then match the view of the parent DGN. In AutoCAD, you can also select and open an xref, but the DWG opens to the previous saved view, and not to the desired view that matches the layout.
My thought was to experienting with lisp or scipt and export the "Viewctr", "Viewtwist" and "Viewsize" variables to a text file, then importing the text file and using the "Viewtwist" as my "SNAPANG" value, then "Viewctr" as my "ZOOM, CENTER" value, and finally the "Viewsize" as the "Enter magnification or height:" value.
But, alas, have no time, and not quite the knowledge to duplicate MicroStation's open-xref-and-zoom-to-view feature.
Id like to append a file with the following text...
(load "C:/ICT/GEBERIT/LSP/GEBERIT.LSP")
Quotation marks and all but how do i Handel them and the open and closed brackets using the following lisp example
(setq f(open "C:/ICT/AutoCAD_Architecture_suite_2012/LSP/acaddoc.lsp" "A"))(write-line "(load "C:/ICT/GEBERIT/LSP/GEBERIT.LSP")" f)(close f)