I have a custom linetype that's just a series of arrows I want to use to show the flow of a ditch. I've played around with this thing for a while and have these dots at each end of the line that shows up when I print.
Is there any way to make this linetype without the dots at each end? the actual files for the line type.
FLOW.lin
*FLOW,A,0,-.002,.148519,[FLOW,FLOW.shx,s=1],-.449481
I have a client who requested some complex custom linetypes. (line - shape - line)
I built the shapes and stored them in my ltype.shp file, and compiled that to ltype.shx. Then I added the custom linetypes in my acad.lin file. So everything works on my machine with no problem. However, when I send the drawing to someone else, the linetype works, but the shapes are left out. My guess is that since her ltype.shx file does not contain my new shapes, the lines are just drawn without them.
Is there a way that I can have those linetypes, complete with shapes, ride along inside/embedded the dwg file?
And before you ask, no, it's not an option to provide the client with the shx file that contains these shapes. I'm one of many different people in many different companies that might work on these drawings in the future and there's just no way that they'll be able to send an shx file along with the drawing every time someone new needs to work on it.
I am working on a lisp to scale drawings of various sizes to a predetermined size. After the lisp has run and scaled the drawing, the prompts for base point and reference point run a second time. How can I get this to run through once? I think it has something to do with the way the reference length is being entered. The base point and first reference point are the lower left corner of the drawing, while the second reference point is the lower right corner.
(COMMAND "SCALE" "ALL" "" (SETQ A (GETPOINT "
SELECT BASE POINT :")) "R" A
(GETPOINT "
SELECT REFERENCE POINT : "))
"1'-5"")
In our Structural department, we use a layer called S-35-WALL-LB to denote a load-bearing wall, and what the guys typically do when they are on the sheet showing the floor above, is dbl-clk the VP to activate model space, open the Layer Manager and change the VP linetype to HIDDEN to show the afore-mentioned loadbearing walls as walls under.
way to accomplish this through a viewport...but instead of using the Layer Manager, use a lisp routine I can link to a toolbar button where all the user has to do is dbl-clk the VP, press the toolbar button, and either it will convert the default VP linetype (continuous) for S-35-WALL-LB automatically, or get the user to select an object on that layer and it changes the whole lot?
I have some drawing that contains PHANTOM2 linetype.
I can't delete this linetype from my drawings!
I draw a linetype in my file with text in it (HW), I need to flip the text (Not the line itself) ...how is this done?
View 9 Replies View RelatedI've got a linetype that's part of our autocad template file and has been for so long that nobody around here even knows where the original line file is.
I need to extract the linetype out so that I can make some minor modifications. I did do a search and found a nifty lsp routine from Paul Turvill. (Here's the thread that pointed me there: [URL] ..........
I ran it and it SEEMED to work. All the linetypes in the file it created look good EXCEPT for the one I needed to extract. That one looks like this in the line file:
*TREELINE,Series of arcs used to indicate tree drip lines
A,0.0001,-0.0001,
The linetype DOES display properly in the dwg file (meaning lines drawn using it look good).
I have one function which generate the PDF file using COM API.
That function works fine and generated the PDF successfully.
Only problem is after generating the PDF, Adobe Reader is opened to display that DWG file which I have plotted.
so is it possible to plotting to PDF file without opening Adobe Reader?
How can I get the color that a layer has assumed in an specific viewport, and the same for an specific Linetype when it changed with an VPLAYER command
I found a function LM:GetOverrideData ( layer / data ) ;; © Lee Mac 2010
but return me the same data if I hask about an specific layer in all vports, and in one of them the layer color is modified.
I need to do three things in a LISP routine for around 200 drawings. First, I need rename lots of old layer to new standard layer name, like change layer name "CL-RAILWAY-0" to new layer name "CL-0".
Secondly, I need translate some layer to standard layer, like all the things on layer "CL-WATER-160" to layer "CL-0"
Last, change some linetype, like change linetype"CENTER" to "CENTERLINE". I can do all those things by "CHECKSTANDARD" manually, but I really need someway faster and easier.
how to write a lisp that when i activate it, it will change all the objects in the drawings to be change to "Layer 0" and all linetypes "Dashed" change to be "hidden"...
View 9 Replies View RelatedI would like converting all objects that has forced linetype to be on a linetype layer.
So if there are objects that have forced linetypes - dashed/hidden/phantom, etc., those entities would be moved to a linetype layer based on their forced linetype. The entities would all be changed to color bylayer, linetype bylayer.
So if there is a rectangle that is sitting on an EQUIPMENT layer, the routine would put that rectangle on a new layer called DASHED and change its forced linetype to BYLAYER.
Lastly, once that's done, the next and final step is to locate a the existing layers with matching linetype - say, OBJECTS with DASHED as a linetype, and merging it to that layer.
Linetype code that represents blocks in a retaining wall, lets say for instance Keystone type blocks?
View 1 Replies View RelatedI want to know how to create linetype with double lines one rectangle empty and other with solid in autocad(i am using autocad 2004)I tried by express tools with command mkshape (and then makelinetype command) but it is coming without solid, is it possible in autocad by using Autolisp, see attached dwg, name is linetype_ds
View 2 Replies View RelatedIs there any way with a click of a button by using LISP, it will change all the selected object to be changed to a pre-set layer...
Example, after i select a certain entities in a drawing, with LISP, it will change all the object to layer "0"?
Additionally, u also need it to change all selected entities that are in "dashed" linetype to be change to "hidden" linetype..
I have a Lisp that I have been working on with some folks in the office, and i feel like i am close, but i am not getting the cigar. The idea would be to have the lisp allow the user to select a nested x-ref entity, and change the color and linetype of the selected layer, similar to the old "LAP" command (I know it is a dinosaur, but I still miss it). I seem to be doing swimmingly, code I have quasi-plagiarized. It seems to crap out where i try to pass the selected linetype back to the layer. I get the nastygram "Command: ; error: no function definition: GETLINETYPE" right after selecting the linetype from the dialog.
Code below...
x(defun c:CX (/ Sel EntList DataList cnt Num ClrNum EntData)
(if (setq Sel (nentsel "
Select object to change layers color and linetype: "))
(progn
[Code]...
HP Elitebook Workstation
Windows 7
I have too many blocks with specific layers inside.
develope lisp can change all to layer 0 but keep color and linetype as it is.
I will use this as a part of script to change multiple block.
lisp..It work fine but just that i need some minor modificatio to it...At moment, when i activate the lisp, it will automatic select all dimension,leader and multileader to a layer call "DIMENSION"...Anyway i wonder if it is possible to prevent any dimension,leader or multileader in layer "Section" will not be change to layer "Dimension"?
View 2 Replies View RelatedI was on an older cad and am now moving to 2014.. my previous cad was heavily customized the old school way, I have decided to learn the CUI (and dynamic blocks)
My old cad has blocks on a drop down menu.. click BATH menu than WC icon, a macro sets the correct layer than inserts the WC.. took time to setup but pretty simple and straight forward (see attached for menu syntax). I also made a toolbar BATH and on that toolbar I made a WC icon.. that’s what I use the most
couple of questions
1) do I have to make a new command in CUI for each block to do the same thing?
2) I looked into the design center, but seems like its too many steps but it seems a toolbar with an icon on it, clicking the icon and a macro sets layer and insert block is still pretty quick..??
3) if a toolbar with an icon is still a fast and less step method, can I open the block and somehow make an icon of it? if so where do I put it?
I want my application to include a useful Ribbon interface that displays custom properties, read from my custom objects.
I have found the existing Ribbon Control Elements, but I want to use custom controls, not the pre-canned controls.
Is there a generic programmable input box for the AutoCAD Ribbon?
I want to make a keyboard shortcut that will turn on/off my osnap, polar, and otrack.I would be fine with setting F3 to do this, or any other key really.I like to be able to turn these off on the fly, but it is getting old having to press all three.
View 7 Replies View RelatedI've successfully written a lisp routine to insert a scale bar dynamic block with attributes, gather the object id of a user selected viewport, and write fields to attributes for each of the numbers across the top of the typical scale bar as well as the scale name, for both architectural and civil units. I'm trying to come up with a similar dynamic blocklisp routine combination to do the same with view titles, and the associated scale callout. The catch in this case is that I'd like to display the scale as "NTS" if it isn't a proper scale. The "standardscale" object property option in the field dialog box gives me almost exactly what I want, except that non-standard scales are displayed as "CUSTOM" as opposed to "NTS". Moreover, I’d like this to update on the fly, if the viewport scale changes, the scale callout needs to change also, back and forth from “NTS” to a standard scale if need be.
is there a way to change that (CUSTOM NTS)? My research online seems to indicate that the nuts and bolts of fields are deeply rooted in ObjectARX, which is something I know very little about?
The natural followup to that question is, if I can't change "CUSTOM" to read "NTS", is there a way to wrangle this whole thing with reactors? I'm envisioning object reactors, created as a part of the insertion routine, for each individual instance of the block (there could very well be several in a layout, and multiple layouts in detail drawings), that would call another routine to evaluate the viewport scale, and if it didn’t match a list of standard scales, write NTS to the attribute. My issue is that reactors seem to only associate with one object, in this case that’d be the viewport, the reaction would cause the reactor to call the routine, but how does the routine know which block to update? Is there something from the viewport properties that I can add to the block name (or some other property) which will allow the routine to figure out which block to edit?
I’ve attached my scale bar code, and block, as reference context for how I plan to set the view title up.
I use DwgProps > Custom tag to log revisions to our company templates.Then when trouble shooting CAD issues I can look at what template rev level the drawing was started from.
Is there anyway that DwgProps can be removed from the drawing?
I am not looking for a solution to do this... I just wondered if there could be someway a particular drawing file might have somehow lost the DwgProps > Custom entries.
I'm trying to get familiar with AutoCAD. Google and didn't manage to solve a problem :
In AutoCAD LT 2013, I created a custom command called Special fillet :
Name : Special filletDescription : Round a polylineCommand display name : SFILLETMacro : ^C^C_fillet;p;r;0.1
I created two aliases at the end of acadlt.pgp :
SF, *SFILLET
C, *COPY
When i type C, it works fine (just a test) but although it appears correctly in the Command prompt, SF doesn't work and it keeps telling me : UNKNOWN COMMAND "SF"
Last thing, if I create an icon in a toolbar with the special fillet command : it works fine...
Is there any way i can create my own custom balloon notification to alert the detail of any new or updated menu items?
View 2 Replies View RelatedI have tried everything even un-installing and re-installing. I have customized programs that have been working properly for months by many individuals. These include custom menus, toolbars and ribbon tabs. One day last week one of the ribbon tabs disappeared. The crazy thing is if I load the .cuix file as an Enterprise cui, everything is visible and works just fine. BUT, when I load it as a partial cuix file the ribbon tab does not show up. The custom menus come in, my custom toolbars work and show up just fine but the dag blasted ribbon tab won't show up.
Yes, it's marked as visible. I've done and redone the cui editor, customized my workspace again and again checking every piece of information. I need to have it loaded as a partial cui file as I am the author of these tools that hundreds of people in my company depend on.
How to add buttons and create my own ribbon in AutoCAD, but now I would like to be able to have buttons for two different schedules that I have created. While I can have a button start the schedule command it won't automatically pick the schedule that I want it to create.
View 1 Replies View RelatedI would like to build a custom button that mimics the FDO - Save as AutoCAD drawing functionality. Clicking this button brings up a wizard with too many clicks for how often the users will do it.
They will not want to load a script so a custom button is required. Also, I need to be able to dynamically set the new saved file name based on the source DWG file name.
I'm trying to write a simple Custom Command that sets any layer that matches "$-*" to a specific color. But as soon as AutoCAD sees the $, it thinks I'm trying to do a DIESEL expression. Supposedly, the quote marks specify that the enclosed characters should be treated as plain text, but that doesn't happen.Here's what I've got:
^C^C-LAYER;C;252;"$-*";;
And this is what I get:
Command: -LAYERCurrent layer: "$-HATCH-00-002-PW-BOAT"Enter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile]: CNew color [Truecolor/COlorbook] : 252Enter name list of layer(s) for color 252 <$-HATCH-00-002-PW-BOAT>: "No matching layer names found.Enter an option [?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/MATerial/Plot/Freeze/Thaw/LOck/Unlock/stAte/Description/rEconcile]:
It stops, hanging at the incompleted -LAYER command prompt.
I have a problem that I cannot seem to solve. I have a drawings with a whole bunch of layout tabs that have a few viewports in each tab. One of these viewports on each layout tab is on the layer VIEWPORT. I did this so it would be easy to filter out the other viewports in the drawings. I am using the code below to change all of the viewports with the layer VIEWPORT to the Custom Scale 0.020833. This works for all of the layout tabs except the first tab. It will not for some odd reason work on the fist tab.
(setq vieportfilter (list (cons 0 "VIEWPORT")))
(setq ssetvp (ssget "x" vieportfilter))
(setq cntrp 0)
(while (< cntrp (sslength ssetvp))
[code]..........
how to access custom drawing properties using LISP. It was in a discussion initiated on 01-06-2011, subject: Custom drawing properties.
One solution was to use the following method:
(setq si (vla-Get-SummaryInfo (vla-Get-ActiveDocument (vlax-Get-Acad-Object))))
(vla-GetCustomByKey si "DWGPROP1" 'pval)
(princ pval)
Now taking it a step further, using LISP, how can I "update" my custom drawing properties?
Inventor RS 2011
AutoCAD Mechanical 2011
ASD 2013
Vault Collaboration 2011
Windows 7 Pro
