AutoCAD Visual LISP / AutoLISP :: Extract All Layers In An Open Drawing To A Notepad Or Txt File?
Mar 5, 2012How can I extract all layers in an open drawing to a notepad or txt file?
View 7 RepliesHow can I extract all layers in an open drawing to a notepad or txt file?
View 7 RepliesI have some coordinate in the excel file. How to import from excel to dwg. All coordinate i will make polyline. I know one method all coordinate copy and paste to command prompt. But i need script file or other method.
View 3 Replies View RelatedI have few co-ordinates in notepad like mentioned below. How can i create polyline using read-line function in auto lisp.
x y
0.0,0.0
2.0,0.0
2.0,1.0
0.0,1.0
2.0,0.0
4.0,0.0
4.0,1.0
2.0,1.0
I am trying to write a lisp file that extracts the LAYER, Z, X, Y, TEXT HEIGHT, POINT NUMBER, from the attached DXF file. Ultimately I will have the lisp insert a "POINT" at the X,Y,Z, cords, and then a "TEXT" entity at the same coordinates with the text height value and the point number string. Both entities need to be on the layer ending in "-PN". The layer name will change depending on the date. I have a third party program that creates the DXF file.
The point of the lisp file is to insert the point numbers and points into my drawing at their correct locations. For the life of me I can not make this work. I have attached the little bit of lisp I have, which unfortunately does not work properly because of it searching for the "TEXT" entry in the DXF file of which there are three per point number. I only need one. I have also attached the DXF file I have. maybe just an overall procedure that I can then code myself? I'm just not good at getting lisp to read a file and extract what I want from it.
I've got a linetype that's part of our autocad template file and has been for so long that nobody around here even knows where the original line file is.
I need to extract the linetype out so that I can make some minor modifications. I did do a search and found a nifty lsp routine from Paul Turvill. (Here's the thread that pointed me there: [URL] ..........
I ran it and it SEEMED to work. All the linetypes in the file it created look good EXCEPT for the one I needed to extract. That one looks like this in the line file:
*TREELINE,Series of arcs used to indicate tree drip lines
A,0.0001,-0.0001,
The linetype DOES display properly in the dwg file (meaning lines drawn using it look good).
I have some numeric data like 1, 2, 3, 4, 5 in mtext format in autocad drawing file and some numeric data like 1,2, 3 in notepad.
How can i get the remaining numeric data of autocad dwg into another notepad using autolisp or visual lisp
How can you open a drawing read-only with autolisp.
View 9 Replies View Relatedcan you start autocad with no drawing open ?
i would think that some type of script would work or could you change your target on a shortcut?
Is there a way to apply a single string value "Phase1", or "Phase2" to all layers in a drawing? I though about exporting a Layer State, modifying it in Excel, then re-importing the layer state, but, Layer States don't store a value for "Description."
I'm creating a consolidated map from several drawings, but I'd like to be able to separate the layers from each drawing. Description seems like a good value to populate and be able to sort by in the Layer Manager.
I have a small number of drawings that I use very often. I would like to make a menu item to open a certain drawing but I keep getting stuck when the drawing name should be entered automatically.I use the code
^C^Cfiledia;0;open;"test.dwg";filedia;1;
The drawing is my support file search path and the name is unique. How do I get this to work properly?When running this command:
Command: filedia
Enter new value for FILEDIA <1>: 0
Command: open
Enter name of drawing to open <C:previous.dwg>:
*cancel*
Command: "test.dwg"
Unknown command ""TEST.DWG"". Press F1 for help.
Command: filedia
Enter new value for FILEDIA <0>: 1
It asks what file to open and suggests the last opened file, and whatever I tried so far this keeps happening.
*.scr files are not allowed on our network, I can't create or rename files to *.scr. Of course I could ask the admins to allow this but I think our security policy is more important than me having a button to open a file.
Lisp file to plot all layers on,
I’m not sure if there is a lisp file that cans Plot All Layers ON at a time instead of going to the long story of the layer properties manager.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
How to create lisp which i can simply type in to the command bar so that the current drawing's filepath-folder will be automatically opened by windows explorer?
running AutoCAD 2012 / Windows 7...
Is there a way to search the database/tables/whatever to determine if new layers are present in a drawing?
I want to run a script to reconcile new layers in the sheet drawings after having cleaned the xref drawings, and the script bombs if there are no new layers present in the parent drawing.
If I could determine what triggers the layereval/layernotify sequence (tblsearch?) I could include an if or while lisp routine that would invoke the layer command and then reconcile the new layers.
Is there a way to import layers from a text file?
View 9 Replies View RelatedI am trying to make a script file to open a drawing and run a lisp routine. They both work independently just fine, the script file will open the all of the files fine... and the lisp is in the startup suite and works in all the files. But when I tell the script file to open the first drawing then run the lisp it hangs trying to open the next file after running the lisp. I have Filedia set to 0, but the message I get when it goes to open the next is "No canvas exists. click New Canvas." (And on top of that... Filedia even set back to 1 still does not display the Dialog box anymore, I have to shut down AutoCAD 2012 and start again then it works.) I Have tried several ways, Opening one at a time then run lisp, and open all files first and then try to run lisp (that closes the file after running) and try and run it again in the next... It will only run the lisp one time and then locks up from there.
View 7 Replies View RelatedLisp file to thaw all layers frozen in the viewport,I’m wondering if there is a lisp file that can thaw all layers frozen in the viewport.
View 4 Replies View Relatedlike in AutoCAD there is REMEMBERFOLDERS can u tell me if i use syntax with getfiled and i want the path to be remember next time what should i do or what syntax i use for that.
View 1 Replies View RelatedCreate a script or a lisp file to match a tif to a drawing file in autocad 2011?
View 9 Replies View RelatedI need a lisp routine that will allow me to pick a polyline and label with azimuth and distance (direction-north, clockwise) of a new WCS.
Is there any code that extract information for a new WCS?
I have a drawing that has an aerial Images inserted into it using a WMS Connection How to extract Image Name through Autolisp from this
View 5 Replies View RelatedI am trying to make a script for inserting a standard title block in some drawings. ( which needs to be often done for different projects). The title block is kept in the network path. How can i specify the path in the script file in order to insert the block.
-Insert,> Block name > (I need to specify the drawing in the network to get the block in it)
I would like a lisp routine that can extract and export the x, y, z coordinates of all the points in a drawing into a text file so I can use the same in excel.
View 9 Replies View RelatedI’m looking to extract the second from the last directory within the dwgprefix of
"P:Projects66 Structural666-4800-00 TPA666-4815-00 Res4815 Res Figures" (i.e. 666-4815-00 Res)
This is what I have so far:
(defun c:tmp ( )
(setq P1 (getpoint "
Pick point: "))
(command "text" P1 "" ""
(strcat
(vl-filename-base
(vl-string-subst "." "\" (getvar 'dwgprefix) (vl-string-position (ascii "\") (getvar 'dwgprefix) nil T))
))))
A quick lisp routine to extract the elevations of a selection set of 2d polylines? I have a massive "contour" file composed of 2d polylines with elevations. I need to find the min and max polyline elevation in selected areas. I can't figure out how to extract just the elevations of my selected polylines so I can quickly see the elevation values?
View 9 Replies View RelatedI am looking for a Lisp routine that will convert all Mleaders within a drawing file to Qleaders.
AutoCAD 2013
Reason: The Mleaders are causing issues with the viewing software that we have to use with our drawing management program.
how to extract value X Y Z of point p3 p4
(defun c:test ()
(vl-load-com)
(setq actdoc (vla-get-ActiveDocument (vlax-get-acad-object)))
(setq objm (vla-get-ModelSpace actdoc))
(setq obju (vla-get-Utility actdoc))
(setq oldhigh (getvar "Highlight") oldsnap (getvar "Osmode") oldblip (getvar "BlipMode") oldecho (getvar "Cmdecho") );setq
(setvar "Highlight" 0) (setvar "Osmode" 517) (setvar "Cmdecho" 0) (setvar "Blipmode" 0)
[code]....
I have a inserted block with 4 tags for Length, Thickness, Elevation and Width.How can extract attributes tag values and draw a closed polyline + 2 internal lines, parallel to the block?
Block Name: ID_DATA
Tags: LEN, THI, ELE and WID.
Each internal line placed in a third width.
I'm dimensioning an old drawing with the real (measured) dimensions and with the drawing dimensions in brackets (using ' 1500 (<>)' to give '1500 (1505)' for example.
What I'd like is to also be able to put on the difference between the length I type in and the length in brackets - as this would let me see any really glaring errors that can't be attributed to user-error on the laser measure.So I could type in '1500 (<>) (X)' where X is the formula, and get ' 1500 (1505) (5)' back?
How to be able to run a script that could highlight any dimensions where the number is brackets and the typed number have a a difference of, say, 50.Or failing that, any way to extract all the dimension text at the end into excel so I can see the differences myself?
I'm trying to open a file to write to on my external drive, I get this message "bad argument type: stringp nil".
View 8 Replies View Relatedhow to sensibly extract angular dimensions as attributes.
I can extract the attributes from a block containing angular dimensions, the attributes list angular dimensions as a field but don't actually list the number of degrees for the angular dimension.
It is the number of degrees that I am actually trying to obtain - but I cannot work out how to obtain the information
Is that possible to have a lisp to extract the Field Expression of a attribute in a block?Specifically, to extract the property VALUE (TextString) of this attribute.After to extract, I would like to put this text extracted in a different layout tab, in the same drawing. In this way, I will have a text linked to the attribute value between two layout tabs. So, when I have to change the attribute value, the text will be updated automatically.
I know that if I use the FIELD command to manually copy and paste this value it will work, but when I have a lot of attributes it becomes very laborious.