Maya :: How To Enable MR Production Node In Version 2012
Jan 5, 2012I found a way to solve in maya 2009, but it doesn't work in 2012.
I can't find Maya2012scriptsothersmentalrayCustomNodeClass.mel.
I found a way to solve in maya 2009, but it doesn't work in 2012.
I can't find Maya2012scriptsothersmentalrayCustomNodeClass.mel.
I have been transferring file between 2009 and 2010 version of autodesk inventor and all have gone hell, having a lot of freezup issues. recently i have got this message what does this means
"YOU are placing an educational version model into a production dataset. Educational version documents carry a watermark that is presented in all plotted or printed material containing this model. If you proceed, any subsequent plot or print of this document will contain that watermark. Do you accept the use of the watermark?"
I have recently upgraded to ver 2012 from ver 2000. I have numerous macros that were written for the older version that I need to utilize in ver 2012. I manually recreated them in the new version by typing in the commands from ver 2000. As I expected I am getting errors when I try to run these macros in Ver 2012. The mlayer command, for example, does not work. I am pretty sure I need to use the -layer command and have tried this but I still get errors. While I am relatively proficient in ver 2000 I am having some trouble finding commands in ver 2012 that match the old version. Below is an example of a macro from ver 2000 as well as my attempt to rewrite it in ver 2012.
^C^C(mlayer "notes" "cyan" nil) -insert;B6;insert;;;;$S=NUMB0
my rewrite:
^C^C(-layer;m;"notes" "cyan" nil) -insert;B6;insert;;;;$S=NUMB0
I tried starting Maya 2012 from the terminal and it started fine.Then it gave me this when I opened Hypershade libpng warning: Ignoring attempt to set cHRM RGB triangle with zero area...As soon as I made a mental ray node , in Hypershade , Maya crashed.And before crashing it spit this out
Qt has caught an exception thrown from an event handler. Throwing exceptions from an event handler is not supported in Qt. You must reimplement QApplication::notify() and catch all exceptions there.terminate called after throwing an instance of 'M2MI::ApiOutputError'maya encountered a fatal error
2012 Hypershade works fine on windows at my friends place. Do I need to upgrade my QT to the latest build ?
How am I supposed to render my scene with AmbOcc and SSS and all.
I am working in the Hypershade in Maya 2009. I need to see my place 2d texture nodes for my file textures.
Somehow they seem to have disappeared completely. There are no nodes in the utilities tab, and expanding the network to see inputs and outputs is not showing them either.
If there is a way to change the behavior of the middle mouse button in the Node Editor so that by default it moves the panel without needing to press the Alt key?
Ideally I'd like to swap the behavior of pressing the Alt Key + Middle Mouse with just the Middle Mouse.
We recently upgraded from 2008 to 2012. Sometimes, on saving a scene file, some of the meshes within a group node "disappear". They basically behave like they're on a hidden layer -- even though they're not. You can see the transform and shape nodes in the Outliner, but in the viewport they're gone.
I can fix this by un-parenting the missing meshes, at which point they reappear -- and then when I reparent them as children of the original group node they're fine. But when I save the file and reopen it, the meshes are (sometimes) invisible again.
You might think the group node itself is hidden or attached to a non-visible Display layer, but it isn't. And there are other meshes within the group node that show up fine.
How I can permanently avoid it? I'm working on fairly complex environment scenes, and having to selectively unparent/reparent meshes each time I open my files is a real hassle.
I’ve got a small issue when migrating an in-house Viewport Renderer plug-in from 2012 to 2013, when resetting a scene (for instance by creating a new scene or opening another one).
In 2012 version, when creating a new scene, a node removal callback was triggered on every node of the scene to clean things up. More precisely, by installing a callback this way: _callbackRemoveNodes = MDagMessage::addParentRemovedCallback( removeNodeCB, (void*)this );
the method removeNodeCB was called on each Dag path of my scene. Which was pretty interesting for me to clean a dual scene graph within my plug-in
In 2013 version however, none of these nodes removal callbacks are triggered on a scene reset (they are correctly triggered when manually removing a node of course).
Is there a new way to deal with scene resets in the API that I didn’t see or is this simply a bug I should report?This is a cross-post from the SDK forum. Since my issue is strongly bound to the 2013 version.
Suppose I have an asset containing three transforms:
-transform A with published attributes tx, ty and tz,
-transform B with published attributes rx, ry and rz, and
-transform C with no published attributes (nurbs sphere used for selection).
Is it possible to make it so that when the user clicks on the nurbs sphere, the actual asset node gets selected instead of the sphere? I seem unable to set it as the selection transform.
Can not find the menu location for the node editor???
View 8 Replies View RelatedHow to delete all ik handle nodes in a scene and all constrain nodes in a scene.
My rig is so complex that going in and deleting one by one seems like a crazy process but if there was a way to get the outliner to show only ik_handles and or constrain nodes then I could just select them and delete them and this would save me a lot of time.
Can a 32 bit version of AutoCAD 2012 be installed on a 64 bit machine with windows 7 and a 64 bit version of AutoCAD 2012 on it? It is a network machine.
View 4 Replies View RelatedI need to know if by any means we can open dwf files in AutoCAD LT? I have 2012 version.
View 5 Replies View RelatedWhen I I convert a 2012 dwg into a 2007 format whether using true view or "saving as" 2007 from an open drawing, some of the graphics disappear. How do I convert withour losing these graphics?
View 1 Replies View RelatedI am using Autocad LT 2012 on Windows XP at my office computer. I Save a file in an earlier version e.g. 2004 or 2007 and email to home computer, Autocad LT 2008 on Windows Vista. The file will not open. Message is that the file has been created by a later version. THis has not been my experience with earlier versions.
View 7 Replies View RelatedWiped my whole computer clean, reinstalled Windows 7, Can't reinstall Autocad 2012 student version.
Installation failed and this is the line from the log:
2013/8/1:13:30:28 carol HENRY Installing Microsoft Visual C++ 2008 SP1 Redistributable (x86): D:3rdPartyx86VCRedist2008SP1vcredist_x86.exe /q
2013/8/1:13:30:48 carol
knows the version of the Red Rocket driver/firmware supported in Smoke on Mac 2012?
View 1 Replies View Relatedi am trying to open a revit 2012 file in to revit 2013 but it is showing me an error thar says: There is a circular chain of references among the highlighted elements. and then this message: Data in this file is currupt and needs to be manually recoverd. but I can perfectly open the same file in revit 2012..
View 3 Replies View RelatedI have a strange problem with Max 2012. Scanline renderer is 10 times slower than 3ds max 2009. Why is that? All the settings are the same. Also, the rendered frame window is very slow too - when I pan around there is a horrible delay/stuttering whereas in Max 2009 I can pan around in real time.
View 5 Replies View RelatedHow can I open Max 2012 file in Max 2009 version software?
View 1 Replies View Relatederror messages that say I can't use various functions because the file has objects from a newer version. I have ACA 2012 and the file is from ACA 2013.
Isn't there a way to convert or eliminate these 'objects' so I can use these files 'normally' in 2012 ACA?
I have just purchased an Olympus OMD EM5. When I download images to Lightroom (v4.4) I have to manually convert to Process 2012. Am I doing something wrong? Why does this not happen automatically?
View 3 Replies View RelatedI can't open the saved files in MAYA 2012 in older versions of MAYA i.e. in 2008,2009,2010,2011..
View 9 Replies View RelatedI am new to the graphic modeling etc. world, coming from the C/Java programming world, and I would like to know which VCS do you recommend for Maya.
I haven't seen any way to work in group with it. I am accustomed to git, but it is not appropriated in this case, as doesn't track correctly binary files.
I know about non-distributed VCSs, like SVN. But before learning them, I considered a good choice to ask here how does usually people work with Maya in group, apart from zipping and emailing the projects.
I have an Nvidia Quadro FX1500 graphics card on XP64. Getting the correct video driver for ACA is critical as we all know. I did a search of the Adesk web site and one page told me to use version 259.57, while another page told me to use version 265.70.
The page telling me to use the newer driver was under the certified hardware page, where ACA is not a choice in the product used, only acad.The page telling me to use the older version was under the ACA support page.Then I go to the Nvidia web site and they tell me to use the 191.00 version.I'vehad a look nside the hardware XML installed with 2012 and te supported driver version is 6.14.0012.6570.
Having trouble with AutoCAD 2012 when saving to earlier versions? I can't save it down to any other version except for 2012, without the system crashing completely.
Also, from time to time we get the crash when editing MText.
In our office we use autocad 2007 but in our architect office send us drawing on autocad 2012 version drawings we converted all drawings 2012 to 2007 autocad version with drawing true viewer... n than we work smartly..... but when i send drawings..architects office draftsmans open my autocad 2007 version drawings on autocad 2012 version and than show recovery message.. and than drawing close...
View 4 Replies View RelatedThe issue that I am seeing is that BB 2012 is slower at rendering than BB 2008.
1. The server hardware is the same with no other changes other than upgrading to BB 2012. I uninstalled 2008.1 prior to the upgrade.
The company I am working for has the old 2000 version of AutoCad. They send me drawings with blocks and attributes. But when I start working on them the system will lock up and not let me do anything else. I can maybe get two or three commands in then it will lock up. It doesn't even let me send a C.E.R. (customer error report) I have downloaded all of the service packs and the hot fixes but the problem persists. I don't where to go from here. My co worker thinks it may be a memory problem but I doubt it.
View 2 Replies View Relatedwhy few of the drawings processed in Autocad 2004 version and saved in autocad 2000 cannot be opened in different Autocad version such as 2012
View 6 Replies View RelatedI am opening a file from 2004 and I am using AutoCAD Arch 2012. When I open the file everything is there, but the doors do not cut through the walls. The doors are still there but are not "anchored". Is there a way to fix this easily? I also lost everything out of my door schedule. I know I will get my schedule back when the doors get anchored back to the wall.
View 1 Replies View Related