In our office we use autocad 2007 but in our architect office send us drawing on autocad 2012 version drawings we converted all drawings 2012 to 2007 autocad version with drawing true viewer... n than we work smartly..... but when i send drawings..architects office draftsmans open my autocad 2007 version drawings on autocad 2012 version and than show recovery message.. and than drawing close...
View 4 Replies
When I I convert a 2012 dwg into a 2007 format whether using true view or "saving as" 2007 from an open drawing, some of the graphics disappear. How do I convert withour losing these graphics?
View 1 Replies View RelatedWhen I open Inventor, the message "cannot load..." pop-out. Although I still can create the 3D model in Inventor but everytime when I open my existing or new drawing file (.idw), Inventor will occur fatal error and closed.
View 2 Replies View RelatedI have recently upgraded to ver 2012 from ver 2000. I have numerous macros that were written for the older version that I need to utilize in ver 2012. I manually recreated them in the new version by typing in the commands from ver 2000. As I expected I am getting errors when I try to run these macros in Ver 2012. The mlayer command, for example, does not work. I am pretty sure I need to use the -layer command and have tried this but I still get errors. While I am relatively proficient in ver 2000 I am having some trouble finding commands in ver 2012 that match the old version. Below is an example of a macro from ver 2000 as well as my attempt to rewrite it in ver 2012.
^C^C(mlayer "notes" "cyan" nil) -insert;B6;insert;;;;$S=NUMB0
my rewrite:
^C^C(-layer;m;"notes" "cyan" nil) -insert;B6;insert;;;;$S=NUMB0
I have a number of drawings which I believe were originally created in ACAD 2012 but have since been edited with ACAD 2007.
The drawings contain hatched areas. Within each hatched area is a MTEXT entity with background mask enabled within a rectangle. The idea is that the background mask on mtext wipes out the hatch below for legibility.
When opened in 2007 all mtext entities seems to be centred within the rectangle and the background mask fills the rectangle as intended (see below).
mtext 2007(2).png
When this same dwg file is opened with ACAD 2012 the mtext entities shift position and the size of the background mask is altered (see below).
mtext 2012(2).png
when opening a .iam file i get the Error:
FATAL ERROR: Schema Migration occurring without Schema Version change. Migration: RSeRevisionHistory Schema
Inventor 2012 Professional SP1 64-Bit
Windows 7 64-Bit
Can't seem to be able to Export to ACAD 2007 without the following appearing
Recover has found no errors, all XREFS have been bound and I've even exploded AEC objects
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
my user has AutoCAD Inventor 2010 and she wants to open a file created using AutoCAD 2007 but always failed with the error message that system running on low memory then Autocad will close. The file can be open without problem using AutoCAD 2007. I'd tried using a computer with Xeon Processor and 4 GB RAM but still facing the same problem so I guessed it's not the hardware problem. Is it a bug and how to solve it?
View 6 Replies View RelatedWhen opening the Layer Properties Manager in LT2007 I get a Fatal Error Unhandled e06d7363h exception at 75c09673h. How can I correct this problem?
View 4 Replies View Relatedusing Autocad 2007.
If I have drawing that was drawn in scale 1:1250 in model space but I want to show this in paper space as scale 1:500 the dwg will obviously be tiny. How do I change the scale in model space so that it can be presented in paper space fitting the page at scale 1:500 on size A1? Is there a calculation I need to change the model space dwg?
Can a 32 bit version of AutoCAD 2012 be installed on a 64 bit machine with windows 7 and a 64 bit version of AutoCAD 2012 on it? It is a network machine.
View 4 Replies View RelatedI need to know if by any means we can open dwf files in AutoCAD LT? I have 2012 version.
View 5 Replies View RelatedI am using Autocad LT 2012 on Windows XP at my office computer. I Save a file in an earlier version e.g. 2004 or 2007 and email to home computer, Autocad LT 2008 on Windows Vista. The file will not open. Message is that the file has been created by a later version. THis has not been my experience with earlier versions.
View 7 Replies View RelatedWiped my whole computer clean, reinstalled Windows 7, Can't reinstall Autocad 2012 student version.
Installation failed and this is the line from the log:
2013/8/1:13:30:28 carol HENRY Installing Microsoft Visual C++ 2008 SP1 Redistributable (x86): D:3rdPartyx86VCRedist2008SP1vcredist_x86.exe /q
2013/8/1:13:30:48 carol
error messages that say I can't use various functions because the file has objects from a newer version. I have ACA 2012 and the file is from ACA 2013.
Isn't there a way to convert or eliminate these 'objects' so I can use these files 'normally' in 2012 ACA?
I have an Nvidia Quadro FX1500 graphics card on XP64. Getting the correct video driver for ACA is critical as we all know. I did a search of the Adesk web site and one page told me to use version 259.57, while another page told me to use version 265.70.
The page telling me to use the newer driver was under the certified hardware page, where ACA is not a choice in the product used, only acad.The page telling me to use the older version was under the ACA support page.Then I go to the Nvidia web site and they tell me to use the 191.00 version.I'vehad a look nside the hardware XML installed with 2012 and te supported driver version is 6.14.0012.6570.
Having trouble with AutoCAD 2012 when saving to earlier versions? I can't save it down to any other version except for 2012, without the system crashing completely.
Also, from time to time we get the crash when editing MText.
The company I am working for has the old 2000 version of AutoCad. They send me drawings with blocks and attributes. But when I start working on them the system will lock up and not let me do anything else. I can maybe get two or three commands in then it will lock up. It doesn't even let me send a C.E.R. (customer error report) I have downloaded all of the service packs and the hot fixes but the problem persists. I don't where to go from here. My co worker thinks it may be a memory problem but I doubt it.
View 2 Replies View Relatedwhy few of the drawings processed in Autocad 2004 version and saved in autocad 2000 cannot be opened in different Autocad version such as 2012
View 6 Replies View RelatedI am opening a file from 2004 and I am using AutoCAD Arch 2012. When I open the file everything is there, but the doors do not cut through the walls. The doors are still there but are not "anchored". Is there a way to fix this easily? I also lost everything out of my door schedule. I know I will get my schedule back when the doors get anchored back to the wall.
View 1 Replies View RelatedI am doing a placement at company and they asked me to edit a drawing but i don't know how to convert or import the file.
View 2 Replies View RelatedCopied the printer configuration (pc3 and pmp) from AutoCAD 2013 to AutoCAD 2012. Plot the same drawing with that same printer configuration. With AutoCAD 2013, it plots out fine - page orientation landscape. In 2012, it plots out wrong. The orientation of the drawing is correct, but the paper is changed to portrait?
The plot setting are exactly the same in both versions.
I am the only one using C3D 2012 in our office and the other users are complaining that they cannot insert blocks or paste clipboard content into drawings that I have saved from C3D 2012. This is true whether I use "C3D as AutoCAD" or the full C3D functionality. I understand that the newer C3D objects are not compatible with the older version but to my knowledge there are no C3D objects included in the drawings in question.
C3D 2009 users can wblock the drawing contents from the Model tab and each Layout tab, and reassemble those parts. Then they are able to insert blocks and paste content again. It is a very inconvenient solution and we only use it when the situation is critical. It also breaks sheet view linkage to our Sheet Sets when we do the wblock fix.
I've asked the others to try using Design Center or Windows paste (CTRL+V) and see if that works the next time they encounter the problem. I don't have C3D 2009 installed or I would have tested these ideas already. The others will not install C3D 2012 and so far the owner's will not force them to.
I've made a logo and head for a business letter.
In PS i,ve typt tekst 2 cm from the left paper edge. The canvas size is equal to A4, and paper settings too.
When i print the image, ps comes with the messsage "The image is larger than the printable area, some clipping willl occur". And when th eimage is printed the text is less then 2 cm from the edge of the paper.
Last I checked, Arial was a default font and I have always had it on my system. It's still there too. Why is CS2 being wonky about this?
Every text layer has a little yellow triangle and harasses me about changing the font which if it does, I wouldn't know since it just changes it back to what I had before anyway.
knows the version of the Red Rocket driver/firmware supported in Smoke on Mac 2012?
View 1 Replies View Relatedi am trying to open a revit 2012 file in to revit 2013 but it is showing me an error thar says: There is a circular chain of references among the highlighted elements. and then this message: Data in this file is currupt and needs to be manually recoverd. but I can perfectly open the same file in revit 2012..
View 3 Replies View RelatedI have a strange problem with Max 2012. Scanline renderer is 10 times slower than 3ds max 2009. Why is that? All the settings are the same. Also, the rendered frame window is very slow too - when I pan around there is a horrible delay/stuttering whereas in Max 2009 I can pan around in real time.
View 5 Replies View RelatedHow can I open Max 2012 file in Max 2009 version software?
View 1 Replies View RelatedI found a way to solve in maya 2009, but it doesn't work in 2012.
I can't find Maya2012scriptsothersmentalrayCustomNodeClass.mel.
I have just purchased an Olympus OMD EM5. When I download images to Lightroom (v4.4) I have to manually convert to Process 2012. Am I doing something wrong? Why does this not happen automatically?
View 3 Replies View Related
