I have always sorted my photos by using star ratings but all of a sudden the filter has stopped working properly.
For instance,
>= 4 stars works as expected
>= 3 stars displays 'no photos match the filter'
It affects my entire catalogue and is fundamental to my workflow.
It seems to affect both my laptop and my desktop computer.
I can't seem to keep my star ratings on my files after I export them to JPG. My export settings are set to keep "All" metadata, but this doesn't seem to change it.
View 2 Replies View RelatedHow do I get the flag/star rating system back in the bottom left of LR4?
View 2 Replies View RelatedIs there any way of filtering files by rating BEFORE importing them from my camera to my PC? I can sort them once they have been imported but it would save a lot of hard drive space if I could only import the ones I rated before importing.
View 1 Replies View RelatedI am fairly new to lightroom. I pulled up 500 or so images from a wedding and went through them quickly starring them with the left and right brackets. When I was finished I went to the grid view in the library module and clicked on the filters, filter by rating, greater than or equal to one star (my images were in a collection by the way). When I hit that it says that no photos match my filter. Why?
View 3 Replies View RelatedLightroom 3.3 just stopped working error says lightroom has stopped working and shuts down. installed photoshop CS3 is that the problem?
View 2 Replies View RelatedUsing Elements 11, cannot get the Star Rating bar to appear under images imported from file, although the intro to the program shows this as happening automatically. I have also created an account, but the question does not seem to be get a post.
View 2 Replies View RelatedSo, yesterday I was trying to halftone an image. Everything was working fine, but I couldn't figure out how to use it the way I wanted to. So I found a tutorial. I read it, figured out what I was doing wrong, went on my way. Everything seemed fine.
Then I went to use my newfound knowledge, and lo and behold, the Newsprint filter stopped working. No matter what I tried, the preview image looked just like the original. And when I tried applying the filter anyway, figuring maybe something was just up with the preview panel, nothing happened. The filter pauses to load when I change something, acting like it's working, but nothing happens. The closest thing I've been able to get was the image completely disappearing when I change a certain setting (switch to luminosity, in case you were wondering). I tried googling my problem, but all that gets me is tutorials and the how-to-use guide.
I currently use a different photo organizer and wish to migrate to PSE11, provided it meets this criteria. I have over 200K images that have already been tagged, and I need granularity in searching for items. I normally search in a cumulative fashion, where each criterion I add further reduces the number of images that meet all the criteria. Does PSE11 have a "meets ALL criteria" option, or rather, does it only display results that "meet ANY criteria" that I may have specified? In other words, the more criteria I add, the less images I should see that are filtered based on ALL the criteria.
View 3 Replies View Relatedout of the blue, my layer styles have stopped working --- can't stroke, emboss, drop shadow anything. instead i get a "could not complete your request because of a program error" message.
what's going on?
i recently installed Alien Skin's Snap Art 3, but uninstalling the program has had no effect?
(btw, running windows 7, CS6)
Adobe Photoshop CS6 has Stopped working when either Liquify Filter is accessed from within Photoshop running in Win7 32bit. How to keep PS on the air?
View 1 Replies View Relatedwhen I select an area of a photo and attempt to use the 'dust and scratches' filter, Elements 11 jumps to the 'Hand Tool' and locks up. This is on a Windows 8 machine.
View 3 Replies View RelatedMy liquify filter has suddenly stopped working.
View 6 Replies View RelatedAfter recently installing LR 5 today this message starting appearing. I cannot get around it.
View 2 Replies View RelatedMy Lightroom 5 has virtually stopped working. Starting around the time I installed the 5.3 upgrade, when I click on anything, the program is non- responsive literally for several minutes. sometimes as much as 15 minutes. For example, I'll click "Import", and have yo wait several minutes. Then when it finally responds, I select the folder on the hard drive that has the photos I want. Several more minutes, I select "Move", and wait several more minutes. The whole process for the simple thing I am trying to do can take a half hour.
I have rebooted my machine several times. I have restored the operating system to a time a week ago when I did not have these probalems. I have reverted back to 5.2. I re-installed 5.3.
My Lightroom 3 has just stopped working. It was version 3.6 and when I went to use it yesterday it just shutdown on me and threw me back to my desktop. I removed it and reinstalled it but the same thing happens.
View 6 Replies View RelatedI have just started using Lightroom 4 and absolutely love it....until suddenly my watermarks have stopped working and are not showing when added or exported.
View 2 Replies View RelatedWithin Lightroom 5, I set up a print template for a new Canon ix6550 printer and used it for some months. I happily printed around 40 images.
I sold a few prints, and needed to print identical copies. Up until a few weeks ago, all worked fine.
Then, a few weeks ago, I tried to re-print 2 copies of a single image. The first copy printed OK (it looked like the original), I pressed the 'Print' button once more and the second print came out 'trashed' with extreme increases in saturation and contrast plus a decreased exposure.
I tried altering all sorts of things and printing test strips, but could not get a viable print.
I did not save any changes to the template or to the development settings of the images.
A few days later, I tried again. Without changing anything, the first test strip looked OK, so I went on to successfully print two A4 prints, then the third and all subsequent attempts to print resulted in trashed prints as described above.
Since then, I have determined that if I allow the printer to manage the colours, the test strips look fine. I don't know if I would see a difference on the full sized prints.
So I thought maybe the profile is corrupt? So I downloaded the drivers again from Canon and re-installed - no difference.(Although I do not know enough to locate and delete the originals first.)Should I let the printer manage colours? Will it matter?
I'm a photography student at the Art Institute's online division. I've been working with LR 3 for the past couple of weeks. Suddenly the program shut down; I got an error message from Windows, saying it would keep looking for a solution, but then I couldn't even open Lightroom at all. I was having the same problem with PhotoShop from the Creative Design Suite 5.5.
I uninstalled both programs, then re-installed. Now PhotoShop's fine, but Lightroom is still doing (or rather NOT doing) what it was before, with the same error message.
Oh--one more thing. I recently bought a Nikon D5100, so I uploaded the two software disks when I was ready to transfer photos directly from the camera to my laptop. I don't THINK this is the problem, since I didn't start using Lightroom until after I uploaded the Nikon software, and both worked fine last week. However, just in case, I uninstalled the Nikon software & haven't yet re-installed that.
For more than two years I had no problems that were encountered using Adobe Photoshop Lightroom 3.2 (which was upgraded to Adobe PS Lightroom 3.6). Until last month I could not open my Lightroom v 3.6. with this message on the screen --- "Lightroom -- Opening Catlog Studio Session-003.JPG.lrcat"
To remove the cause which I believed was in the later version of Lightroom v 3.6, I uninstalled Lightroom v 3.6 and reinstalled the Lightroon v 3.2 from the DVD I purchased more than two years ago. After reinstalling LR 3.2, I restarted my computer and after that I double-clicked the LR icon giving me this message: “Lightroom – Opening Catalog: Studio Session-003.JPG.lrcat”
In the box I saw this message:
Adobe Photoshop Lightroom 64-bit has stopped working A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. Close program
LR 3.6 Import function has stopped working. Worked fine one day and stopped working the next. No Files Found to Import yet you can see the files trhough LR in the import step while the little message in the bottom right corner says "Finding Files".
View 2 Replies View RelatedI have CS6, Elements 10, and Light room 3.6. I'm looking for a Star filter to work with CS6.
View 7 Replies View RelatedHas anyone out there had experience with creating a cross star filter effect using PS7? I realize that in an ideal world the effect would be created on the camera lens, but who lives in a perfect world? Photoshop allows us to turn our imperfections into perfections. I would like to create a 4 point and a 6 point cross star effect, but am clueless on were to start.
View 1 Replies View RelatedI am no longer able to import any new files into Lightroom. I was in the middle of an import and all of a sudden it stopped and the program hung. I am running Win 7 64 with an i7 with 12 gigs of RAM. I have tried uninstalling and reinstalling Lightroom multiple times (Using both the windows installer and via Lightroom and then searched to see if there were any orpne files on my drive. ) , did a system restore to a point about a month ago, tried importing a simple jpeg file from the hard drive as well as CR2 files (Canon) and even DNG files. Also tried setting up a new catalog with no success. Plenty of hard drive space and no drive errors. There is nothing wrong with the files as I can open them in Photoshop. I can see the files on the import screen though they are not always rendered. When I choose import it just starts, says Importing files and hangs. When I finally give up, and I have waited an hour or more, and kill the process I get the message - No photos or videos were found to import. Other tidbits. Takes a long time to be able to select files to import from the import screen. System seems to run for some time before I can select or deselect (If this were a Mac it would show a beach ball during this wait) Each time I quit or try to change catalogues it asks for the weekly backup (my default) even though I backed it up sometimes as recently as within the past 10 minutes and those backups appear to be valid and in the directory. Every other feature, including Export seems to work I just can no longer import files.
View 2 Replies View RelatedWorking on an image in Lightroom 4, pressing ctrl e (or edit in-CS5 Photoshop) opens that image in Photoshop - only it doesn't?!
Am not aware of having changed anything between it working fine and not.
Rebooting (Win Vista) and restarting LR made no difference.
In a book I am working on, the zoom toggle suddenly stops working. It shows up, but moving the slider does not change the image size in the photo cell. I can still move the photo around in the cell, but cannot zoom in or out. I can right click to change to zoom to fill or zoom to fit, but cannot manually zoom in or out from that. Tried changing the default method to Z2Fit and Z2Fill, but neither mode solves the problem. I have been working on this book for a while, and the manual zoom has worked seamlessly up til now, and suddenly it doesn't work. I am hoping I accidentally hit a keyboard toggle to turn it off somehow, and just can't figure out how to get it back.
fwiw the problem cropped up as I started adding photos from another source, which were Nikon-based jpg files whereas all the rest previously added were either digitial scans (jpeg or tiff) or Pentax files (RAW & jpegs). I cannot imagine this has anything to do with the problem, but mentioning it just because its the only thing that was different when the problem cropped up.
Using LR 4.1, Windows 7
I have been using lightroom 3.4 and photoshop CS6 for sometime. However suddenly I cant move images from lightroom to photoshop (Ctrl+E) with the "Edit a copy with lightroom adjustment".
When I click this option, it opens the Photoshop. But doesnt open the image. However the other two options "edit a copy" and "Edit original" works fine.
Also when i add photoshop again as another external editor, it works fine. But as you all are aware this create another copy of the image.
What I did I checked the applications path for photoshop and it was correct. I uninstalled lightroom and reinstalled.
This is pretty weird. Brand new .lrcat, working through a few family pictures. The first few photos, the adjustment brush was working. A few minutes into it, it stopped working, or at least stopped having nearly as substantial an effect. If I push exposure by +4, it looks as if it's pushing it by .4. Same with other sliders - they are barely applied.
Did I hit some button that globally diminishes the brush strength or something?
Note that, in the second image, the adjustment brush is centered on his head. It's a little different than the first image, but certainly not to the extent one would expect from the sliders pushed to their extremes.
Just for a point of trivia, I installed QuickTime while working in LR. Not sure if that has anything to do with it, but restarting LR and creating a new catalog did not remedy the problem.
lightroom 5 radial filter is not working. It was working fine, but now I can't apply a radial Filter at all.
View 3 Replies View RelatedThe Hide Rejcets filter has been functioning perfectly until recently. Now when selected, it shows Flagged and Unflagged photos (including rejects). How can I make this filter only show pics that have not been flagged as rejected?
Using Lightroom 4 (LR4) on iMac OS X 10.7.4
I notice that when viewing by rating (1, 2, 3, stars...) the program defaults to viewing the rating you choose and above. So, say I want to just see four star photos, it's showing me four and five star photos. Is there any way to set the rating function to only show those star rated photos I want to see?
View 2 Replies View Related