3ds Max :: Open 2012 File In 2009 Version Software?
Jun 28, 2012How can I open Max 2012 file in Max 2009 version software?
View 1 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: 2012 Completely Disables Any Block Insertion Into 2009 Version
Jun 14, 2012I am the only one using C3D 2012 in our office and the other users are complaining that they cannot insert blocks or paste clipboard content into drawings that I have saved from C3D 2012. This is true whether I use "C3D as AutoCAD" or the full C3D functionality. I understand that the newer C3D objects are not compatible with the older version but to my knowledge there are no C3D objects included in the drawings in question.
C3D 2009 users can wblock the drawing contents from the Model tab and each Layout tab, and reassemble those parts. Then they are able to insert blocks and paste content again. It is a very inconvenient solution and we only use it when the situation is critical. It also breaks sheet view linkage to our Sheet Sets when we do the wblock fix.
I've asked the others to try using Design Center or Windows paste (CTRL+V) and see if that works the next time they encounter the problem. I don't have C3D 2009 installed or I would have tested these ideas already. The others will not install C3D 2012 and so far the owner's will not force them to.
AutoCAD Inventor :: Can Open 2012 Files On 2009
Oct 29, 2011can you open inventor pro 2012 files on inventor pro 2009?
View 2 Replies View RelatedAutoCAD Architecture :: Convert PDF Drawing File To DWG Using 2009 Version
Jun 4, 2013Is it possible to convert a pdf file created in Autocad back to it's original dwg format in Autocad?
View 2 Replies View RelatedAutoCAD Inventor :: Migrate 2009 File To 2012?
Oct 21, 2011What is the risk Migrating Inventor 2009 files to Inventor 2012?
Do i have to migrate the Inventor 2009 files to 2010 and up to 2012?
AutoCAD Architecture :: 2009 Crashes When Opening File Created In 2012?
Aug 13, 2012I work with a national company that creates criteria drawings for new projects. They recently changed to the 2012 version but they save it down to 2007. There has not been an issue with opening files with my 2009 version until recently. All of the computers in our office are unable to open these new files, although they claim nothing has changed. My CAD will pop up a fatal error and shut down whenever I attempt to open the new files. I downloaded the 2013 trial version and saved the file down to the older version, but that does not work either. Newer versions do not seem to be affected by the files, just my 2009 version. I tried creating a new file in 2013 and saved down to 2007 format. When I try to open it 2009 there is no issue. besides purchasing a new version of AutoCAD?
View 1 Replies View RelatedAutoCAD LT :: Open DWF Files In 2012 Version
Feb 29, 2012I need to know if by any means we can open dwf files in AutoCAD LT? I have 2012 version.
View 5 Replies View RelatedAutoCAD Inventor :: 2009 Unable To Open STP File?
Dec 10, 2013Using Inventor 2009. For some reason (all of a sudden) it will not open a step file. When I go to search for the file I would always use the file drop down an there would be a lengthy list of options. For some reason now it will only list the basic native formats... part, assembly etc. How I can get these back?
View 8 Replies View RelatedAutoCAD Inventor :: How To Open Higher Version File Into Lower Version
Jun 11, 2012I am unable open some part files and assebly files which are made in 2012 version. I have 2011 version.
View 2 Replies View RelatedAutoCad 2D :: System Variable Values Need Changes Each Time Open 2009 File
Jun 12, 2011in autocad 2010 & 2009 certain commands are not working, but if we change certain system variable values, it will work. but the problem is each time when we open the file, we have to change that system variable.
View 2 Replies View RelatedAutoCAD LT :: Save File In Earlier Version 2012
Nov 6, 2012I am using Autocad LT 2012 on Windows XP at my office computer. I Save a file in an earlier version e.g. 2004 or 2007 and email to home computer, Autocad LT 2008 on Windows Vista. The file will not open. Message is that the file has been created by a later version. THis has not been my experience with earlier versions.
View 7 Replies View RelatedRevit :: Opening 2012 File Into 2013 Version?
Jul 24, 2012i am trying to open a revit 2012 file in to revit 2013 but it is showing me an error thar says: There is a circular chain of references among the highlighted elements. and then this message: Data in this file is currupt and needs to be manually recoverd. but I can perfectly open the same file in revit 2012..
View 3 Replies View RelatedAutoCAD 2013 :: Changing STEP File So That It Works On 2012 Version
Jun 13, 2013I am doing a placement at company and they asked me to edit a drawing but i don't know how to convert or import the file.
View 2 Replies View RelatedAutoCAD LT :: Cannot Display DWG From 2009 On 2012
Jul 10, 2012A dwg obtained and developed from autocad 2009 was opened with autocad LT 2012 but could not display on the LAYOUT, although it does show on the MODEL.
I have tried to SAVE AS using the 2012 Autocad LT, but the drawing still wont display on the LAYOUT.
AutoCad :: Macro Commands From Version 2000 To Version 2012?
Nov 15, 2013I have recently upgraded to ver 2012 from ver 2000. I have numerous macros that were written for the older version that I need to utilize in ver 2012. I manually recreated them in the new version by typing in the commands from ver 2000. As I expected I am getting errors when I try to run these macros in Ver 2012. The mlayer command, for example, does not work. I am pretty sure I need to use the -layer command and have tried this but I still get errors. While I am relatively proficient in ver 2000 I am having some trouble finding commands in ver 2012 that match the old version. Below is an example of a macro from ver 2000 as well as my attempt to rewrite it in ver 2012.
^C^C(mlayer "notes" "cyan" nil) -insert;B6;insert;;;;$S=NUMB0
my rewrite:
^C^C(-layer;m;"notes" "cyan" nil) -insert;B6;insert;;;;$S=NUMB0
AutoCAD Civil 3D :: Copy Line-work From 2012 To 2009
Sep 26, 2012I go back and forth between older drawings in 2009 a lot while my current drawings are in Civil 3d 2012. Is there a way to copy linework from a Civil 3D drawing into my 2009 drawing easily. I used to be able to copy and paste between drawings but that doesn't work between these versions. Right now I have to wblock out the linework and open that new drawing and save as 2004 then import it into the old drawing.
View 1 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Script File To Open Multiple DWG File Not Working In 2012
Dec 22, 2011I am trying to make a script file to open a drawing and run a lisp routine. They both work independently just fine, the script file will open the all of the files fine... and the lisp is in the startup suite and works in all the files. But when I tell the script file to open the first drawing then run the lisp it hangs trying to open the next file after running the lisp. I have Filedia set to 0, but the message I get when it goes to open the next is "No canvas exists. click New Canvas." (And on top of that... Filedia even set back to 1 still does not display the Dialog box anymore, I have to shut down AutoCAD 2012 and start again then it works.) I Have tried several ways, Opening one at a time then run lisp, and open all files first and then try to run lisp (that closes the file after running) and try and run it again in the next... It will only run the lisp one time and then locks up from there.
View 7 Replies View RelatedAutoCAD Architecture :: Structural Members Not Displaying Correctly 2009 To 2012?
Aug 30, 2012We've just started using ACA 2012 and have noticed when importing files created in ACA 2009 that structural members do not display properly. We use the structural column or beam to represent a rainwater or soil pipe and are expecting to see a cut through at the cut plane and nothing else however we are getting a couple of lines that represent the crank in the pipe and I cannot turn them off. I'm sure that a setting has been introduced somewhere however after two weeks of looking I am still in the dark.
I've attached a file created in ACA 2009 that displays the problem in ACA 2012
AutoCAD Inventor :: Copy Self Made Material Database From 2009 To 2012?
Oct 31, 2011Ones every three years we have an upgrade of Inventor. In a few months we have an upgrade from Inventor Proffessionel 2009 to Inventor Prof. 2012. Since we often use special materials in our design process we also create/add the new material in the material database. So here's the question; is it possible to copy the material database (special mades) from Inv Pro 2009 to Inv Pro 2012? It would save us a lot of work!
View 4 Replies View RelatedPhotoshop :: Open File Created In Later PS6 Version
Jan 7, 2008I have been sent a file that when I try to open it, it says I don't have enough Ram. However, I have files far larger than this one (1.01 MB) which all open with no problems.
can my PS6 open files produced in later versions of PS?
Illustrator :: Open Old Freehand 9.0 File Into New Version?
Feb 12, 2014How can I open an old Freehand 9.0 file into the new Illustrator?
View 4 Replies View RelatedIllustrator :: Can't Open File (Newer Version)
Jan 2, 2014I have Creative Cloud Illustrator CS6 Version 16.2.0. I keep gettin a message saying The file can't be opened because it was generated in a newer Version of Illustrator. How can it be a newer version?
View 1 Replies View RelatedAutoCAD 2013 :: How To Import Mechanical Desktop 2009 Files Into Inventor 2012
Sep 23, 2013how to import Mechanical Desktop 2009 files into Inventor 2012
View 1 Replies View RelatedCorelDRAW Graphics Suite X5 :: Re-open Version X3 File
May 5, 2011I use Corel X5 and I don't have any problem.One of my suppliers use version X3.When I save files for this supplier, I saved them in version X3 format. But when he open the file, some graphics are missing.
I can't see where the problem come from. When I re-open the version X3 file with Corel X5, the file look fine and everything is there.The supplier keep saying that the problem is on my side. I asked him to upgrade to X5 as I think it should solve the problem.
CorelDRAW Graphics Suite X4 :: Won't Open AI Or EPS Version Of File
Oct 10, 2011I have a logo that was done for me but I would like to open it in Corel to do some tweaking but it won't open the ai or eps version of the file. I tried to post the file but its too big, If you can look at it send me a email at Hornnumb2 at Comcast dot Net and I will send it to you.
View 7 Replies View RelatedIllustrator :: Why Doesn't File Open In CC When Downsave It To CS5 Version
Nov 17, 2013When I open my illustrator file after working in CC, it won't open. I keep getting an error saying "could not read file because the plug-in could not understand this file."
View 1 Replies View RelatedRevit :: Can't Open File In 2012
Oct 9, 2012I had to work in Revit architect 2012 and today i have to open this file again. The program is show message is
Autodesk Revit Architect 2012
Buil : 20110916_2132(x64)
License unavailable. A license is required to run Autodesk Revit Architect 2012 on this computer.
But this file i have to tried to open in another machine is can open. Do i need to recovery my Revit program or re-install.
AutoCad :: 2012 - How To Open BXF File
Sep 30, 2011How can I open or export or inport BXF File in autocad 2012???
View 9 Replies View RelatedPhotoshop :: Double Click Should Open Image File By Version CS2 Not CS6
Sep 7, 2013Under Windows XP I've installed Photoshop CS2 and CS6 simultaneously, therefore two programs with the same name exist:
...Photoshop CS2photoshop.exe
...Photoshop CS6photoshop.exe
By double click I want to open a *.TIF image by Photoshop CS2 (for certain reasons). I know how to assign an execution program to a file type in Windows XP. Whatever I do – pointing to the CS2 version – the operating system reverts always to the CS6 version. The same problem for In Design and Illustrator.
AutoCad :: Open A Drawing File If Its Saved On Older Version?
Nov 20, 2011I just want to know how will I open a drawing file if its saved on an older version and I am using a latest version of autocad.
View 9 Replies View RelatedAfter Effects :: Any Option To Open Higher Version Of File (CS6 11.0.2) In Lower (CS5 10.5.1)?
Oct 18, 2013Is there any option to open higher version of file (CS6 11.0.2) in lower(CS5 10.5.1) ?
View 1 Replies View Related