may have accidentally set Premiere Pro so that every out point I set, it advances 5 frames ahead, making it very frustrating to make cuts at precise points. There is now a dashed orange line next to the cursor. I can't find the setting to disable this.
Here is an example of what it looks like in the timeline:
I have just started using the multicam since upgrading to 7.1. Apparently I have got a 2 hour sequence with only two cameras all HDV footage. After about an hour of my live cuts, I started noticing slight freeze of about a second or so when I cut to a camera. I tried this with the mouse and the keyboard and still the same.
I am running Windows 7 Pro 64 bit,
HP XW6600
Dual Xeon 5450 @ 3Ghz
GTX 570
16GB RAM
I need to find a way how to insert a point or a * on the center point of a hole and put it on a different layer. The reason for this is - I am a CAD tech for a welding shop and we cut parts out of steel and we use the dxf file format for our plasma table to cut parts. For example : if i have a 1 inch thick plate and want to put a 3/4'' hole in the plate the hole will be distorted because the hole is smaller than the material thickness. For these situation we can use the plasma table to burn a point or a dot on the center point of the hole. But to do this the point or dot must be on a different layer in the dxf.
View 2 Replies View RelatedJust dipping my toe into Premier Pro, I have to stitch together 1000 pictures from a time lapse photo shoot. I can import and change the time for a batch of frames, but it leaves gaps between each frame. Is there a simple way to make all frame snap together?
View 5 Replies View RelatedIf I have a 10 frames long clip and a 20 frames long clip for compositing, and with those clips, I wanna set the 10 frames long clip moved 5 frames in Action, How can I do it without Slip and Transparency options? I tried to find the way from Animation tap, but I could not.
View 3 Replies View RelatedI have a video shot on a webcam on 720 resolution and 15 frames per second. When I import it into premier I can't find a 720 setting at 15 frames.
View 10 Replies View RelatedEdited my footage in a sequence in normal size.
I wanted to make it widescreen, so I made a new sequence in 1920x810.
I then copy pasted my edit into the new sequence and started rendering.
The render window kept adding frames to render, and the percentage jumps and very slowly adds 0.1% into the progress.
I tried choosing a smaller amount to render, same problem still persists.
Why does it now want to render normally? Why does it add frames to render all the time?
there i wanted to know a method to control my view frames range or how to do so in the sheets ,
as per attachment i get the Profile view , out of frame
Yeah Will Not that much :
Sony VPCCW26FA
Intel Core i5 M 520 @ 2.40GHz
8192MB RAM
NVIDIA GeForce GT 330M 512MB Dedicated
Using the Copy(multiple) command button with the following sequence (working correctly): Copy command, window objects to copy, right click to close selection, pick base point,
pick new location point(s),...right click to close the command.But sometimes it decides to do this: Using the same Copy(multiple) command button with the following sequence (not working correctly):
Copy command, window objects to copy, right click to close selection, pick base point..At this point the copy comand closes out. It has assumed a single copy, 0,0,0 base point
& tossed the copied objects out in model space accordingly. But as stated it only does this periodically.
I have been attempting to export a video from both Premiere and Media encoder in the H.264 codec and it continually discards the final few seconds of black frames. I have tried placing black video there, but it doesn't make a difference.
View 6 Replies View RelatedI've recently started using Premiere Pro CC on Win7 and noticed that when I apply color changes via Fast Color Corrector (or others) that some video frames don't get the correction. It's an odd thing that I don't see in Final Cut Pro X which I use on a slower Mac. No errors or any other inconsistencies appear and sometimes it's 1 - 2 uncorrected frames scattered here and there or it may be more or larger groups. I suspect it may be some simple setting that I've missed but can't seem to find it. Here's an example. [URL]...
Windows 7 Pro
32 gig RAM
250GB SSD
i have cc 7.2.1, and every basic operation i do on the timeline , moving clips, trimiming, scrubing on the timeline everything lags, its not fluid. When i do a simple scrubring on the timeline, the CTI takes sometime to get to the position i selected to do the playback.
But the worst part is the trimming or moving clips, it takes ages before i get an image on the program monitor. If i move a clip into a middle of 2 clips it takes ages to see those two little privews images with timecode, to see where to put it. So is very hard to edit like this.
Another odd thing is when in redering mode i select to use sofware only i dont have drop frames, when i chose cuda i have drop frames!!
I´m editing h254 from a 5d and 7d on externa llaccie usb 3 , have the a macbookpro 16g i7, iris pro and nvidia 750m, and a external samsung, via DVI.
I am burning DVDs from an hour long project file in ProX5, of a two act opera. Act I burned fine, but Act II which is a separate project comes out on the DVD with the audio ahead of the video. I am making coasters, have quite a collection. I've never had this problem before with burning DVDs. I have burn speed set to 16x, not maximum. In the past I normally use the project rendered to a movie for the DVD burn, but with editing changes I keep making, it is faster to just burn directly from the project.
I am not using a separate audio file. The audio is embedded in the video.When I play the project and not the DVD, the audio and video are fine.
I'm a FCP person who has gone to premier cc because I dont like the new ver of FCP which seems to be imovie on steriods. How do you move the timeline cursor from the end of one clip to start of the next. In FCP ver 7 it's a simple button.
View 2 Replies View RelatedBehavior that I'm used to in both AE and FCP: When I double click the nested sequence my cursor lands in the exact same location on the timeline matching the original cursor location. So if I'm viewing clip 1234.mov on the main timeline I would expect that after double clicking and opening the nested sequence I would still be looking at clip 1234.mov. Premiere is not handling it the same way.
The way Premiere Pro CC Behaves: I double click the nested sequence to open it but it doesn't match my cursor location. Instead it lands me in the location I was last positioned when inside the nested sequence. This is very frustrating when trying to make client changes based on the timecode of the master sequence. Once I open the nested sequence I have to hunt for the clip that needs editing.
It's like the anchor point for the cursor is way off. I can click paint brush, and the paint will show up halfway across the page. If I keep clicking, the painted spot will finally show up under the cursor and I draw. If I move the cursor, and start again, same problem. If I enter text, the text willl appear so far below the picture, I have to zoom out so far, the the picture is a very small square. I grab the text box and move it back up to the picture, zoom back in and finish. If there is more text, I just duplcate the layer, so I don't have to go through the drill again.
Example: [URL] .....
Same problem with drawing a line. I click on the start point, and the line draws itself, off page to the left: [URL] ......
My video drivers are up to date, I'm working in Win 7 and CS5
I noticed that if i draw a very short line (about 10 pixels or less) then cursor shifts back to starting point.
Tested on systems an drivers:
Mac OS X 10.6.4 or 10.7.4
Driver 6.3.0 or 6.3.3-3
Photoshop CS 5 (12.0.4)
Photoshop CS 5.5 (12.1)
Mac OS X 10.8.2, Driver 6.3.3-3 and Photoshop 6 (13.0.1) - same problem.
I have three Intuos 5 tablets for now and all have this bug so this is not a hardware problem i think. Corel Painter 12 - all good.
i have a black magic declink studio on my hp workstation Z600 and im working on a premiere cs project and wanted to watch on a external monitor , when going to preferences playback setting black magic isn't appearing as an option but in audio hardware it is!!
View 3 Replies View RelatedIn X6, I select the Text tool, then in the docker or on the tool ribbon I set the point size to, say, 12 points.
But, with the Text tool still active, when I click to deposit artistic text, the point size changes to 24 and the text is deposited in that size.
Next time I select the Text tool, the point size shows as 12. But when I click to deposit artistic text, the point size changes to 24 and the text is deposited in that size.
How can I arrange for all artistic text I deposit to have a certain point size I choose.
I've tried to set a simple point in model space. I typed PO - enter - typed a pair of coords into the 2 boxes, and then enter. No point was created.
View 4 Replies View RelatedI have a layer I'm resizing and is currently in Transform.When I beging to drag the layer to position while it is in resize the center reference point will jump to my mouse causing me to move the reference point outside of the tranform layer. Normally I would have to click on the reference point and drag it intentionally or hold CTRL and click in the transformed layer to set a reference point, but it since CS6 is had still remainded in CC.
This happens when I transform the layer (Ctrl+T) and then grab the layer to move. I have to put the reference point back to center via mouse or by the reference point on the menu bar up top. Then I can go back and drag my later where I need it to finish my transform.
I am trying to create a clip that will be played on a loop so I want to make sure that the in and out point are identical (the clip is of an object which is rotating). Is there a way to overlay the in and out point to line up the placement of the in and out points?
View 6 Replies View RelatedHow can I import a Power Point Presentation into Premier Pro
View 3 Replies View RelatedIn Premiere Pro CC, if I have previously set an in and out point in my source monitor, the spacebar plays clips from the in point only. I'd rather be able to move my CTI to any place in my clip, hit spacebar, and play from there but it always snaps to the in point and plays from there.
The play around shortcut is a joke because it doesn't play from the playhead location and loops at seemingly random intervals.
I select an audio clip in timeline to open it in Source Window.
I try to change the IN POINT from inside the Source Window and I crash. Every time.
Then I click CONTINUE and get this:
I am running PPCC 7.2.2 (4) on a MacPro with 10.8.5 installed.
What are the rules for how elements (specifically, collections and other collection sets) are ordered within a collection set?
I was trying to get a collection to appear at the top of the list of items in a collection set, but it seems to get stuffed below all the other collection sets regardless of the name given to the collection.
I'm using AI CC now, but I noticed this problem in earlier versions of AI: If I want to place a one-word label on an illustration I move the type insertion cursor to a speific point on the screen image and click, but then the flashing insertion point, where the label will actually start, pops up elsewhere, usually a line or two above where the cursor was, and a pica or two to the left, forcing me to type the label, then move it into position rather than simply typing it in the right place and moving on. The problem is merely annoying, but I'd like to fix it. It's probably a matter of ignorance-I simply haven't read the right documentation, but I don't know what to call the problem. Where can I find out how to change the position of the cursor relative to the insertion point?
View 2 Replies View RelatedMy cursor appears and disappears while in GIMP as I move the cursor over the canvas. I can make the cursor appear but only if there is no movement of the cursor. It makes no difference which tool I select, the size of the canvas, or the level of zoom.
Please note that this only occurs in Gimp, and none of my other applications. It started when I upgraded from openSUSE 12.1 to 12.2. I'm assuming that it has something to do with my input device configuration, but I could be totally wrong.
I have a total of 3 input devices - Core Pointer, Logitech USB-PS/2 Optical Mouse, and Virtual Core XTEST Pointer. Both the Optical Mouse and XTEST Pointer are DISABLED. Core Pointer is the only one enabled. Enabling Optical Mouse and XTEST Pointer give me other problems in Gimp and need to remain disabled.
For the Core Pointer, Mode is set to SCREEN, a message says that 'The axis X has no curve', and the following Axis Settings:
X 1
Y 2
Pressure none
xtilt none
ytilt none
wheel none
In Gimp Preferences->Input Controllers, there are three active controllers - Mouse Buttons, Main Mouse Wheel, and Main Keyboard.
OS: Linux 3.4.11-2.16-desktop i686
System: openSUSE 12.2 (i586)
KDE: 4.8.5 (4.8.5) "release 2"
Display Info:
Vendor: Intel Corporation
Model: G33
2D driver: intel
3D driver: Unknown Gallium (9.0.1)
In Xcode, we have to define cursor as:
resource 'CURS' (16001) {
$"00 00 00 00"
$"18 00 3C 00"
$"1E 00 0F 00"
$"07 80 03 C8"
$"01 E8 00 FC"
[Code]...
In Windows we use .cur file, simpler.
I want to convert .cur file to the mac format above, how?
Best practices for setting up systems in a lab environment. We have a lab enviroment of about 200 systems that access AutoCad, Inventor, Mechanical and others.
We need to have a customized interface come up when Autocad is opened by students.I have read that you can do this with profiles and workspaces and also with loading a acad.lsp file.
In the past we have just copied the Windows admin profile used to customize AutoCad to the default profile. In AutoCad 2013 that does not seem to grab everything. It doesn't seem to be the best way to do what we need.
We will also be moving to Windows 7 soon which will also cause an issue.I want to find the best way to do this with out having to deal with the Windows profile.
Can I use "edit in" in Lightroom to move video clips to premier or premier elements to edit them?
View 17 Replies View Related