Revit :: Convert STP File Into DWG 2012?
May 16, 2012How can I convert a .STP file into a DWG 2012?
View 3 Replies
ADVERTISEMENT
Revit :: Can't Open File In 2012
Oct 9, 2012I had to work in Revit architect 2012 and today i have to open this file again. The program is show message is
Autodesk Revit Architect 2012
Buil : 20110916_2132(x64)
License unavailable. A license is required to run Autodesk Revit Architect 2012 on this computer.
But this file i have to tried to open in another machine is can open. Do i need to recovery my Revit program or re-install.
Revit :: Import PDF File Into Architecture 2012?
Oct 3, 2011I need to import a PDF file into Revit Architecture 2012 and/or AutoCAD Architecture 2012.
View 1 Replies View RelatedRevit :: Opening Project File In 2012?
Aug 11, 2011Often as a sole user of Revit when I open a project I have been working on I get the following message:
"This file is already open for editing by another user. You will be unable to save any changes before that user closes the file."
Since I am the only one working on the project there are no other users and as far as I can tell no other files open. Any insight into what has triggered this message?
Revit :: Opening 2012 File On 2014?
May 15, 2013my laptop has been stolen and I had to buy a new PC...The new one is a windows 8, therfore, I had to install revit 2014....the problem is that I have been working on a graduate class project using revit 2012, and now revit 2014 will not open the files I built on revit 2012...I have only 10 days to rebuild what I have been working on for 3 months!!!...is there any way to open a revit 2012 on 2014 or at least convert it to work on 2014.
View 1 Replies View RelatedRevit :: Can't Find Keynote File In 2012
Jun 22, 2012The help file says the keynote file should be located here- C:Documents and SettingsAll UsersApplication DataAutodesk<Revit release name><Imperial or Metric> Library Not happening. I'm in windows xp pro 64
View 3 Replies View RelatedRevit :: 2012 Local File Creation?
Jan 19, 2012I still have users using the old workflow (pre-2010) of creating local files by copying and pasting the central file from the server to their C drive and renaming the local copy. Is this workflow still supported in Revit 2012?
I have been suggesting to users to use the worksharing options in the open project browser, but sometimes for some people habits are hard to break, do I need to be concerned?
Revit :: Way To Convert 3D DWG To RVT File
Apr 17, 2013I've been doing some looking and can't find anything. It looks like you can't do it but is there a way to convert a 3D .dwg to an .rvt file?
View 1 Replies View RelatedRevit :: Opening 2012 File Into 2013 Version?
Jul 24, 2012i am trying to open a revit 2012 file in to revit 2013 but it is showing me an error thar says: There is a circular chain of references among the highlighted elements. and then this message: Data in this file is currupt and needs to be manually recoverd. but I can perfectly open the same file in revit 2012..
View 3 Replies View RelatedRevit :: Architecture 2012 Missing Family File?
Aug 19, 2012I need a file called Curtain Wall Dbl Glass.rfa. It's missing in the Doors folder in my UK Fmaily Library in my software. I've found one on the web. I've copy/pasted it onto my Desktop. How do I now load it into my Revit project ?
View 1 Replies View RelatedRevit :: Several Lines - How To Convert The Correct OBJ File
May 6, 2013There are manys lines appearing in the converted OBJ file:
vn -1.#QNAN0 -1.#QNAN0 -1.#QNAN0
So how can I convert the correct obj file?
Revit :: Convert Drawing File Into PDF Format?
Oct 20, 2010How to convert revit drawing file into a pdf format?
View 6 Replies View RelatedRevit :: Convert File (RFA) Thumbnail Preview To JPG / PNG Or Any Graphics Image
Sep 2, 2013How can we convert the file (Revit rfa files) thumbnail preview to jpg/png or any graphics image? We need this because we have huge number of rfa file and it will be converted to jpg/png etc. format. We have attached a sanp shot for your reference. We need the every item into individual image wise.
View 1 Replies View RelatedAutoCad :: Convert 2D Polyline Into 3D Using 2012?
Jun 28, 2012How to convert 2D polyline into 3D polyline using AUTOCAD 2012?
View 6 Replies View RelatedGIMP :: Convert PS USM Settings To (2012)
Apr 25, 2012convert the following Photoshop USM settings to Gimp? I want to use them in David's Batch Processor.
Amount: 85%
Radius: 1
Threshold: 4
AutoCAD Civil 3D :: Convert From 2013 To 2012
Jun 27, 2012Is there anyway to go back to 2012 once you've opened a file in 2013?
I would like to recover work done in 2013, at least the styles...
I've found out that I can export pipe networks to landxml and then import the file in 2012, but I have no styles if I do that...
Using Building Design Suite Ultimate 2014
GIMP :: Convert To CMYK Mode (2012)
Jun 18, 2012How do I convert to CMYK mode? It is a requirement for a banner I need to get printed.
I go to Image->Mode and select a CMYK profile but it just prints an error'Destinatin Profile is not for FGB color Space' when I press OK.
AutoCAD Inventor :: Convert 2013 Template To 2012?
Jan 24, 2013Is it possible to convert a 2013 drawing template (IDW) to 2012?
View 1 Replies View RelatedAutoCAD Civil 3D :: 2012 - Convert Exiting Blocks To Dynamic
Aug 25, 2013Taking existing blocks and converting them to dynamic blocks.? This will save a lot of time.
If this is not possible to do then where the instructions are for creating dynamic block in version 2012.
AutoCAD Inventor :: Convert 2012 View Scale From 0.5 To 1:2 Or Similar Within ILogic Rule?
Jul 2, 2012Is there a way to convert an Inventor 2012 view scale from "0.5" to "1:2" or similar within an iLogic rule? I can extract the main view scale and plug it into a variable but the format isn't correct for the drawings I'm creating.
View 2 Replies View RelatedRevit :: Labeling Parts In 2012?
Jun 10, 2011I wanted to know how people are labeling or taging the "parts" of their construction, like walls. I want to be able to tag the parts so that a description of the part is pulled from the material so a change to the material affects all lables and tags.
The 2 problems I am running into
1. in a 3D mode I cannot use a materials tag, and so have to rely on a Tag by Category, which limits me to the material name. I want to be able to refer to any of the properties in the material identity tag.
2. In a section or plan view, I can use a material tag, so I can refer to Description, Comments Keywords, etc, but the tags keep going blank and need to be "reloaded" anytime I change anything in the view. If I change the crop boundary, change from Show Parts to Show Original and return to Show Parts, change scale, anything; the tags return to ?. I have to select each tag and then click off of them for the parameters to be displayed; I feel like I am back in ADT with refresh and reload all.
Revit :: 2012 Rendering Stops At 26%?
Jun 18, 2012Rendering at high quality, exterior sun only, 150 DPI and the image is about 9' tall x5' wide. Everything goes great until it hits 26%. Then the bar goes full on 100% but the image is only 26% rendered.
I have a 2gb video card, 4.1Ghz overclocked processor and about 8GB of RAM. Perhaps I havn't allocated enough memory to render an image of this size?
Revit :: Transfer Projects From 2013 To 2012?
Sep 24, 2012I have recently been informed that my Revit 2013 is not compatible with the classes that I am taking. I have installed Revit 2012, but my projects cannot be opened in 2012. Is there a better or a way at all to transfer these projects?
View 2 Replies View RelatedRevit :: 2012 - Text Is All Jumbled Up In Status Bar
Jul 16, 2012Student had installed 2012 version and the text is all jumbled up in the status bar. He has been using the program though. On occasion, says he also sees it affecting option bar. See attached.
View 5 Replies View RelatedRevit :: Vanishing Material In 2012 Family?
Nov 20, 2012I built a basic facade system as a family in Revit 2012, but the materials won't stick. Every time I try to edit the family and assign a material, the material doesn't show up in the Revit file it's loaded into. Then, when I open the family back up to try editing it again, the material that I assigned to it five minutes ago is already reset to default, despite my saving and reloading it several times.
View 1 Replies View RelatedRevit :: Exporting Current View Only From 2012?
Sep 15, 2011I am trying to export part of a structural model to IFC but Revit is exporting the complete model. My file is from a consultant and is created in Revit Structure 2011, I am opening it with Revit 2012. The model contains ‘new’ and ‘existing’ phases which appear to be set up correctly.
I have tried a couple of different methods set up a 3D view and defined it by phase 'new only' so the existing is hidden, and tried to export with the “current view only” checked and uncheckedset up a 3D view and defined it by workset using visibility graphics, and again with the “current view only” checked and uncheckedEach time when I open the Model in Navisworks or Solibri everything is visible.Have tried this in both Struct and Arch with the same result, but I do not have the same issue if I open and export from Revit 2011 (arch) ?
Revit :: 2012 Quick Shifting Between 2D And 3D View
Jan 6, 2012I'm new to Revit and have a question about quickshifting between 2D og 3D view. I have managed to assign a hotkey for 3D view, but I can't figure out how to assign a hotkey for returning to the view I was in before the 3D view. I know that you can double click the level you want to go to, but I want to use the mouse as little as possible.
View 5 Replies View RelatedRevit :: Worksharing Monitor 2012 Not Working
Jul 20, 2011i want to use the Worksharing monitor with Revit Architecture 2012 SP1 64 bit (part of our building design suite premium), but when i load a workshering-enabled model (wich resides on our Revit server) the monitor stay's empty (stating that i should open a model in Revit)
View 2 Replies View RelatedRevit :: Upgraded 2012 Model Freezing
Oct 3, 2013I have a project with over 20 models that were all upgraded from Revit 2012 to Revit 2014. Once upgraded, I was able to reload all the Revit links and see these links in views, as I should. Later the same day, when opening a new local file, I am unable to open a view after loading a link without Revit freezing. Not crashing, but freezing... the application says "Not Responding", the memory allocation is unchanged in the Window's processes, and the journal file is no longer being written to. I thought maybe this is just taking a long time to process, but 1) it didn't take this long to open the view with the loaded link when it was first successful, and 2) I've left it for hours without change.
View 1 Replies View RelatedRevit :: 2012 - Exporting CAD DWGS Best Practices
Jul 26, 2012We are still on Revit 2012 and from my understanding, there were some improvements in the way Revit exports to CAD files. I'm sure most of you would agree that the export to AutoCAD feature is still a long way off. I wanted some opinions on my thoughts on how to minimize some of the errors that I recieve when I open the exported CAD files.
My problems really pertain to linetypes and hatch patterns. If I do not map any of the patterns to a standard AutoCAD linetype or hatch pattern file, then I get an error reading pattern message if I want to check out the pattern in AutoCAD. I am very inclined to wipeout all of the standard fill patterns and linestyles in Revit and make new ones based on the standard AutoCAD lines and hatches. Does this seem reasonable?
Revit :: 2012 FBX Export Doesn't Contain Materials?
Sep 6, 2011I recently tried exporting an FBX file from Revit 2012 in to another 3d software as well as the FBX converter. On both occassions, the materials don't show up, nor the textures.
View 1 Replies View Related