AutoCAD Visual LISP / AutoLISP :: Extract Image Name From WMS
Nov 25, 2013I have a drawing that has an aerial Images inserted into it using a WMS Connection How to extract Image Name through Autolisp from this
View 5 Replies
ADVERTISEMENT
AutoCAD Visual LISP / AutoLISP :: Extract Label From New WCS
Jun 4, 2013I need a lisp routine that will allow me to pick a polyline and label with azimuth and distance (direction-north, clockwise) of a new WCS.
Is there any code that extract information for a new WCS?
AutoCAD Visual LISP / AutoLISP :: Extract Data From DXF File?
Oct 6, 2011I am trying to write a lisp file that extracts the LAYER, Z, X, Y, TEXT HEIGHT, POINT NUMBER, from the attached DXF file. Ultimately I will have the lisp insert a "POINT" at the X,Y,Z, cords, and then a "TEXT" entity at the same coordinates with the text height value and the point number string. Both entities need to be on the layer ending in "-PN". The layer name will change depending on the date. I have a third party program that creates the DXF file.
The point of the lisp file is to insert the point numbers and points into my drawing at their correct locations. For the life of me I can not make this work. I have attached the little bit of lisp I have, which unfortunately does not work properly because of it searching for the "TEXT" entry in the DXF file of which there are three per point number. I only need one. I have also attached the DXF file I have. maybe just an overall procedure that I can then code myself? I'm just not good at getting lisp to read a file and extract what I want from it.
AutoCAD Visual LISP / AutoLISP :: Extract Point Data
Sep 18, 2000I would like a lisp routine that can extract and export the x, y, z coordinates of all the points in a drawing into a text file so I can use the same in excel.
View 9 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Extract A Folder Name Within Dwgprefix
Aug 17, 2012I’m looking to extract the second from the last directory within the dwgprefix of
"P:Projects66 Structural666-4800-00 TPA666-4815-00 Res4815 Res Figures" (i.e. 666-4815-00 Res)
This is what I have so far:
(defun c:tmp ( )
(setq P1 (getpoint "
Pick point: "))
(command "text" P1 "" ""
(strcat
(vl-filename-base
(vl-string-subst "." "\" (getvar 'dwgprefix) (vl-string-position (ascii "\") (getvar 'dwgprefix) nil T))
))))
AutoCAD Visual LISP / AutoLISP :: Extract Elevations Of Polylines
May 28, 2013A quick lisp routine to extract the elevations of a selection set of 2d polylines? I have a massive "contour" file composed of 2d polylines with elevations. I need to find the min and max polyline elevation in selected areas. I can't figure out how to extract just the elevations of my selected polylines so I can quickly see the elevation values?
View 9 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Extract Linetype From DWG File
Sep 12, 2013I've got a linetype that's part of our autocad template file and has been for so long that nobody around here even knows where the original line file is.
I need to extract the linetype out so that I can make some minor modifications. I did do a search and found a nifty lsp routine from Paul Turvill. (Here's the thread that pointed me there: [URL] ..........
I ran it and it SEEMED to work. All the linetypes in the file it created look good EXCEPT for the one I needed to extract. That one looks like this in the line file:
*TREELINE,Series of arcs used to indicate tree drip lines
A,0.0001,-0.0001,
The linetype DOES display properly in the dwg file (meaning lines drawn using it look good).
AutoCAD Visual LISP / AutoLISP :: Extract Values X Y Z From Vlax-3D-point
Jan 3, 2012how to extract value X Y Z of point p3 p4
(defun c:test ()
(vl-load-com)
(setq actdoc (vla-get-ActiveDocument (vlax-get-acad-object)))
(setq objm (vla-get-ModelSpace actdoc))
(setq obju (vla-get-Utility actdoc))
(setq oldhigh (getvar "Highlight") oldsnap (getvar "Osmode") oldblip (getvar "BlipMode") oldecho (getvar "Cmdecho") );setq
(setvar "Highlight" 0) (setvar "Osmode" 517) (setvar "Cmdecho" 0) (setvar "Blipmode" 0)
[code]....
AutoCAD Visual LISP / AutoLISP :: Extract Attribute Tag Value And Draw Polyline
Apr 25, 2012I have a inserted block with 4 tags for Length, Thickness, Elevation and Width.How can extract attributes tag values and draw a closed polyline + 2 internal lines, parallel to the block?
Block Name: ID_DATA
Tags: LEN, THI, ELE and WID.
Each internal line placed in a third width.
AutoCAD Visual LISP / AutoLISP :: Any Way To Extract All Dimension Text At End Into Excel
Aug 16, 2012I'm dimensioning an old drawing with the real (measured) dimensions and with the drawing dimensions in brackets (using ' 1500 (<>)' to give '1500 (1505)' for example.
What I'd like is to also be able to put on the difference between the length I type in and the length in brackets - as this would let me see any really glaring errors that can't be attributed to user-error on the laser measure.So I could type in '1500 (<>) (X)' where X is the formula, and get ' 1500 (1505) (5)' back?
How to be able to run a script that could highlight any dimensions where the number is brackets and the typed number have a a difference of, say, 50.Or failing that, any way to extract all the dimension text at the end into excel so I can see the differences myself?
AutoCAD Visual LISP / AutoLISP :: How To Sensibly Extract Angular Dimensions As Attributes
May 14, 2012how to sensibly extract angular dimensions as attributes.
I can extract the attributes from a block containing angular dimensions, the attributes list angular dimensions as a field but don't actually list the number of degrees for the angular dimension.
It is the number of degrees that I am actually trying to obtain - but I cannot work out how to obtain the information
AutoCAD Visual LISP / AutoLISP :: Extract Field Expression of Attribute In Block
Mar 8, 2012Is that possible to have a lisp to extract the Field Expression of a attribute in a block?Specifically, to extract the property VALUE (TextString) of this attribute.After to extract, I would like to put this text extracted in a different layout tab, in the same drawing. In this way, I will have a text linked to the attribute value between two layout tabs. So, when I have to change the attribute value, the text will be updated automatically.
I know that if I use the FIELD command to manually copy and paste this value it will work, but when I have a lot of attributes it becomes very laborious.
AutoCAD Visual LISP / AutoLISP :: Extract Radius And Height From Cylinders And Boxes
Jul 23, 2013I design a small plant in Autocad 2012. For the pipes we used cylinders and boxes(for square pipe), now we need to make the bill of materials, but I don't know how to extract the data from each cylinder(radius and height) or box.
It is possible to do this?
I place a small sample from the plant. Totally I am having around 6000 elements.
AutoCAD Visual LISP / AutoLISP :: Extract All Layers In An Open Drawing To A Notepad Or Txt File?
Mar 5, 2012How can I extract all layers in an open drawing to a notepad or txt file?
View 7 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Evaluate That BOTH Attribute Tags Exist In Block And Extract
Sep 15, 2011I was wondering if it was the COND statement that I would need to use to evaluate a block to confirm that two attribute tags existed and if so, if would process the block to perform an attribute extraction of both of those tags. It would ignore blocks that only had one or the other attribute tags - and only extract the attribute values if the block had BOTH of the tags present - It could be blank, but it had to exist.
For example, I want to find blocks that have the attribute tag "PART_A" and "ID" - and then create a CDF that has the value of "PART_A" in the first column and "ID" in the second column. Then it closes my CDF file.
Then, I want it to scan my drawing again for blocks that contain attribute tag "PART_B" and "ID" and then re-open that CDF file and append the values so that the values of teh attribute "PART_B" is in the first column and the values of the tag "ID" are in the second column.
I have been playing with the following code --- is there anyway to modify the code to get it to do what I need? I have already removed the part that writes the header-row....
AutoCAD Visual LISP / AutoLISP :: Ribbon Button Image Won't Repopulate After Modifying Bitmap Image
May 21, 2013I am updating my CUI ribbon for some of my customized buttons. I have changed some of the bitmap images that I have saved in my network folder for the network AutoCAD customization. However, I cannot get the Ribbon to update to show the new button images.
I have opened the CUI, browsed down to the partial CUI for our corporate configuration, then to the "Ribbon", then to the "Tabs", then to the individual section of the tab and clicked on it. Then I click on the specific button in the "Panel Preview" pane to get the properties for that button to show. Then at the bottom of the "Properties" panel, I click on the "Small Image" line to see the three dots that allow you to browse to where the .bmp is stored. I have not renamed the bitmaps, but just modified their color and the way they look. So I have to change the .bmp file to a different location in the small image properties, then change it back to the correct image name. It will update the appearance in the "Panel Preview", but will not update the actual ribbon. I click on "Apply" and "OK", and it still doesn't update the actual ribbon. I have tried closing and restarting AutoCAD after that. As a last resort, I rebooted to see if that would complete the change, but in vain.
I made sure that the network location for the bitmap files is listed in my Options > Support File Search Path (very near the top of the support file list), but that still isn't solving the problem.
How to get AutoCAD to completely forget the old image that is showing on the ribbon and repopulate it with the updated bitmap image?
AutoCAD Visual LISP / AutoLISP :: Dimensions Of Image Slide (DCL And LSP)
Jul 16, 2012I'm not able to control the dimensions of image slide..Whatever value I use for height and width the image is displayed too small in the tile.
here's my
: image {
key = "sld";
height = 5;
width = 30;
[code]....
AutoCAD Visual LISP / AutoLISP :: Image Tile Menu
Oct 24, 2013I am upgrading from 2010 to 2013 and am having a problem with my image tile menu not showing my slides. The dialog box comes up but none of the slides can be viewed. I am using the macro $I=acadbja.GENPLAN1 $I=* Is there an updated command the super cedes this command?
View 1 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Tool Button Image Missing?
Jul 13, 2011I added a couple of standard Autocad MAP tabs to a custom panel and in my custom workspace some of the button images don't show up. If I go to the Planning & Analysis workspace, the images are visible, but in the custom workspace, all I get are clouds with a question mark.
I attached two screen shots.
Civil3D 2014 SP1
Win 7 Professional - 64-bit
HP Z400
Xeon W3550 @ 3.07Ghz
24GB of RAM
Nvidia GeForce GTX 760
AutoCAD Visual LISP / AutoLISP :: Remove Proxy Image From Block
Jul 31, 2013LISP application that will remove Proxy Images from inside a selected block?
View 9 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Dialog Image From 2005 Not Displaying In V2012
Mar 13, 2012I'm trying to bring a lsp routine up to date and it's almost as if I'm a newbie again. A dialog image worked okay in 2005 but in version 2012 displays poorly. So I made a new slide in 2012 and saved it to the same name as the old one, HobMasterDialog.sld, and placed it in the same folder as the old one. However, when the dialog appears the rectangular area for the image is blank.
What am I forgetting?
AutoCAD Visual LISP / AutoLISP :: Calling Image Tile Menu From Routine?
Nov 18, 2011What is the code to call an image tile menu from a lisp command. I currently have a menu item that calls this image tile menu: $I=TYPSMBL1 $I=* but I want to have a keyboard shortcut as well "SL".
View 1 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Text File With A List Of Image Tile Names
Jun 12, 2013I have a text file with a list of image tile names with their bottom left hand easting and northing see attached. I have a lisp that asks for the name of the image then should insert the image at its coordinate with a predefined scale and rotation but it isn't working so I would like an alternative method to test.
View 4 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Change (Reference Name) Of Attached IMAGE Xref TIFF
Feb 13, 2013I am trying to write a LISP that does the following:
-Open drawing
-Saveas as NEW drawing based on certain criteria from DCL menu
-Deletes old drawing
-*THEN, if drawing contain attached IMAGE FILE (.tiff in my case)
-Rename image file and repath image file based on the new file name
I have gotten it to do all of this, except I can not figure out how to change the "reference name" of the attached image file (.tiff)
Is this read-only data? I can manualy change it under xref manager, so there should be a way to do it via code...
The closest I have gotten:
;;after renaming and repath image file...
(SETQ NAME2 (substr (getvar "dwgname") 1 (- (strlen (getvar "dwgname")) 4)))
(setq item (vlax-ename->vla-object (entlast)));convert to vl object
(setq check (vlax-property-available-p item "Name" T));check if the entity can be updated
;if it can
(if check
;change value to match
(vlax-put-property item 'Name NAME2))
'Name seems to be valid w/ xref'd blocks but not xref'd/attached image files..
AutoCAD Visual LISP / AutoLISP :: Continuous Dimension Lisp That Alternate Its Position
Jul 12, 2012Is there a lisp that will allow me to do a continuous dimension, but will alternate the dimension position from low, high, low and high? If there is no lisp already created, how to create one?
See Continuous dimension attachment for example.
I work at a glass and glazing company and this is how we dimension mullion width and DLO. See typical window dimensioning attachment for window elevation with dimensions.
AutoCAD Visual LISP / AutoLISP :: Add String To Each Item In List Using Lisp
Nov 14, 2013I have a list ("temp.dwg" "temp2.dwg") and would like to add the string "insert text here" into each item in the list resulting in ("insert text heretemp.dwg" "insert textheretemp2.dwg"). how would i go about doing that using LISP?
View 2 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Opening Drawings With Default Visual Style Set To 2D Wireframe
Oct 7, 2013Is there a way to programatically set a visual style before a drawing actually opens?
We have some huge models and people seem to forget to change their visual styles back to 2D wireframe before saving and exiting drawings. Some models will crash on some workstations when trying to open in a rendered mode.
I found a lisp with a function that looked to set viewport visual styles. But it does not seem to be supported anymore. --> (vla-put-VisualStyle vport 1)
AutoCAD Visual LISP / AutoLISP :: Write A Lisp Routine That Invoke The Mleader Command
Oct 11, 2012I'm trying to write a lisp routine that, when I invoke the mleader command, osmode is set to "nearest" & orthomode is set off. I then would like the original settings to be returned.
attached is what I have written so far:-
AutoCAD Visual LISP / AutoLISP :: Visual Effect Settings?
Jun 20, 2013Lisp that switches back on Selection Preview i.e. thickens and highlights lines when you hover over them?I don't know why, but they are always unticking the boxes.
View 4 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Combinations In DCL?
Sep 7, 2012Is it possible to execute a certain command based on multiple selections withinin a dcl? for example: two radio colums, one with selections A and B, and a second with selections 1 and 2. is it possible to program commands based on user selections from each column? ex: if A and 1- do a command. A 2- do a different command, etc...
I tried :
(action_tile "key1" "(setq A t")
(action_tile "key2" "(setq B t")
(action_tile "key3" "(setq 1 t)(done_dialog)")
(action_tile "key4" "(setq 2 t)(done_dialog)")
(if
(and (a) (1)
)
(command ...
but was unsuccessful. no matter which combination was selected, the command under all combinations would run.
AutoCAD Visual LISP / AutoLISP :: Get Attribute Value
Jun 3, 2013I am trying to find a lisp that would get an attribute value (tag name = NBR_5) . I'm trying to run a simple routine that would let the user place the value from the titleblock attribute as text on a drawing. I see a ton of articles regarding getting attributes but I am not well versed in programming.
View 9 Replies View Related