Whenever i save a file in Photoshop CC or i save as it crashes and gives me the "Adobe Photoshop cc has stopped working" so i can't use Photoshop CC for this reason. I have it sometimes with Illustrator CC as well.
View 18 Repliesi cannot access photoshop while accessing it from the start menu shortcut .it says adobe cs5 has stopped working.But can access it through bridge without the filters.
View 4 Replies View RelatedI have a problem with my photoshop cs6 everytime it give me an error during using it, and give me a message "adobe photoshop CS6 has stopped working".
View 1 Replies View RelatedAdobe Photoshop CS6 has Stopped working when either NIK or OnOne plugins are accessed from within Photoshop running in Win7 64bit.
View 4 Replies View RelatedInstalled CC photoshop on a brand new W530 laptop. Upon launching either the normal or 64 bit versions of photoshop CC, the application loads then I receive the following error...
"Adobe Photoshop CC has stopped working"
I am unable to use the application, I have removed and reinstalled also in an attempt to correct the issue. investigation of the event log results in the error below.
Log Name: Application
Source: Application Error
Date: 7/17/2013 9:24:12 AM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: TAG004144.tagusa.com
[code]....
Photoshop was working yesterday, but now I'm getting this message:
"Adobe Photoshop has stopped working.
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
I have uninstalled/reinstalled Photoshop numberous times, tried to reset the preferences numberous times, and still get the same message.
DELL XPS 1530
Windows Vista Home Premium
3GB RAM
Adobe CS3 Design Premium
For more than two years I had no problems that were encountered using Adobe Photoshop Lightroom 3.2 (which was upgraded to Adobe PS Lightroom 3.6). Until last month I could not open my Lightroom v 3.6. with this message on the screen --- "Lightroom -- Opening Catlog Studio Session-003.JPG.lrcat"
To remove the cause which I believed was in the later version of Lightroom v 3.6, I uninstalled Lightroom v 3.6 and reinstalled the Lightroon v 3.2 from the DVD I purchased more than two years ago. After reinstalling LR 3.2, I restarted my computer and after that I double-clicked the LR icon giving me this message: “Lightroom – Opening Catalog: Studio Session-003.JPG.lrcat”
In the box I saw this message:
Adobe Photoshop Lightroom 64-bit has stopped working A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. Close program
I have Creative Cloud subscription and Photoshop 3D Extrusion used to work fine (though slow).
After latest update several days ago it stopped working, displaying an error message instead:
"The 3D features require that 'Use Graphics Processor' is enabled in the Performance preferences. Your video card must meet the minimum requirements and you may need to check that your driver is working correctly"
The Graphic Processor is enabled, and the driver is working fine.
Is this a bug or a "feature" in new version? How to make it work as before the update?
Adobe Photoshop CS6 has Stopped working when either Liquify Filter is accessed from within Photoshop running in Win7 32bit. How to keep PS on the air?
View 1 Replies View RelatedI keep getting an error whenever I try to open up illustrator that says that illustrator has stopped working and that "a problem caused the program to stop working correctly. Windows will close the program and notify me if a solution is available."
View 3 Replies View RelatedAdobe Bridge (CS6) Stopped Working & Application Manager Fails No Matter What I do.
I have uninsalled, ran the cleaner, installed, and Bridge will not open, Application manager will not run.
Win 7 x64 Pro
CS6
My liquify filter has suddenly stopped working.
View 6 Replies View RelatedI have a problem with Adobe CS6 Illustrator both 32 and 64 bit has this error. It keeps crashing randomly and i get the message Adobe Illustrator has stopped working.All updates are installed for illustrator.
View 5 Replies View RelatedI'm getting this message:
"Adobe Photoshop has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
I have uninstalled/reinstalled Photoshop and still get the same message.
DELL XPS 420
Windows Vista Home Premium.
3GB RAM
Adobe CS3 Design Premium
I have Photoshop CS3. it was working perfectly. Today both the File > New and File > Open do nothing. Dragging a photoshop file onto the program does not open it. Creating a new document brings up the dialogue but clicking ok does not create a new document. Nothing happens.
View 1 Replies View RelatedFor the past three days i have been working on a drawing in photoshop CS6. I was working on it this morning and it went just fine. I save it and when i quite the program a message appeared saying Photoshop has stoped working.
The file was still in the place i saved it, everything seemed ok so i took a brake. A few hours later i tried to open it again and a message apeared saying Photoshop could not open the file because it is not a valid Photoshop file I have tried to open previous .psd files and they worked just fine.
Lightroom 3.3 just stopped working error says lightroom has stopped working and shuts down. installed photoshop CS3 is that the problem?
View 2 Replies View RelatedI was working on a layer effect.
and it just stopped working.
i restarted PS, rebooted my PC... tried all other layers and different projects...
the blending options work and can be checked and unchecked.
but the Styles wont work.
they cant be clicked or checked.
I've designed my vector font and exported the first letter as .ttf. in a new Font File.
When exporting the second letter, it asks me if I want to replace the file, and then says CorelDraw has stopped working. I've re-installed X4, but to no avail.
My OS is Vista.
Like the subject says. I know there is a place to check or uncheck whether you want Adobe Reader to launch after you have saved a file to .pdf but for the life of me I can't remember where that is located.
Inventor 2012
Windows 7 64 Bit
I just recently updated to the Creative Cloud and now when I'm trying to save my file in Photoshop to any file format other then PSD, it will randomly choose a file format that I didn't choose.
For example, if I choose to save the file as a jpg, the file extension after the name at the top will say iff. No matter what I choose, nothing matches the file extension being shown at the top. So, I have to go through each file format to see which one will show the jpg extension
I have recently bought a copy of CS6 Production Premium classroom in a book. I am going through it, and am currently busy with lesson 6. In this particular lesson, I need to open a PNG file that was supplied. The PNG file is 53kb. There are a few steps after that, including selecting the object, and using "Image Trace", "Make and Expand". After this step, a few layer deletes are called for. Once all this is completed, I am supposed to save the edited file as an "AI" file. when I select the "Save as" function, browse to the location I wish to save it, and then name it and select "OK", the program freezes for a few seconds, and then I get the dreaded "Adobe Illustrator has stopped working" message. The program then closes, and I have to start again.
I have tried the following solutions so far:
1) Open the file and without any editing at all, try to save - This has the same error
2) Opened the original file in Photoshop and saved it as a PSD file
2.1) Opened the new PSD file in Illustrator and tried to save - This had the same error
3) Created a new Illustrator document. Typed some random text. tried to save as an AI file - This saved with no problems.
I am running a Windows 7 PC..here are the PC specs: Is this a known issue with the training material perhaps?
creating several collections in Bridge the other day (5 collections with about 20 images in each). After closing and restarting Bridge the collections were still in the list, but with (0) Items in them.
Figured it was a one-time-glitch and started sorting in collections again, and now after restarting Bridge the collections have 0 items in them yet again.
Note, the collections are just collections, not smart collections. I have used this feature frequently, always worked fine until just now.
Already tried resetting Bridge preferences with holding down ctrl-alt-shift on startup, didnt work - just lost all configuration settings.
I recently had to have a new hard drive and motherboard installed on my PC, which is running Win 7. I didn't have any problems at all with Elements prior to this.
I haven't opened PSE 12 for a few days.
My normal workflow is:
Open RAW file, edit, then separately save PSD and JPG in Irfanview (maybe an odd choice but it's familiar and easy to use).
Just recently I've noticed a problem in Irfanview when entering and saving IPTC data, in that suddenly I'm told the file isn't found, when I try to open it the image area is black, and all I can do is delete it. This is possibly unrelated to my PSE 12 problem, however each time the only way to get a usable copy of the JPG is to re-open the PSD in Elements and re-save as a JPG.
Today, in Elements, when I go to Save As (my usual choice) I go through the usual process but when I check on my hard drive the JPG hasn't been saved.
And before you say "It's because it's 14 years old", know that it was working perfectly until about two months ago.
I have a Windows 7 laptop with 4GB memory, plenty of HD space, and no other PC issues.
My Photoshop CS4 and CS5 shows "Photoshop has stopped working" . Whereas I have Windows 7 64bit, 6GB RAM, 512MB Graphics Card.
Earlier I worked in this version. But after formating my conputer I could not do anything with only in Photoshop. First I installed Photoshop CS4 it was failed to work then install Photoshop CS5..It also failed to work.
I updated Photoshop CC about 7 days ago. Before that it worked fine, since then I have been using Photoshop CS6 for some work (CC left it there when it installed) but yesterday I wanted to go to Photoshop CC from Lightroom 5.2 and Photoshop CC hung. Rebooted computer and tried to open Photoshop CC but it crashes on initialization.
As interim measure I installed PS CS6 as an optional external editor in Lightroom, but I would like to use Photoshop CC again one day!
Yesterday, I tried to start up Photoshop, but it got halfway through initializing and stopped, flashing a message: "Adobe Photoshop CS5.1 has stopped working." I shut down the computer and tried again, but it repeated three or four times.
So I uninstalled the program. Upon reinstallation, installation failed and the computer said: "Your installation encountered errors. Please try restarting your system and installing again. Exit Code: 20."
I have been using my program since June without issue. Suddenly it stopped working. I can open the program but it will not create a new file or open an existing file. If I "open with" from windows explorer it won't open either. I have uninstalled and reinstalled the program and I'm still not having any luck.
View 1 Replies View RelatedI get an error message from windows vista premiumm home.
It just says: Adobe Photoshop CS3 has stopped working correctly. Windows will close the program and notify you if a solution is available. The only option is a box that says "close program". Once you close it everything goes away. It doesn't even give you a hint of what the problem could be. I installed creative suite 3 web premium on this brand new computer about 2 weeks ago. This is a first time install of this software, but when I called Adobe they said they don't offer free installation help anymore on cs3 because cs4 is out now. Anyone have a clue what I should do? I can't just uninstall photoshop, if I try it wants to uninstall all 8 programs.
I am working on a floor plan in CS5 Photoshop. Just basically tracing over an original document and erasing what I trace over. I do this all the time and it has been working fine.
But now the eraser won't work at all. When i turn off all the layers except the background layer I can erase things, but then when I turn the layers back on, it doesn't show up erased. I've tried resetting the tool and that didn't work. I'm so confused as to why it just stopped working.