Lightroom :: Adobe Photoshop 64-bit Has Stopped Working?
Jun 1, 2013
For more than two years I had no problems that were encountered using Adobe Photoshop Lightroom 3.2 (which was upgraded to Adobe PS Lightroom 3.6). Until last month I could not open my Lightroom v 3.6. with this message on the screen --- "Lightroom -- Opening Catlog Studio Session-003.JPG.lrcat"
To remove the cause which I believed was in the later version of Lightroom v 3.6, I uninstalled Lightroom v 3.6 and reinstalled the Lightroon v 3.2 from the DVD I purchased more than two years ago. After reinstalling LR 3.2, I restarted my computer and after that I double-clicked the LR icon giving me this message: “Lightroom – Opening Catalog: Studio Session-003.JPG.lrcat”
In the box I saw this message:
Adobe Photoshop Lightroom 64-bit has stopped working A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. Close program
View 2 Replies
ADVERTISEMENT
Mar 10, 2013
i cannot access photoshop while accessing it from the start menu shortcut .it says adobe cs5 has stopped working.But can access it through bridge without the filters.
View 4 Replies
View Related
Feb 11, 2013
I have a problem with my photoshop cs6 everytime it give me an error during using it, and give me a message "adobe photoshop CS6 has stopped working".
View 1 Replies
View Related
May 15, 2012
Adobe Photoshop CS6 has Stopped working when either NIK or OnOne plugins are accessed from within Photoshop running in Win7 64bit.
View 4 Replies
View Related
Jul 17, 2013
Installed CC photoshop on a brand new W530 laptop. Upon launching either the normal or 64 bit versions of photoshop CC, the application loads then I receive the following error...
"Adobe Photoshop CC has stopped working"
I am unable to use the application, I have removed and reinstalled also in an attempt to correct the issue. investigation of the event log results in the error below.
Log Name: Application
Source: Application Error
Date: 7/17/2013 9:24:12 AM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: TAG004144.tagusa.com
[code]....
View 5 Replies
View Related
Sep 16, 2008
Photoshop was working yesterday, but now I'm getting this message:
"Adobe Photoshop has stopped working.
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
I have uninstalled/reinstalled Photoshop numberous times, tried to reset the preferences numberous times, and still get the same message.
DELL XPS 1530
Windows Vista Home Premium
3GB RAM
Adobe CS3 Design Premium
View 9 Replies
View Related
Jul 2, 2013
Whenever i save a file in Photoshop CC or i save as it crashes and gives me the "Adobe Photoshop cc has stopped working" so i can't use Photoshop CC for this reason. I have it sometimes with Illustrator CC as well.
View 18 Replies
View Related
Dec 15, 2012
I have Creative Cloud subscription and Photoshop 3D Extrusion used to work fine (though slow).
After latest update several days ago it stopped working, displaying an error message instead:
"The 3D features require that 'Use Graphics Processor' is enabled in the Performance preferences. Your video card must meet the minimum requirements and you may need to check that your driver is working correctly"
The Graphic Processor is enabled, and the driver is working fine.
Is this a bug or a "feature" in new version? How to make it work as before the update?
View 5 Replies
View Related
May 24, 2012
Adobe Photoshop CS6 has Stopped working when either Liquify Filter is accessed from within Photoshop running in Win7 32bit. How to keep PS on the air?
View 1 Replies
View Related
Jan 1, 2013
Lightroom 3.3 just stopped working error says lightroom has stopped working and shuts down. installed photoshop CS3 is that the problem?
View 2 Replies
View Related
Aug 15, 2013
I keep getting an error whenever I try to open up illustrator that says that illustrator has stopped working and that "a problem caused the program to stop working correctly. Windows will close the program and notify me if a solution is available."
View 3 Replies
View Related
Nov 2, 2013
Adobe Bridge (CS6) Stopped Working & Application Manager Fails No Matter What I do.
I have uninsalled, ran the cleaner, installed, and Bridge will not open, Application manager will not run.
Win 7 x64 Pro
CS6
View 3 Replies
View Related
Oct 13, 2012
My liquify filter has suddenly stopped working.
View 6 Replies
View Related
Apr 12, 2013
I have a problem with Adobe CS6 Illustrator both 32 and 64 bit has this error. It keeps crashing randomly and i get the message Adobe Illustrator has stopped working.All updates are installed for illustrator.
View 5 Replies
View Related
Sep 2, 2008
I'm getting this message:
"Adobe Photoshop has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
I have uninstalled/reinstalled Photoshop and still get the same message.
DELL XPS 420
Windows Vista Home Premium.
3GB RAM
Adobe CS3 Design Premium
View 6 Replies
View Related
Aug 21, 2012
Working on an image in Lightroom 4, pressing ctrl e (or edit in-CS5 Photoshop) opens that image in Photoshop - only it doesn't?!
Am not aware of having changed anything between it working fine and not.
Rebooting (Win Vista) and restarting LR made no difference.
View 9 Replies
View Related
Mar 27, 2014
After recently installing LR 5 today this message starting appearing. I cannot get around it.
View 2 Replies
View Related
Jan 18, 2014
My Lightroom 5 has virtually stopped working. Starting around the time I installed the 5.3 upgrade, when I click on anything, the program is non- responsive literally for several minutes. sometimes as much as 15 minutes. For example, I'll click "Import", and have yo wait several minutes. Then when it finally responds, I select the folder on the hard drive that has the photos I want. Several more minutes, I select "Move", and wait several more minutes. The whole process for the simple thing I am trying to do can take a half hour.
I have rebooted my machine several times. I have restored the operating system to a time a week ago when I did not have these probalems. I have reverted back to 5.2. I re-installed 5.3.
View 1 Replies
View Related
Jun 12, 2012
My Lightroom 3 has just stopped working. It was version 3.6 and when I went to use it yesterday it just shutdown on me and threw me back to my desktop. I removed it and reinstalled it but the same thing happens.
View 6 Replies
View Related
May 24, 2012
I have just started using Lightroom 4 and absolutely love it....until suddenly my watermarks have stopped working and are not showing when added or exported.
View 2 Replies
View Related
Jan 22, 2014
Within Lightroom 5, I set up a print template for a new Canon ix6550 printer and used it for some months. I happily printed around 40 images.
I sold a few prints, and needed to print identical copies. Up until a few weeks ago, all worked fine.
Then, a few weeks ago, I tried to re-print 2 copies of a single image. The first copy printed OK (it looked like the original), I pressed the 'Print' button once more and the second print came out 'trashed' with extreme increases in saturation and contrast plus a decreased exposure.
I tried altering all sorts of things and printing test strips, but could not get a viable print.
I did not save any changes to the template or to the development settings of the images.
A few days later, I tried again. Without changing anything, the first test strip looked OK, so I went on to successfully print two A4 prints, then the third and all subsequent attempts to print resulted in trashed prints as described above.
Since then, I have determined that if I allow the printer to manage the colours, the test strips look fine. I don't know if I would see a difference on the full sized prints.
So I thought maybe the profile is corrupt? So I downloaded the drivers again from Canon and re-installed - no difference.(Although I do not know enough to locate and delete the originals first.)Should I let the printer manage colours? Will it matter?
View 13 Replies
View Related
Oct 23, 2012
I'm a photography student at the Art Institute's online division. I've been working with LR 3 for the past couple of weeks. Suddenly the program shut down; I got an error message from Windows, saying it would keep looking for a solution, but then I couldn't even open Lightroom at all. I was having the same problem with PhotoShop from the Creative Design Suite 5.5.
I uninstalled both programs, then re-installed. Now PhotoShop's fine, but Lightroom is still doing (or rather NOT doing) what it was before, with the same error message.
Oh--one more thing. I recently bought a Nikon D5100, so I uploaded the two software disks when I was ready to transfer photos directly from the camera to my laptop. I don't THINK this is the problem, since I didn't start using Lightroom until after I uploaded the Nikon software, and both worked fine last week. However, just in case, I uninstalled the Nikon software & haven't yet re-installed that.
View 2 Replies
View Related
Feb 8, 2014
LR 3.6 Import function has stopped working. Worked fine one day and stopped working the next. No Files Found to Import yet you can see the files trhough LR in the import step while the little message in the bottom right corner says "Finding Files".
View 2 Replies
View Related
Oct 2, 2012
I am no longer able to import any new files into Lightroom. I was in the middle of an import and all of a sudden it stopped and the program hung. I am running Win 7 64 with an i7 with 12 gigs of RAM. I have tried uninstalling and reinstalling Lightroom multiple times (Using both the windows installer and via Lightroom and then searched to see if there were any orpne files on my drive. ) , did a system restore to a point about a month ago, tried importing a simple jpeg file from the hard drive as well as CR2 files (Canon) and even DNG files. Also tried setting up a new catalog with no success. Plenty of hard drive space and no drive errors. There is nothing wrong with the files as I can open them in Photoshop. I can see the files on the import screen though they are not always rendered. When I choose import it just starts, says Importing files and hangs. When I finally give up, and I have waited an hour or more, and kill the process I get the message - No photos or videos were found to import. Other tidbits. Takes a long time to be able to select files to import from the import screen. System seems to run for some time before I can select or deselect (If this were a Mac it would show a beach ball during this wait) Each time I quit or try to change catalogues it asks for the weekly backup (my default) even though I backed it up sometimes as recently as within the past 10 minutes and those backups appear to be valid and in the directory. Every other feature, including Export seems to work I just can no longer import files.
View 2 Replies
View Related
Dec 21, 2013
I have always sorted my photos by using star ratings but all of a sudden the filter has stopped working properly.
For instance,
>= 4 stars works as expected
>= 3 stars displays 'no photos match the filter'
It affects my entire catalogue and is fundamental to my workflow.
It seems to affect both my laptop and my desktop computer.
View 2 Replies
View Related
Sep 16, 2012
In a book I am working on, the zoom toggle suddenly stops working. It shows up, but moving the slider does not change the image size in the photo cell. I can still move the photo around in the cell, but cannot zoom in or out. I can right click to change to zoom to fill or zoom to fit, but cannot manually zoom in or out from that. Tried changing the default method to Z2Fit and Z2Fill, but neither mode solves the problem. I have been working on this book for a while, and the manual zoom has worked seamlessly up til now, and suddenly it doesn't work. I am hoping I accidentally hit a keyboard toggle to turn it off somehow, and just can't figure out how to get it back.
fwiw the problem cropped up as I started adding photos from another source, which were Nikon-based jpg files whereas all the rest previously added were either digitial scans (jpeg or tiff) or Pentax files (RAW & jpegs). I cannot imagine this has anything to do with the problem, but mentioning it just because its the only thing that was different when the problem cropped up.
Using LR 4.1, Windows 7
View 1 Replies
View Related
Feb 4, 2013
I have been using lightroom 3.4 and photoshop CS6 for sometime. However suddenly I cant move images from lightroom to photoshop (Ctrl+E) with the "Edit a copy with lightroom adjustment".
When I click this option, it opens the Photoshop. But doesnt open the image. However the other two options "edit a copy" and "Edit original" works fine.
Also when i add photoshop again as another external editor, it works fine. But as you all are aware this create another copy of the image.
What I did I checked the applications path for photoshop and it was correct. I uninstalled lightroom and reinstalled.
View 6 Replies
View Related
May 19, 2012
This is pretty weird. Brand new .lrcat, working through a few family pictures. The first few photos, the adjustment brush was working. A few minutes into it, it stopped working, or at least stopped having nearly as substantial an effect. If I push exposure by +4, it looks as if it's pushing it by .4. Same with other sliders - they are barely applied.
Did I hit some button that globally diminishes the brush strength or something?
Note that, in the second image, the adjustment brush is centered on his head. It's a little different than the first image, but certainly not to the extent one would expect from the sliders pushed to their extremes.
Just for a point of trivia, I installed QuickTime while working in LR. Not sure if that has anything to do with it, but restarting LR and creating a new catalog did not remedy the problem.
View 2 Replies
View Related
Apr 9, 2012
I have the new Canon 5D Mark III, and I updated to Lightroom 4.1 so I can import the 5D3 RAW image into LR. But when I go to "Edit in Adobe Photoshop CS5" or "Merge to HDR Pro in PhotoShop", PS starts, but it doesn't load any files. I was assuming this is because the PS Camera Raw is out of date. So I downloaded the cameraraw6-7_r1_win_030612, but when try to install it, I get "Some updates failed to install. Update is not applicable".
View 7 Replies
View Related
Nov 24, 2012
I have a set of Categories with Collections published at Smugmug. I am trying to map each Category and Collection in Smugmug to a similar Published Smart Collection in Revel using the rules so that when I add a photo into one of my collections in Smugmug it will populate to similar Revel Smart Collection.
In Smugmug I have a category "Portfolio" with a collection "Dogs". There are 75 photos in this collection.
I create a Revel Publish service for a library "Portfolio".
Now I go to the left sidebar and for this Revel service, I create a new Published Smart Collection. I title it "Dogs". I set the rule to Publish Collection starts with Dogs. The result is over 400 photos selected.
What appears to happen is that any Published Collection with the word Dogs in it is being used, even though the name of the published collection is for example "Our Dogs" or "Example Dogs".
The rule "Starts with" does not seem to work.
View 6 Replies
View Related
Feb 28, 2013
And before you say "It's because it's 14 years old", know that it was working perfectly until about two months ago.
I have a Windows 7 laptop with 4GB memory, plenty of HD space, and no other PC issues.
View 9 Replies
View Related