Photoshop :: Cursor Shifts Back To Starting Point
Sep 27, 2012
I noticed that if i draw a very short line (about 10 pixels or less) then cursor shifts back to starting point.
Tested on systems an drivers:
Mac OS X 10.6.4 or 10.7.4
Driver 6.3.0 or 6.3.3-3
Photoshop CS 5 (12.0.4)
Photoshop CS 5.5 (12.1)
Mac OS X 10.8.2, Driver 6.3.3-3 and Photoshop 6 (13.0.1) - same problem.
I have three Intuos 5 tablets for now and all have this bug so this is not a hardware problem i think. Corel Painter 12 - all good.
View 2 Replies
ADVERTISEMENT
Aug 16, 2011
I need to design a walking track 1 mile (5280 feet) from a starting point and finishing at the same point. I need to go around buildings, ponds, etc. What is the best way to tackle this? I thought about 16 splines at 330', but as soon as the spline is moved the distance changes.
View 2 Replies
View Related
Oct 9, 2013
I would like to draw a Zig Zag Line, but I want that the line start in point "A" and finish in point "B".
The image below is similar to how I want the line, but I would like to have that "wavy" style. I use Illustrator CS6.
View 3 Replies
View Related
Sep 1, 2013
How to choose my starting point to be relative to another point without drawing help lines (which mean they must be drawn, selected, deleted = time).
For argument's sake, consider I am attempting to draw a cross. I use the line command, input a starting point; choose next point: @100<0 (to draw a line 100 units in length at an angle 0 [relative to X axis] relative to previous point).
Now I need a vertical line of equal length to cross the middle-point of the horizontal one.
I could snap to middle-point, draw a line of half-length at angle 90 and draw another of 2.(length) at angle -90. This produces 2 lines one of which is unwanted must therefore be selected and deleted.
This simple example illustrates my point.
I need a command which allows me to choose my first point (for the LINE command) as the point which is "X" units at angle "alpha" relative to a point "x,y" (or a coordinate selected by the SNAP tool if you will).
View 9 Replies
View Related
Jul 16, 2013
When I have been drawing things I often want to start drawing from an existing line but not on an existing node/end point/mid point etc. For example I need to draw a support collumn on a wall 20' from a corner, but everytime I start it will snap to the nearest endpoint or midpoint.
A similar problem is if I am trying to draw a rectangle that is centered on the midpoint of another object. The rectangle tool will snap to the midpoint and the placement will be off by 1/2 the width of the rectangle.
This is not an osnap issue, but more of a best drawing practices question. In the past I have used DIMLIN to create a node to snap my starting point to, or drawn a new line out to the point where I want to start. I don't like doing this because then I have to erase it later(just to keep the drawing tidy).
View 5 Replies
View Related
Aug 17, 2011
I have a VBA to insert a block I ask the user for an insertion point GETPOINT. Then I allow the user to select an angle. GETANGLE starting with the insertion point. If the user picks a point or enters a number there is no problem.
However if the user hits enter it crashes saying invalid input. What I want to happen that if enter happens it accepts it as an angle of 0.
View 3 Replies
View Related
Jan 4, 2013
When trying to draw a line and choose a starting point, autocad decides that this is wrong and start the line in a different place. I've turned of autosnap and autotrack but this dosen't work.
What is it that I've forgot to turn off?
View 9 Replies
View Related
Jan 29, 2014
I have had this problem since I started using patterns. Basically when I put a pattern on a path I want to then move it along that path so it starts where I want it to start, not neccessarily on the path's starting point.
There is an image of how it looks like
I created a simple pattern to show my issue. For example I want to move this pattern along this circle so it looks like this (triangle points up)
As you can see I rotated the whole circle to get the right outcome I need, but if it was just a regular path I would not be able to fix it this way.
Is there a way to do that? Something like moving text along a path.
I am using Illustrator CC.
View 7 Replies
View Related
Jun 19, 2013
I do aerial photography with a large rc helicopter. Camera movement is hard to get rid of. I am looking forward to the upgraded Warp stabilizer "VFX" to work with that. I have been using the Warp in AE and motion tracking. I just don't know how to launch the multi point program in AE cloud.
View 1 Replies
View Related
Jul 30, 2013
I am using photoshop. the icon for cloning is a circle...it changes to a cross. i need to use the circle. how do i get it back
View 1 Replies
View Related
Sep 14, 2013
The cursor on Elements has changed from an arrow to a fine orizontal bar with arrows at each end and is proving virtually unusable. How i can get the original white arrow back?
View 2 Replies
View Related
Mar 19, 2013
I want it to be a variable stroke, so I loaded up “Width Profile 2” in the profiles. The trouble I am having, is that Illustrator defaults to start the larger dots in the bottom right hand corner, and I would like the “starting point” to be in the middle of the line if you know what I mean. I'm still happy for the dots to start big, then gradually decrease in size, but I want to control where the “beginning” is.
View 2 Replies
View Related
May 28, 2013
How can I change my clone stamp brush cursor from a cross back to a circle?
View 3 Replies
View Related
Jan 20, 2013
It's like the anchor point for the cursor is way off. I can click paint brush, and the paint will show up halfway across the page. If I keep clicking, the painted spot will finally show up under the cursor and I draw. If I move the cursor, and start again, same problem. If I enter text, the text willl appear so far below the picture, I have to zoom out so far, the the picture is a very small square. I grab the text box and move it back up to the picture, zoom back in and finish. If there is more text, I just duplcate the layer, so I don't have to go through the drill again.
Example: [URL] .....
Same problem with drawing a line. I click on the start point, and the line draws itself, off page to the left: [URL] ......
My video drivers are up to date, I'm working in Win 7 and CS5
View 1 Replies
View Related
Dec 13, 2012
I have downloaded the above update 3 times and no matter what i do , including "run as administrator" not a lot happens when i double click the .exe file.I get the waiting cursor but then the cursor just changes back to the normal pointer.
Win Vista 32 bit Business , all updates installed .
View 9 Replies
View Related
Feb 7, 2014
When I am working on an image, for some reason SOMETIMES, the cursor vanishes and all I will see is different elements momentarily highlighting but not enough to do anything in LR. pressing ESC gets me out of the module and somehow I have to exit the program...restart to get it back to normal again...
View 13 Replies
View Related
Sep 16, 2013
When I am working on an image, for some reason SOMETIMES, the cursor vanishes and all I will see is different elements momentarily highlighting but not enough to do anything in LR. pressing ESC gets me out of the module and somehow I have to exit the program...restart to get it back to normal again...
View 1 Replies
View Related
Dec 4, 2012
Is there any way to dig through the discreet folders and possible find the new cursor icon and replace it with the old one? I found a flame artist who could change his batch and action nodes, If he could do this it shouldn't be to hard to change just the cursor, right?
View 3 Replies
View Related
Apr 3, 2014
I'm not new to lightroom. In every photo I go in to edit with the tools (any of them/all of them) my cursor only appears as the tool along the edge of my workspace. Once I move the cursor into about a half inch (on the computer screen) into the workspace my cursor becomes an arrow again, not allowing me to edit except for on the edges. I mean, I can drag the portion of the picture into the area in the workspace that allows my cursor to function as a tool, but this is not easy nor is it preferable in any way.
View 1 Replies
View Related
Aug 1, 2013
I have a layer I'm resizing and is currently in Transform.When I beging to drag the layer to position while it is in resize the center reference point will jump to my mouse causing me to move the reference point outside of the tranform layer. Normally I would have to click on the reference point and drag it intentionally or hold CTRL and click in the transformed layer to set a reference point, but it since CS6 is had still remainded in CC.
This happens when I transform the layer (Ctrl+T) and then grab the layer to move. I have to put the reference point back to center via mouse or by the reference point on the menu bar up top. Then I can go back and drag my later where I need it to finish my transform.
View 2 Replies
View Related
Jun 25, 2013
I've just 'upgraded' to CC, and noticed that actions that alter Curves adjustment layers do not play back correctly.The Action itself contains the correct steps ... here's an example.. but it refuses to play this type of step in any Action, giving me the default, flat curve, thus ...I've an extensive set of Actions of this type for photo-processing: I take it that these are now pretty useless in PSD CC?
View 9 Replies
View Related
Mar 9, 2014
may have accidentally set Premiere Pro so that every out point I set, it advances 5 frames ahead, making it very frustrating to make cuts at precise points. There is now a dashed orange line next to the cursor. I can't find the setting to disable this.
Here is an example of what it looks like in the timeline:
View 6 Replies
View Related
Nov 8, 2012
I draw a line, then draw another. How do I go back and modify the first line, color, end point, etc.? What obvious click am I missing?
View 4 Replies
View Related
Oct 22, 2012
We are Fine Art Printers using PS4 on Windows XP and 7. Because we have to proof individual colors and individual areas we often have over 20 adjustment layers and masks on images greater than 1 meter square. The masks get hugely complicated and the images sizes are often well over 1GB.
Normally we would take a Snapshot(?) Shift+Ctrl+Alt+E as we get an area correct, then move on to proof the next. We have an image with dark blue/black cloud and noticed the image lost contrast and colors subtly changed when we did this. We have tried flattening layers, merging visible layers, merging down adjustment layers and even saving as a JPEG, but the colors change slightly each time layers are merged. A global change like Levels is not an option for fine art images. We need to simplify the images and reduce the memory used for printing.
View 6 Replies
View Related
Jul 7, 2012
Having discovered the problem in a more complex scenario, I've narrowed down to a simple set of jpg images placed sequentially in a video group, and exported as an h.264 video from Photoshop PS6. All is on Windows 7 Professional SP1, all software involved completely up-to-date.
I first noticed the gamma shift using the 'High Quality' preset. It occurs with variations on Vimeo 29.97 and Youtube 29.97 presets. The gamma problem does not occur on HD 720p or 1080p 29.97 presets.
When I view the resulting video through Quicktime, I see a gamma shift for a moment on the first image, making it look washed out. After another moment, the gamma goes back to normal. On other players such as Windows Media or VLC, no such shift is visible.
Interestingly, the shift comes at 1 second when exporting to the Vimeo 29.97 preset, or 'High Quality', while at 3 seconds on Youtube 29.97. Similarly, the shift back occurs at 2 seconds, or 6 seconds for Youtube.
What the gamma shift looks like sounds like the now age-old Apple Quicktime fault on h.264. -- except it occurs only for one or a few seconds, then reverts to proper gamma, instead of continuing..
With the simple setup of single image (jpg) sequence, it occurs only on the first image. With a more complex scenario, some actual videos included, I've seen it occur on every jpg -- or on some -- in a sequence.
This is very repeatable here - 100%.
View 2 Replies
View Related
Feb 11, 2014
I'm using AI CC now, but I noticed this problem in earlier versions of AI: If I want to place a one-word label on an illustration I move the type insertion cursor to a speific point on the screen image and click, but then the flashing insertion point, where the label will actually start, pops up elsewhere, usually a line or two above where the cursor was, and a pica or two to the left, forcing me to type the label, then move it into position rather than simply typing it in the right place and moving on. The problem is merely annoying, but I'd like to fix it. It's probably a matter of ignorance-I simply haven't read the right documentation, but I don't know what to call the problem. Where can I find out how to change the position of the cursor relative to the insertion point?
View 2 Replies
View Related
Apr 13, 2011
When I export to PDF some of my artistic text shifts about 2 cm. Most, if not all of this artistic text was previously imported into corel from PDF. I've tried a combination of settings in the export menu with no luck.
When I print to PDF I don't have this problem.
This is a very unfurtunate bug since I didn't realize this was happening until after our project was printed. Our work is technical and requires everything to be precise so it has caused us a lot of grief....
View 9 Replies
View Related
Jan 26, 2012
Sometimes when I import an image (such as a TIFF or pdf) and draw over top of it, when I print the stuff that I've drawn shifts. It will look fine on the screen and in print preview but shifts when printed.
View 2 Replies
View Related
Mar 1, 2013
For my work I use the Image Trace a lot. When I Image Trace something and then expand it, it shifts the art over. Every once in a while I wouldn't mind but it does it every time and I have to go back and nudge it back into place by setting the original layer as a template and then looking at it in Outline mode. Here is an example of the shift...
I never had this issue in any other version of Illustrator and I have been working with it since 8. When I have multiple items to Image Trace on one of my jobs and I Image Trace on each one individually, it does it in random directions. Sometimes down and to the right, sometimes up and to the left and sometimes it doesn't do it at all.
Here are the settings I am using...
I am image tracing 1200ppi bitmaps and I don't need it to be any more exact than it is now becuase I am then offsetting it .05" and using that as a relief for our products. But ignoring the shift would make one of our CNC machines mill through the art. Anything to stop "THE SHIFT" would be great. I am using up precious time in my pre-production schedule to be constantly doing this.
View 2 Replies
View Related
Feb 9, 2014
I have come across an odd issue! I have an object built and saved as an illustrator file, which has some knockout type (transparency). When I placed this object in another illustrator file, all is well, and I save this new file. When I reopen the new file, I noticed that illustrator has moved the placed object very slightly. I have looked at other placed files and objects in this new file and illustrator doesn't seem to affect those. Every time I resave the file, illustrator adds the same shift to the objects current position. If I just open the file without saving, the position stays as is. The shift is added by illustrator when I save the file!
what may be causing this issue and how to prevent it? (I suspect it might have to do with the knockouts but I can't figure it out).
This is in CS4. T
PS: Another strange thing is that when I tried to save the object-with-knockout as an EPS file from illustrator, the EPS file discarded the transparency.
View 15 Replies
View Related
Nov 21, 2011
I have a number of drawings which I believe were originally created in ACAD 2012 but have since been edited with ACAD 2007.
The drawings contain hatched areas. Within each hatched area is a MTEXT entity with background mask enabled within a rectangle. The idea is that the background mask on mtext wipes out the hatch below for legibility.
When opened in 2007 all mtext entities seems to be centred within the rectangle and the background mask fills the rectangle as intended (see below).
mtext 2007(2).png
When this same dwg file is opened with ACAD 2012 the mtext entities shift position and the size of the background mask is altered (see below).
mtext 2012(2).png
View 5 Replies
View Related
