AutoCad :: MTEXT Shifts In Different Versions (2007 And 2012)
Nov 21, 2011
I have a number of drawings which I believe were originally created in ACAD 2012 but have since been edited with ACAD 2007.
The drawings contain hatched areas. Within each hatched area is a MTEXT entity with background mask enabled within a rectangle. The idea is that the background mask on mtext wipes out the hatch below for legibility.
When opened in 2007 all mtext entities seems to be centred within the rectangle and the background mask fills the rectangle as intended (see below).
mtext 2007(2).png
When this same dwg file is opened with ACAD 2012 the mtext entities shift position and the size of the background mask is altered (see below).
mtext 2012(2).png
View 5 Replies
ADVERTISEMENT
Jan 26, 2012
Sometimes when I import an image (such as a TIFF or pdf) and draw over top of it, when I print the stuff that I've drawn shifts. It will look fine on the screen and in print preview but shifts when printed.
View 2 Replies
View Related
Jun 25, 2013
I tried to set MSWord 2007 (WinWord.exe) as my mtext editor by setting MTEXTED to the path to the exe file. When I try to create MText. I get an error that MSWord can't find a TMP file in the folder I created to hold my temp and autosave files.
Civil 3D 2012 SP 3
Dell Precision T7400, Xeon CPU 3.16 GHz
Win 7 Pro, 64-bit,12 GB RAM, Nvidia Quadro FX 4600
View 4 Replies
View Related
Mar 23, 2012
When I I convert a 2012 dwg into a 2007 format whether using true view or "saving as" 2007 from an open drawing, some of the graphics disappear. How do I convert withour losing these graphics?
View 1 Replies
View Related
Jun 4, 2011
In our office we use autocad 2007 but in our architect office send us drawing on autocad 2012 version drawings we converted all drawings 2012 to 2007 autocad version with drawing true viewer... n than we work smartly..... but when i send drawings..architects office draftsmans open my autocad 2007 version drawings on autocad 2012 version and than show recovery message.. and than drawing close...
View 4 Replies
View Related
May 2, 2012
When I select a block that contains a multiline attribute my AutoCAD does not display the corner grips of the attribute if its location is "locked" in the block. Is there a setting I can change to show grips in 2012? Apparently a co-worker of mine that uses 2011 has grips when selecting the block.
If I unlock the location I have grips (not the same ones I am used to seeing from mtext though) but I do not want the attribute location unlocked..I was understanding that the multiline attribute was simply an attribute containing an mtext.
View 2 Replies
View Related
May 15, 2013
Can prior versions of inventor access current versions of vault?As in, can Inventor 2010 access vault 2013? Or does it have inventor 2013 and vault 2013?
View 2 Replies
View Related
Jan 31, 2012
I have multiple singular text objects on my screen and I want to convert them to mtext so I can use the Background Mask option within mtext on my drawing. how to quickly select all the text and convert it to mtext without it combinin ginto 1 mtext?
View 9 Replies
View Related
Apr 16, 2009
Tool to combine multiple pieces of Mtext into a single Mtext with paragraphs?
View 9 Replies
View Related
Jul 12, 2011
Why is this happening?
The dwg was fine, then it crashed while changing from modle space to paper space...
When i recovered the dwg, EVERY MTEXT I try to edit becomes rotated vertically and stays that way when i close the edit box...
I do not recall hitting any buttons or making any keystrokes without my knowing...
Is there a way to get my text back to Horizontal and stay that way?
I tried setting the MTEXTFIXED to: 0, 1 & 2.
NONE of these options changed anything.
I NEED to have this fixed. more importantly, i need to know why this is happening sop that i can take steps to prevent this happening in the future...
I am currently working with the latest CAD available.
View 7 Replies
View Related
May 21, 2013
I have numerous MText paragraphs that I need to combine into a single piece of MText. I want the paragraphs preserved in the final piece. I've found some routines that can combine pieces of MText but I don't know if they preserve the paragraphs.I have DotSoft Toolpac but it doesn't seem up to the task. C
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
View 9 Replies
View Related
Jun 1, 2007
Autocad Express Tools allows converting text to mtext. How would I be able to combine multiple mtext into a single mtext?
View 7 Replies
View Related
Sep 6, 2012
Doing a bend on diamond plate. I have applied a texture map to the side of the plate that has the diamond pattern. When the pattern gets in the corners (inside or outside), the texture map shifts. When it does this, the diamond pattern does not look the way the real part will. Below is an image of what I am seeing.
View 6 Replies
View Related
Apr 13, 2011
When I export to PDF some of my artistic text shifts about 2 cm. Most, if not all of this artistic text was previously imported into corel from PDF. I've tried a combination of settings in the export menu with no luck.
When I print to PDF I don't have this problem.
This is a very unfurtunate bug since I didn't realize this was happening until after our project was printed. Our work is technical and requires everything to be precise so it has caused us a lot of grief....
View 9 Replies
View Related
Oct 22, 2012
We are Fine Art Printers using PS4 on Windows XP and 7. Because we have to proof individual colors and individual areas we often have over 20 adjustment layers and masks on images greater than 1 meter square. The masks get hugely complicated and the images sizes are often well over 1GB.
Normally we would take a Snapshot(?) Shift+Ctrl+Alt+E as we get an area correct, then move on to proof the next. We have an image with dark blue/black cloud and noticed the image lost contrast and colors subtly changed when we did this. We have tried flattening layers, merging visible layers, merging down adjustment layers and even saving as a JPEG, but the colors change slightly each time layers are merged. A global change like Levels is not an option for fine art images. We need to simplify the images and reduce the memory used for printing.
View 6 Replies
View Related
Mar 1, 2013
For my work I use the Image Trace a lot. When I Image Trace something and then expand it, it shifts the art over. Every once in a while I wouldn't mind but it does it every time and I have to go back and nudge it back into place by setting the original layer as a template and then looking at it in Outline mode. Here is an example of the shift...
I never had this issue in any other version of Illustrator and I have been working with it since 8. When I have multiple items to Image Trace on one of my jobs and I Image Trace on each one individually, it does it in random directions. Sometimes down and to the right, sometimes up and to the left and sometimes it doesn't do it at all.
Here are the settings I am using...
I am image tracing 1200ppi bitmaps and I don't need it to be any more exact than it is now becuase I am then offsetting it .05" and using that as a relief for our products. But ignoring the shift would make one of our CNC machines mill through the art. Anything to stop "THE SHIFT" would be great. I am using up precious time in my pre-production schedule to be constantly doing this.
View 2 Replies
View Related
Feb 9, 2014
I have come across an odd issue! I have an object built and saved as an illustrator file, which has some knockout type (transparency). When I placed this object in another illustrator file, all is well, and I save this new file. When I reopen the new file, I noticed that illustrator has moved the placed object very slightly. I have looked at other placed files and objects in this new file and illustrator doesn't seem to affect those. Every time I resave the file, illustrator adds the same shift to the objects current position. If I just open the file without saving, the position stays as is. The shift is added by illustrator when I save the file!
what may be causing this issue and how to prevent it? (I suspect it might have to do with the knockouts but I can't figure it out).
This is in CS4. T
PS: Another strange thing is that when I tried to save the object-with-knockout as an EPS file from illustrator, the EPS file discarded the transparency.
View 15 Replies
View Related
Sep 27, 2012
I noticed that if i draw a very short line (about 10 pixels or less) then cursor shifts back to starting point.
Tested on systems an drivers:
Mac OS X 10.6.4 or 10.7.4
Driver 6.3.0 or 6.3.3-3
Photoshop CS 5 (12.0.4)
Photoshop CS 5.5 (12.1)
Mac OS X 10.8.2, Driver 6.3.3-3 and Photoshop 6 (13.0.1) - same problem.
I have three Intuos 5 tablets for now and all have this bug so this is not a hardware problem i think. Corel Painter 12 - all good.
View 2 Replies
View Related
Jul 7, 2012
Having discovered the problem in a more complex scenario, I've narrowed down to a simple set of jpg images placed sequentially in a video group, and exported as an h.264 video from Photoshop PS6. All is on Windows 7 Professional SP1, all software involved completely up-to-date.
I first noticed the gamma shift using the 'High Quality' preset. It occurs with variations on Vimeo 29.97 and Youtube 29.97 presets. The gamma problem does not occur on HD 720p or 1080p 29.97 presets.
When I view the resulting video through Quicktime, I see a gamma shift for a moment on the first image, making it look washed out. After another moment, the gamma goes back to normal. On other players such as Windows Media or VLC, no such shift is visible.
Interestingly, the shift comes at 1 second when exporting to the Vimeo 29.97 preset, or 'High Quality', while at 3 seconds on Youtube 29.97. Similarly, the shift back occurs at 2 seconds, or 6 seconds for Youtube.
What the gamma shift looks like sounds like the now age-old Apple Quicktime fault on h.264. -- except it occurs only for one or a few seconds, then reverts to proper gamma, instead of continuing..
With the simple setup of single image (jpg) sequence, it occurs only on the first image. With a more complex scenario, some actual videos included, I've seen it occur on every jpg -- or on some -- in a sequence.
This is very repeatable here - 100%.
View 2 Replies
View Related
Aug 13, 2012
I have found that when I Publish, the drawing comes out shifted about 1/8" down and 1/8" left as compared to when I use Plot. Which of course is just enough to cut off the sheet border which is 1/2" from the paper edge. I am using the same Page Setup for both Publish and Plot, same drawing.
This is to an Oce TDS600, and it only happens with 15x21 paper size. All paper sizes are set to 0" border. Probably an Oce issue, but have any of you seen this before?
View 1 Replies
View Related
Mar 14, 2011
I am creating a mask in Photo Paint and feathering the edges. Everything works fine up until I "Finish Editing" and the object is returned to Corel Draw. The mask has shifted up from the image and the wrong area is masked. If I save the image from Photo Paint and re-open it it's fine...just not when it's sent back to Corel Draw.
View 5 Replies
View Related
Aug 16, 2013
the procedure for adding a new printer to my Autocad 2000, or 2007.
View 5 Replies
View Related
Jan 4, 2012
I can not open CAD LT 2007 at all. I uninstalled and reinstalled. Still will not open. When I try to open existing files. I get an error message stating that the file can not be found or the file name is misspelled. I have run this very program for many years with out any problems. Now I can not acsess if in any way.
View 5 Replies
View Related
Aug 24, 2011
Autocad map 2007 has not opening in WIN7 OS. I had changed the compatibility settings to WindowsXPsp3, and then it has opened in Administrator login only. Other users couldn’t get the map07. When they click the run the program prompt, there is no response.
View 8 Replies
View Related
Oct 16, 2011
I have attempted to import a jpeg file into my current drawing, using the simple copy paste method, Insert> Raster image and Insert > External References, however the image is not appearing in my drawing or plot at all, though the command bar is doing it's thing.
View 1 Replies
View Related
Feb 11, 2013
im doing both isometric view and top view of a floor plan in a single paper at the same time.
the problem is ..when i change the view to isometric.. the drawing that is intended for top view changes to isometric view also..
how can i change the view of a single object to isometric isolatedly,, without affecting the other drawings and remain in its current position?
btw im using autocad 2007.
View 6 Replies
View Related
Jan 13, 2009
using Autocad 2007.
If I have drawing that was drawn in scale 1:1250 in model space but I want to show this in paper space as scale 1:500 the dwg will obviously be tiny. How do I change the scale in model space so that it can be presented in paper space fitting the page at scale 1:500 on size A1? Is there a calculation I need to change the model space dwg?
View 9 Replies
View Related
Aug 12, 2012
I am using Autocad 2007 and when I want to select something by outlining it, the area that I outline turns a green color. Is there a way to toggle this feature off so that it does not change color, as in v 2000? Incidentally, what is this feature called?
View 2 Replies
View Related
Apr 1, 2011
how to draw a drill bit in Auto CAD 2007?
View 7 Replies
View Related
Aug 3, 2012
I kept getting a fatal error when I tried to open the layers manager and I found a discussion board saying I had to do a system restore to fix the problem. Well I did a system restore and now autocad won't even load. I click on the icon and the hour glass goes but then it disappers and nothing happens. I have windows 7 if that makes a difference. I have been using 2007 lt for a few months now and everything worked fine.
View 4 Replies
View Related
Oct 12, 2009
I have just recently started experiencing printing problems to my HP Designjet T1100 with 2007 LT. This issue started about a 2 weeks ago. When trying to print out a large scale drawing it terminates about 1/4 of the way through the print. There are no errors on the printer or in the print manager.
To date I have uninstalled and reinstalled 2007 LT; updated the printer firmware; updated the printer software driver.
View 5 Replies
View Related