I am trying to make a script for inserting a standard title block in some drawings. ( which needs to be often done for different projects). The title block is kept in the network path. How can i specify the path in the script file in order to insert the block.
-Insert,> Block name > (I need to specify the drawing in the network to get the block in it)
Could a .lsp file work with the block editor so that double-clicking a block will make it skip straight to the editor without displaying the "Edit Block Reference" dialoge?
View 1 Replies View RelatedI am trying to insert one or another block into a drawing, and i need to do this 8 times per drawing.
(defun C:detector (/ filename gas pressure)
(repeat 8 (initget 1 "Gas Pressure")
(setq filename (getkword "
Enter Detector Type [Gas/Pressure]: "))
(if (= filename "gas") (command "-insert" "*T:\acad\schematic_circuits\suny\sunygasdetectornew.dwg" pause "" "")
(or (if (= filename "pressure")
(command "-insert" "*T:\acad\schematic_circuits\suny\sunypressuretransmitternew.dwg" pause "" ""))
) ;;end or
) ;;end if
) ;;end repeat
)
Create a routine that looks for a block based on a portion of that block name, using a specified path or search path.
For example, block to search for is BLOCKABC123, so if someone inputs ABC or 123 as a block name, it will locate that block within that folder and inserts it into the drawing at a user specified location.
Ideally, if there is a check in that if it finds more than one match, then perhaps it flags or prompts you to choose 1, 2, or 3 option which block to use. But I can live without this special function if it requires too much time to code.
I had been trying to insert a title block (block) in to a drawing as part of changing the title block But in some drawings the block gets scaled off. Is there any system variable or any solution to maintain the drawing without getting scaled while inserting block.
I had used -dwg units and this appears to single drawings only. Any other way to do this to all the files in a folder.
i have a for example a block with one attribute and would like add a new attribute. i´m trying to read the current block and redefine - it comes a new attribute in propertieswindow but not graphical.
(defun c:ent () (setq bn (getstring "
give a block name ")) (setq bez (getstring "
give a attribut name ")) (entmake (list (cons 0 "BLOCK")(list 10 0 0 0)(cons 2 bn)(cons 70 2))) (setq fe (entmakex (list (cons 0 "CIRCLE") (cons 8 "0") (cons 10 '(0 0 0)) (cons 40 1)))) (entmake (list (cons 0 "ATTDEF") (cons 8 "0") (cons 10 '(0 0 0)) (cons 11 '(0 0 0)) (cons 40 1) (cons 1 bez) (cons 3 "TOP") (cons 2 "NAME") (cons 70 0) (cons 73 0) (cons 50 0) (cons 41 1) (cons 51 0) (cons 7 "STANDARD") (cons 71 0) (cons 72 0) (cons 210 (list 0 0 1)) (cons 74 0) (cons 62 256) (cons 39 0) (cons 6 "BYLAYER"))) (entmake (list (cons 0 "ENDBLK")(cons 8 "0"))) (entdel fe) (entmake (list (cons 0 "INSERT")(cons 2 bn)(cons 10 '(0 0 0))(cons 66 1) (cons 62 256) (cons 39 0) (cons 6 "BYLAYER"))) (entmake (list (cons 0
[code]....
We currently have a bunch of Lisp programs to create drawings but I am interested in exploring how I can maybe use Lisp with either dynamic blocks or parametric drawings. I just don't know which would make more sense. Currently we have programs where we enter things like width, height, leg or radius, bars wide and high etc and it creates a drawing like the one I've attached. I know that if I can create this drawing as a dynamic block or a parametric drawing, then when there are revisions, I don't need to create the drawing again. I can just adjust the parameter or the dynamic block. What makes the most sense, a dynamic block or a parametric drawing? I should note that I'd still like to use autolisp to create the initial drawing (or insert the block) since that's what the users are used to.
View 9 Replies View Relatedtake a look at this piece of my LISP-routine.
(command "_.block" pause pause ss "")
where:
ss - is a Selection set of some entities
In the rest of code, I don't change the values of initdia, or cmdecho, or whatever else
I haven't sill understood them that well.The problem is the following:
When My routine executes this line, I am promted for:
1. block name - that's OK
2. insertion point - that's OK
3. then the block-command receives correctly the entities from ss-selection set - that's OK
4. then all the object dissapear! **Problem here**
The block is created... I can insert it in the drawing from the block-data base...
But is there a way to let this block stay in the drawing ? without disappearing?
I have a file path im trying to capture in a text file however its not working and autocad is prompting back,
; error bad argument type: streamp nil
Im assuming its because of the slashbacks but Im not sure..
Hence the code so far...
(defun C:GO ()(SETQ ACADLSP (findfile "acad.lsp"))(setq f (open "C: est.txt" "w"))(write-line ACADLSP f)(close f))
like in AutoCAD there is REMEMBERFOLDERS can u tell me if i use syntax with getfiled and i want the path to be remember next time what should i do or what syntax i use for that.
View 1 Replies View RelatedSome of our 64-bit users lose their custom Support File Search Paths.
After reading about it, I saw that I could add them back in by putting
(setenv "ACAD" "S:\Fonts;S:\Acad2007\Hatch_Patterns;S:\Acad2007\Lisp;S:\Acad2007\Simpson\Menu;”)
at the end of acad2013.lsp.
1. However, I get malformed string on input error in AutoCAD.
2. My other question is do I need to list only the custom paths or all of the built-in paths as well?
I want to insert a stored block into a drawing (model space). Below is the code I'm using and I get Runtime Error '5': Invalid procedure call or argument.
Sub Dummy()
Dim COESTD_obj As AcadBlockReference, InsPtStd(0 To 2) As Long, COESTD As String
COESTD = "C:JimHYDROCAD_DwgsBlocksZ_COE_STDS.dwg"
InsPtStd(0) = 0#: InsPtStd(1) = 0#: InsPtStd(2) = 0# 'Set insertion point as 0,0,0
Set COESTD_obj = ThisDrawing.ModelSpace.InsertBlock(InsPtStd, COESTD, 1#, 1#, 1#, 0#)
End Sub
I would like to :
-select an attribute block in my layout viewports
- select a directory where the PDF will be saved
- select the printer
and zoo.
All my layouts will be printed. The files will be created. The filename will be the attribute name (different in each layout viexports).
[ACAD2011 CIVIL3d]
I got this code in a web trawl to insert a block to points taken from a txt file......
its coming back with an error as follows:
; === Top statistic:
; Function definition (with number of arguments): ((C:INSERTBLOCKS . 0))
; Check done.
What does this mean and how can I fix it.
(defun c:insertBlocks (/ txtFile xyData expertVar attreqVar)(setq expertVar (getvar "expert"))
(setq attreqVar (getvar "attreq"))
(setvar "expert" 2)(setvar "attreq" 0)
(setq txtFile (open "c:\cad\textfile.txt" "r")) ;
[Code] ......
We are using a title block and it has an attribute field that links to the file name. Now one of our projects is adding the revision to the CAD file name, but it messes up our drawing sheets.
i.e. It was fine when the CAD file name was 111-A222-ZZ-X-123456.dwg and this would display the complete 111-A222-ZZ-X-123456 in the drawing title.
Now we need to do this, the CAD file name, 111-A222-ZZ-X-123456-001002-A1.dwg and we still need to just show 111-A222-ZZ-X-123456 in the title block, striping away the 001002-A1.
Create a script or a lisp file to match a tif to a drawing file in autocad 2011?
View 9 Replies View RelatedHow can I extract all layers in an open drawing to a notepad or txt file?
View 7 Replies View RelatedI am looking for a Lisp routine that will convert all Mleaders within a drawing file to Qleaders.
AutoCAD 2013
Reason: The Mleaders are causing issues with the viewing software that we have to use with our drawing management program.
I get an AutoCAD drawing from my conveyor manufacturer who have buried a block (tagname) in all of their conveyor blocks.
The only way to remove them is to manually use BEDIT and erase the tagname block.
Is there a way through Autolisp to search all blocks in a drawings and if the tagname block is part of the definition of the conveyor block, erase the tagname block or redefine the conveyor block without the tagname block.
When dynamic blocks are inserted they're assigned an anonymous block name. I'd like to be able to retrieve the name of the parent block after selecting the block on screen using AutoLisp.
Need a bit of code that handles this?
I need to match few attribute values from one block to different block. I download a lisp file called; ca.lsp which can match the single attribute value. I modified it for more than one attribute value matching. It is ok but still wish to overcome two issues for batch prcess
1. picking up the blocks by selection
2. click the alternative block numbers of times to match the numbers of attribute values I needed.
How to modify this lisp I can run it by block name selections instead of picking selection which enable me to run batch process for numbers of drawing? That will be good...
Lisp & Demo file attached (Match attribute value, A, B & C to Attribute 1, 2 & 3).
I am learning autolips and i found a problem that i can´t solved.
(vl-load-com)(defun c:pmb ( / ss ent pt )(prompt "
selec block : ")(setq ss (ssget '((0 . "INSERT")))) (setq ent (ssname ss 0)), (setq pt (cdr (assoc 10 (entget ent)))) (command "point" pt))
wich this code you select one block and insert one point at insert point´s block.
which this other code yo select all block and insert all point.... but in one block
(vl-load-com) (defun c:pmb11 ( / sele cod bloque nbloque lista pt ) (prompt "
block: ") (setq sele (ssget ( List'(0 . "INSERT"))) Cod 0 )cod (1+ cod) (repeat (sslength sele) (setq bloque (ssname sele cod)) (setq pt (cdr (assoc 10 ( entget bloque)))) (command "punto" pt) );repeat )
I have a block that i want to insert several times and revised each one to be different to do this i would have to insert it and rename the blocks that come in and then reinsert i would like to insert and have a lisp explode the main block and rename the other 2 blocks with a suffix at the end depending on how many times its in the drawing... can this even be done? My original block name that will be first inserted is "BENT PULLEY NOTES" it needs to explode after i drop it in and then there are 2 blocks within that called "Bent Pulley" and "Bent Pulley DYN" that i was hoping to keep the names but add a number at the end depending on how many are in the drawing already...
here is a lisp that i have found... it would work if i didn't have nested blocks and only wanted the one block to be insert and not explode...
(defun c:Test (/ e i name Bname )
(setq e nil)
(command "_.-insert" "Drawing1.dwg" pause "" "" "")
(if (setq e (entlast))
[Code] .......
I have a dwg with 40 blocks that have a non-annotative property. I can go through 1 by 1 and change the property to annotative and redefine the block. Is it possible to automate this? I have done some google searches but have not found anything I am able to cut and paste or put together to get it to work.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
I'm trying to get the file name of a file outside the search path. Obviously (findfile) is not an option. The file location changes with each project so adding a search path is also not an option. I can get the path to the file but i can't seem to figure out how to get the file name. I can also get the first set of characters, as they are constant from project to project, it's just the end of the file name that changes. The file is always a PDF.
View 9 Replies View RelatedI'm try to write a list to produce a script file!I just want to insert a dwg file in current drawing.back to MS Windows, in case of having [space] in a folder's name, we should use "" marks:
CD "Program Files"; DEL "file 10.txt"; ....
I tried both with and without "" marks but I failed!I pasted part of my code below with result of each case:
(setq TBFile "H:z.autocadA1 A2 A3.dwg")
(write-line "-INSERT" des)
(write-line (strcat "*" TBFile) des); ; *H:z.autocadA1 A2 A3.dwg <<=should be this
(write-line "0,0" des);;insert point
(write-line "1" des);;xyz scale
(write-line "0" des);;rotation
[code]....
I'm using a Lisp which searches a certain folder and then updates all blocks, which are nested in that folder.
My issue is, that I'd like to use more than one folder on different path, where the LISP can search for this files. Is there a way to use multiple search path?
The code I'm using now to search for the blocks is: (setq dir "I:\AutoCAD Blöcke\Template\Support")
Have issues with creating an AutoCAD deployment and "The path of the added item is too long" error message?
I understand that the paths are limited to 255 characters but I tried just a local path and I get the same error.
Under Additional Files in deployment options, I want to add 2 folders under <Installation Directory> and add 2 files under Support folder.
1st folder would be ARG folder for a custom profile xxx.arg file
2nd folder would be Template with a custom template xxx.dwt file
Under Support, I want to browse and add two files: custom accaddoc.lsp and enterprise acad.cuix file.
All of those files reside on a share drive but the paths are about 40 char so I'm way below the limit.
Every time I want to add a folder under <Installation Directory> I receive the error message:
The path of the added item is too long: "Create New Folder" Please limit this path to -28 characters (currently 17).
So I copied all thos files locally but the same error show up. Is this a bug? I can't customize my deployment if those files are not available.
I have set up a master set of dwg. files we use to create our construction documents. The files consist of a master file that xrefs base files. All of our files are named using the project # first. (i.e. 2011001c.dwg). I have set up the master set using x's to replace the numbers.
Here is how it works:
XXXXXXXc.dwg (master file) relative path xref's the following files.
XXXXXXXlw.dwg
XXXXXXXvlw.dwg
XXXXXXXeg
XXXXXXXfg
XXXXXXXtitleblock
note: all of these files are saved in the same folder.
I am trying to find a way to keep the xref paths working when I copy the files to a project folder and rename the files using the actual job # insead of the x's as place holders. As it is now, when I change the drawing name the reference is lost and I have to manually change all of the xref paths in the xref manager. Is there a command, program, or lisp routine than can change the file names and update the paths automatically.
There are times that I have a really long curb polyline that has both line and arc segments. I wish to pick two points along that polyline and have it give me the distance between those two points along the path of the polyline.
Do we have this ability natively? Have I been missing something all this time? Normally I have to make a copy of the original entity, ... break, break, list erase or undo....
Our I.T department uses kixstart to run a batch script every morning, which is supposed to establish a network connection. The connection is 9/10 times available. 1/10 times it fails and means that workspaces and other user defined settings are inaccessible.
Bringing up the issue with I.T seams to eparch on there skills as a professional so nowadays I tend to bring it up once maybe twice but then settle for ding it my self
So what I found out is the following batch scrip/ snippet is used to establish a network
net use P: \AutoCAD_2012-08-22
I could compile a batch and then launch it using a lisp for example
(command “startapp”….
Or
(command “shell".However this would be hakky and also requires two files (the lisp and then also the bat file, rather keep it simple just the one).Is it possible to establish this connection using lisp?