I had to work in Revit architect 2012 and today i have to open this file again. The program is show message is
Autodesk Revit Architect 2012
Buil : 20110916_2132(x64)
License unavailable. A license is required to run Autodesk Revit Architect 2012 on this computer.
But this file i have to tried to open in another machine is can open. Do i need to recovery my Revit program or re-install.
I am trying to make a script file to open a drawing and run a lisp routine. They both work independently just fine, the script file will open the all of the files fine... and the lisp is in the startup suite and works in all the files. But when I tell the script file to open the first drawing then run the lisp it hangs trying to open the next file after running the lisp. I have Filedia set to 0, but the message I get when it goes to open the next is "No canvas exists. click New Canvas." (And on top of that... Filedia even set back to 1 still does not display the Dialog box anymore, I have to shut down AutoCAD 2012 and start again then it works.) I Have tried several ways, Opening one at a time then run lisp, and open all files first and then try to run lisp (that closes the file after running) and try and run it again in the next... It will only run the lisp one time and then locks up from there.
View 7 Replies View RelatedHow can I convert a .STP file into a DWG 2012?
View 3 Replies View RelatedI need to import a PDF file into Revit Architecture 2012 and/or AutoCAD Architecture 2012.
View 1 Replies View RelatedOften as a sole user of Revit when I open a project I have been working on I get the following message:
"This file is already open for editing by another user. You will be unable to save any changes before that user closes the file."
Since I am the only one working on the project there are no other users and as far as I can tell no other files open. Any insight into what has triggered this message?
my laptop has been stolen and I had to buy a new PC...The new one is a windows 8, therfore, I had to install revit 2014....the problem is that I have been working on a graduate class project using revit 2012, and now revit 2014 will not open the files I built on revit 2012...I have only 10 days to rebuild what I have been working on for 3 months!!!...is there any way to open a revit 2012 on 2014 or at least convert it to work on 2014.
View 1 Replies View RelatedThe help file says the keynote file should be located here- C:Documents and SettingsAll UsersApplication DataAutodesk<Revit release name><Imperial or Metric> Library Not happening. I'm in windows xp pro 64
View 3 Replies View RelatedI still have users using the old workflow (pre-2010) of creating local files by copying and pasting the central file from the server to their C drive and renaming the local copy. Is this workflow still supported in Revit 2012?
I have been suggesting to users to use the worksharing options in the open project browser, but sometimes for some people habits are hard to break, do I need to be concerned?
How can I open or export or inport BXF File in autocad 2012???
View 9 Replies View Relatedi am trying to open a revit 2012 file in to revit 2013 but it is showing me an error thar says: There is a circular chain of references among the highlighted elements. and then this message: Data in this file is currupt and needs to be manually recoverd. but I can perfectly open the same file in revit 2012..
View 3 Replies View RelatedI need a file called Curtain Wall Dbl Glass.rfa. It's missing in the Doors folder in my UK Fmaily Library in my software. I've found one on the web. I've copy/pasted it onto my Desktop. How do I now load it into my Revit project ?
View 1 Replies View RelatedEverytime I want to open idw file only in one folder, it comes with dwg and idwfiles. I have to identify the idw files from many dwg files, sometime I just opened dwg file due to the same name with the idw file. (For project purpose, I need to save idw and dwg file in the same folder).
I hope I can open idw files only as I choose to open iam and ipt only, and remove *.dwg from File of types (*.dwg; *.idw).
How do i open a SiteComp file .scj into C3D 2012?
View 8 Replies View RelatedHow can I open Max 2012 file in Max 2009 version software?
View 1 Replies View Relatedhow can i insert open street map file (osm) in autocad civil 3d 2012.
View 5 Replies View RelatedUsing AutoCAD 2012 SP2 on WinXP.
On a file server, when a folder permission has been set to "deny delete" we cannot navigate to that folder in the open file dialog box.
can 2012 open a flame 2013 file archive
View 2 Replies View RelatedI have a .rfa file, but I don't have Revit on the setup I'm using right now, is there any way to convert the .rfa file into a 3D DWG file that I can open in AutoCAD 2011?
The file is attached, any way to let me get a 3D DWG out of it.
With the AutoCAD Revit 2014 I am unable to open DWG file. It gives me a failed to open error. I have attached screen shot below. We did download DWG TruView 2014.
View 1 Replies View RelatedI need to open an older .rvt file I haven't opened for quite a while. Every time I try to open it I get a message that says "Data in the file "Crawford House 01.0030.rvt is corrupted and needs to be manually recovered. Please contacts Autodesk support." I have never had this issue.
View 1 Replies View RelatedIs it possible Apply on the lock file Not open to other systems?
View 1 Replies View RelatedOn my current project I get the error message "Software problem" when attempting to open the project file. This problem began last night and affects the project file and all automatic backup files of my current project. It does not seem to be affecting other projects.
how to recover this file?
1. Open IFC file ( made in Allplan ) in Revit
When converting an IFC file (which is created in All plan) components disappear from the model and some components ( not all ) get a other category assigned (not all floors together etc.). This is what happens in Revit 2013 but in Revit 2011 we did not have this problem.
Are there already improvements/solutions to work better with IFC files?The orange colored walls and the transparant floor ( V3 ) are invoked differently than the others.When I “bind” the IFC file now Revit makes the components disappear.
The Revit 2011 Navisworks Exporter plugin works fine for exporting files for Navisworks Manage (.nwc). The problem is that those files can't be opened in Navisworks freedom until they are converted to a .nwd file. Can the .nwd be generated directly from the plugin? Both NWD and NWC are shown in the Navisworks Options Editor for the plugin, but only a .nwc is generated.
View 5 Replies View RelatedOften when I open a project I ahve been woking on alone I get the following message:
"This file is already open for editing by another user. You will be unable to save any changes before that user closes the file."
Since I am working on the project alone there are no other users who could have the file open. I don't know why I'm getting this message.
Is it possible that i can save a revit 2013 drawing and open it in revit 2011 file?
View 2 Replies View RelatedUsing Revit 2014 LT. Trying to open a file created by another user/seat of Revit 2014 LT (trial version for now).
Error Message reads "The file is open for editing by another user. If you open the file, you cannot save changes until the user closes is. In this case, your changes will overwrite the user's changes. What do you want to do?"
The file is NOT open by another user though.
I realize LT does not allow worksharing, but I assumed that was multiple users working on the same file at the same time. We need to open files one at a time, but by different users.
We are working in revit server with two clients . recently we installed one more Lacal server and i checked the speed and all but whenever i try to open heavy file ( 300 Mb file ) from revit server it giving error after some time that server not responding and not open the file . but i checked 15 to 30 mb file it working in same server . Is their any size limitation in revit server . My internet speed is ok that time . So i think its related to revit server
View 5 Replies View RelatedI have a work set file which cannot open. A dialog box with 'Circular Chain of References' appears. When I expand the dialog box, the option to delete the errors are grayed out. They are issues to do with a floor plan, including a filled region and detail lines.
I have been working on this file everyday, so it's been saved and opened constantly, yet even the backed up files from over a week ago have the same error message. Even file which are detached from the central.
I have the student version of AutoCAD 2012 on an HP laptop with Windows 7 Home Premium OS. I originally installed AutoCAD in June of 2012. It worked fine for 9 or 10 months but now whenever I select File/Open, File/Save, or File/Save As, AutoCAD stops responding and the spinning blue donut appears. AutoCAD never comes back and I have to close it from Task Manager. I uninstalled AutoCAD and reinstalled it, and the process went smoothly. However I still have exactly the same problem with the File operations. I apply Windows updates, but other than that have not made any changes to the software on the laptop. AutoCAD works fine for everything except the File operations. I am able to save with CTL/S and am able to open AutoCAD files from File Manager.
View 3 Replies View RelatedI have autocad civil 3d 2008 in my pc. From last 2 days I got a different problem i.e. when I am selecting open / save command from File menu graphical file select explorer is not opening just message in the command window . Previously I used to select files using graphical file explorer.
View 6 Replies View Related