My Lightroom 3 has just stopped working. It was version 3.6 and when I went to use it yesterday it just shutdown on me and threw me back to my desktop. I removed it and reinstalled it but the same thing happens.
View 6 RepliesLightroom 3.3 just stopped working error says lightroom has stopped working and shuts down. installed photoshop CS3 is that the problem?
View 2 Replies View RelatedAfter recently installing LR 5 today this message starting appearing. I cannot get around it.
View 2 Replies View RelatedMy Lightroom 5 has virtually stopped working. Starting around the time I installed the 5.3 upgrade, when I click on anything, the program is non- responsive literally for several minutes. sometimes as much as 15 minutes. For example, I'll click "Import", and have yo wait several minutes. Then when it finally responds, I select the folder on the hard drive that has the photos I want. Several more minutes, I select "Move", and wait several more minutes. The whole process for the simple thing I am trying to do can take a half hour.
I have rebooted my machine several times. I have restored the operating system to a time a week ago when I did not have these probalems. I have reverted back to 5.2. I re-installed 5.3.
I have just started using Lightroom 4 and absolutely love it....until suddenly my watermarks have stopped working and are not showing when added or exported.
View 2 Replies View RelatedWithin Lightroom 5, I set up a print template for a new Canon ix6550 printer and used it for some months. I happily printed around 40 images.
I sold a few prints, and needed to print identical copies. Up until a few weeks ago, all worked fine.
Then, a few weeks ago, I tried to re-print 2 copies of a single image. The first copy printed OK (it looked like the original), I pressed the 'Print' button once more and the second print came out 'trashed' with extreme increases in saturation and contrast plus a decreased exposure.
I tried altering all sorts of things and printing test strips, but could not get a viable print.
I did not save any changes to the template or to the development settings of the images.
A few days later, I tried again. Without changing anything, the first test strip looked OK, so I went on to successfully print two A4 prints, then the third and all subsequent attempts to print resulted in trashed prints as described above.
Since then, I have determined that if I allow the printer to manage the colours, the test strips look fine. I don't know if I would see a difference on the full sized prints.
So I thought maybe the profile is corrupt? So I downloaded the drivers again from Canon and re-installed - no difference.(Although I do not know enough to locate and delete the originals first.)Should I let the printer manage colours? Will it matter?
I'm a photography student at the Art Institute's online division. I've been working with LR 3 for the past couple of weeks. Suddenly the program shut down; I got an error message from Windows, saying it would keep looking for a solution, but then I couldn't even open Lightroom at all. I was having the same problem with PhotoShop from the Creative Design Suite 5.5.
I uninstalled both programs, then re-installed. Now PhotoShop's fine, but Lightroom is still doing (or rather NOT doing) what it was before, with the same error message.
Oh--one more thing. I recently bought a Nikon D5100, so I uploaded the two software disks when I was ready to transfer photos directly from the camera to my laptop. I don't THINK this is the problem, since I didn't start using Lightroom until after I uploaded the Nikon software, and both worked fine last week. However, just in case, I uninstalled the Nikon software & haven't yet re-installed that.
For more than two years I had no problems that were encountered using Adobe Photoshop Lightroom 3.2 (which was upgraded to Adobe PS Lightroom 3.6). Until last month I could not open my Lightroom v 3.6. with this message on the screen --- "Lightroom -- Opening Catlog Studio Session-003.JPG.lrcat"
To remove the cause which I believed was in the later version of Lightroom v 3.6, I uninstalled Lightroom v 3.6 and reinstalled the Lightroon v 3.2 from the DVD I purchased more than two years ago. After reinstalling LR 3.2, I restarted my computer and after that I double-clicked the LR icon giving me this message: “Lightroom – Opening Catalog: Studio Session-003.JPG.lrcat”
In the box I saw this message:
Adobe Photoshop Lightroom 64-bit has stopped working A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. Close program
LR 3.6 Import function has stopped working. Worked fine one day and stopped working the next. No Files Found to Import yet you can see the files trhough LR in the import step while the little message in the bottom right corner says "Finding Files".
View 2 Replies View RelatedI am no longer able to import any new files into Lightroom. I was in the middle of an import and all of a sudden it stopped and the program hung. I am running Win 7 64 with an i7 with 12 gigs of RAM. I have tried uninstalling and reinstalling Lightroom multiple times (Using both the windows installer and via Lightroom and then searched to see if there were any orpne files on my drive. ) , did a system restore to a point about a month ago, tried importing a simple jpeg file from the hard drive as well as CR2 files (Canon) and even DNG files. Also tried setting up a new catalog with no success. Plenty of hard drive space and no drive errors. There is nothing wrong with the files as I can open them in Photoshop. I can see the files on the import screen though they are not always rendered. When I choose import it just starts, says Importing files and hangs. When I finally give up, and I have waited an hour or more, and kill the process I get the message - No photos or videos were found to import. Other tidbits. Takes a long time to be able to select files to import from the import screen. System seems to run for some time before I can select or deselect (If this were a Mac it would show a beach ball during this wait) Each time I quit or try to change catalogues it asks for the weekly backup (my default) even though I backed it up sometimes as recently as within the past 10 minutes and those backups appear to be valid and in the directory. Every other feature, including Export seems to work I just can no longer import files.
View 2 Replies View RelatedI have always sorted my photos by using star ratings but all of a sudden the filter has stopped working properly.
For instance,
>= 4 stars works as expected
>= 3 stars displays 'no photos match the filter'
It affects my entire catalogue and is fundamental to my workflow.
It seems to affect both my laptop and my desktop computer.
Working on an image in Lightroom 4, pressing ctrl e (or edit in-CS5 Photoshop) opens that image in Photoshop - only it doesn't?!
Am not aware of having changed anything between it working fine and not.
Rebooting (Win Vista) and restarting LR made no difference.
In a book I am working on, the zoom toggle suddenly stops working. It shows up, but moving the slider does not change the image size in the photo cell. I can still move the photo around in the cell, but cannot zoom in or out. I can right click to change to zoom to fill or zoom to fit, but cannot manually zoom in or out from that. Tried changing the default method to Z2Fit and Z2Fill, but neither mode solves the problem. I have been working on this book for a while, and the manual zoom has worked seamlessly up til now, and suddenly it doesn't work. I am hoping I accidentally hit a keyboard toggle to turn it off somehow, and just can't figure out how to get it back.
fwiw the problem cropped up as I started adding photos from another source, which were Nikon-based jpg files whereas all the rest previously added were either digitial scans (jpeg or tiff) or Pentax files (RAW & jpegs). I cannot imagine this has anything to do with the problem, but mentioning it just because its the only thing that was different when the problem cropped up.
Using LR 4.1, Windows 7
I have been using lightroom 3.4 and photoshop CS6 for sometime. However suddenly I cant move images from lightroom to photoshop (Ctrl+E) with the "Edit a copy with lightroom adjustment".
When I click this option, it opens the Photoshop. But doesnt open the image. However the other two options "edit a copy" and "Edit original" works fine.
Also when i add photoshop again as another external editor, it works fine. But as you all are aware this create another copy of the image.
What I did I checked the applications path for photoshop and it was correct. I uninstalled lightroom and reinstalled.
This is pretty weird. Brand new .lrcat, working through a few family pictures. The first few photos, the adjustment brush was working. A few minutes into it, it stopped working, or at least stopped having nearly as substantial an effect. If I push exposure by +4, it looks as if it's pushing it by .4. Same with other sliders - they are barely applied.
Did I hit some button that globally diminishes the brush strength or something?
Note that, in the second image, the adjustment brush is centered on his head. It's a little different than the first image, but certainly not to the extent one would expect from the sliders pushed to their extremes.
Just for a point of trivia, I installed QuickTime while working in LR. Not sure if that has anything to do with it, but restarting LR and creating a new catalog did not remedy the problem.
Suddenly after years of countless edits, I am no longer getting the version icon after saving. I have both 'Include in Organizer' and 'Save in Version Set with Original' checked, yet when I return to Organizer, I still see the original file. After countless F5 refreshes and hunting other possible fixes I looked in explorer and discovered 'edit_1'. 2, 3, 4, etc. Going to Organizer > Edit > 'Version Set' or 'Stack'
View 3 Replies View RelatedAnd before you say "It's because it's 14 years old", know that it was working perfectly until about two months ago.
I have a Windows 7 laptop with 4GB memory, plenty of HD space, and no other PC issues.
My Photoshop CS4 and CS5 shows "Photoshop has stopped working" . Whereas I have Windows 7 64bit, 6GB RAM, 512MB Graphics Card.
Earlier I worked in this version. But after formating my conputer I could not do anything with only in Photoshop. First I installed Photoshop CS4 it was failed to work then install Photoshop CS5..It also failed to work.
I updated Photoshop CC about 7 days ago. Before that it worked fine, since then I have been using Photoshop CS6 for some work (CC left it there when it installed) but yesterday I wanted to go to Photoshop CC from Lightroom 5.2 and Photoshop CC hung. Rebooted computer and tried to open Photoshop CC but it crashes on initialization.
As interim measure I installed PS CS6 as an optional external editor in Lightroom, but I would like to use Photoshop CC again one day!
Yesterday, I tried to start up Photoshop, but it got halfway through initializing and stopped, flashing a message: "Adobe Photoshop CS5.1 has stopped working." I shut down the computer and tried again, but it repeated three or four times.
So I uninstalled the program. Upon reinstallation, installation failed and the computer said: "Your installation encountered errors. Please try restarting your system and installing again. Exit Code: 20."
I have been using my program since June without issue. Suddenly it stopped working. I can open the program but it will not create a new file or open an existing file. If I "open with" from windows explorer it won't open either. I have uninstalled and reinstalled the program and I'm still not having any luck.
View 1 Replies View RelatedAfter installing X6 I get this problem...CorelDraw X6 (64-bit) has stopped working.
Problem signature:
Problem Event Name:APPCRASH
Application Name:CorelDRW.exe
Application Version:16.1.0.843
Application Timestamp:4fff8c8c
Fault Module Name:clr.dll
Fault Module Version:4.0.30319.261
Fault Module Timestamp:4ec9f666
Exception 80131506
Exception Offset:000000000040b383
OS Version:6.1.7601.2.1.0.768.3
Locale ID:7177
Additional Information 1:6d4f
Additional Information 2:6d4fcafc156cca63b72c0a4deac1b33d
Additional Information 3:844e
Additional Information 4:844ec7b1bf08d736261a9cce2c2795aa
I get an error message from windows vista premiumm home.
It just says: Adobe Photoshop CS3 has stopped working correctly. Windows will close the program and notify you if a solution is available. The only option is a box that says "close program". Once you close it everything goes away. It doesn't even give you a hint of what the problem could be. I installed creative suite 3 web premium on this brand new computer about 2 weeks ago. This is a first time install of this software, but when I called Adobe they said they don't offer free installation help anymore on cs3 because cs4 is out now. Anyone have a clue what I should do? I can't just uninstall photoshop, if I try it wants to uninstall all 8 programs.
I am working on a floor plan in CS5 Photoshop. Just basically tracing over an original document and erasing what I trace over. I do this all the time and it has been working fine.
But now the eraser won't work at all. When i turn off all the layers except the background layer I can erase things, but then when I turn the layers back on, it doesn't show up erased. I've tried resetting the tool and that didn't work. I'm so confused as to why it just stopped working.
i'm getting the error shown in subject. view details indicates problem with cooltype.dll. error started immediately after i activated a font in suitcase fusion 3. i was able to run photoshop 32bit to finish job. i deactivated font in suitcase and restarted computer. suitcase is not running but i still cannot run photoshop. what can i do to fix??
View 3 Replies View RelatedMy CS5 was working fine yesterday. Today, it abruptly stopped (error message states photoshop stopped working and must shut down.) I reopened both times and same thing happened.
View 4 Replies View RelatedDownloaded PS CS6 from Application Manager. Download and install seemed to go fine, but I can't start the program. Have downloaded and re-installed numerous times, and removed the previous installation before that.
My OS is Windows 7. I have had Adobe software installed, but removed (tried at least) everything when trying to get this work. Photoshop CS5 worked fine on this same setup. I get Windows error message when trying to start the program, and with problem details like this:
Problem signature:
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 13.0.0.0
Application Timestamp: 4f61beba
Fault Module Name: Photoshop.exe
Fault Module Version: 13.0.0.0
Fault Module Timestamp: 4f61beba
[code]....
I got 57,1 GB free space on drive C, where I've installed the program.
3D functionality has stopped working in Photoshop CC?
View 5 Replies View RelatedHad to replace the hard drive on my iMac. I use Time Capsule and when the new hard drive was installed had Time Capsule bring all my applications and files back. It seems to be working with all other files and apps.
But when I tried to use Photoshop CS 4 I received error message suggesting I restart the MAC which I did. Then got the same error message when I tried to open Photoshop. It said if restarting doesn't work go to Adobe.
I suspect the installation of Canon Pixma Printer software may have trashed Adobe components, is there an easy way to repair/reinstall just that part? I have the CS6 Master Collection and don't want to reinstall the whole shebang.
View 8 Replies View RelatedI am trying to run Photoshop CS5 on Windows 7 64bit. Everytime I open the program, I get an error saying "Adobe Photoshop CS5 has stopped working", immediately after the splash screen goes away and the main gui opens. The only option on the error is "Close Program".
I am on a computer with an i7 processor and 12GB of memory. I have two Nvidia GTS 250 video cards, running four monitors.
Over the course of the last day, I have reformatted my computer, and reinstalled Windows twice. I have reinstalled the CS5 Master Suite more times than I can remember. I have also downloaded and installed the latest video card drivers from Nvidia.
I continue to have the same problem every time I try to open any of the programs in the CS5 suite.The only time I have come close to getting it to work was immediately after installing the new Nvidia drivers, before restarting my computer. I was able to open it one time without it crashing, Once I restarted my computer, Photoshop continued to give me the same error every time I try to open it.
I have no other software installed on my computer. It is a brand new installation of Windows 7.I have been on the phone with Adobe technical suuport for about an hour and a half, and I have yet to get a single suggestion other than attempting an install with my network cable unplugged. Other than that, they seem to be fond of transfering me back and forth between departments (and asking me to repeat all of my information every time).