Doing a bend on diamond plate. I have applied a texture map to the side of the plate that has the diamond pattern. When the pattern gets in the corners (inside or outside), the texture map shifts. When it does this, the diamond pattern does not look the way the real part will. Below is an image of what I am seeing.
View 6 RepliesI have attached a pic of what I am trying to accomplish.
The part was done in SW, but I am now needing to do it in Inventor.
I have a flat plate, 12" square, that I am needing to bend the 2 corners up, with 10 1/2" between bend lines.
I tried using the "BEND PART", but I can only select one line. What should I use so I can bend all four sides up?
Lenovo Think Pad
Windows 7 SP 1
64 Bit.
Inventor 2013
ACAD Mechanical 2013
I have a sheet metal part I need to show as polished aluminum diamond plate on one side of the material only, just as it would appear on the actual part.
Inventor 2013
I was looking for some background images of diamond plate for a background to my website. If anyone knows were some cool backgrounds for this is, please let me know.
View 1 Replies View RelatedI'm looking to make some diamond plate metal. I've tried on my own with brushed metal as a base, but it just looks rediculas...If you dont know what diamond plate looks like,
It doesn't have to look exactly like that...I'm going to make it look worn with scratches etc...but to make those diamonds look like they actually belong with the metal in the background...
where I can find or a tutorial where I can make a clean diamond plate pattern?
View 1 Replies View RelatedTexture map that will simulate checker plate and industrial steel grating? This would be for Inventor 2013.
View 4 Replies View RelatedI have seen a discussion about counting bends code, any illuminated code maker to do the same but with up and down count?
View 4 Replies View RelatedI couldn't find where this was covered, but I create a dxf from my .ipt files for the machines to cut from. When I RMB on the flat pattern, in the browser, the dxf is created with the bends down. I am needing to do this with the bends up, so when the laser operator stacks the parts cut, the flat will be in the proper position for the brake operator. Is there anyway to have my dxf created where the bends are facing up?
Lenovo Think Pad
Windows 7 SP 1
64 Bit.
Inventor 2013
ACAD Mechanical 2013
With a part that has 6 bends to be made… is it possible to present only 5 bends on one drawing, and the last one on another drawing??
For example:
I have 6 bends to make on “Backliner-01.ipt” and this is what I have to present:
A first drawing, showing 5 of the bends. On my second drawing, hardware is installed. On the third drawing, showing that the last assembly has to be bent. On the last drawing, a final assembly… that has to show all of the parts (not only the assembly's).
I want to insert a channel section in bends... but i cant select that surface to insert frame... So What can i do.
View 4 Replies View RelatedWhat is the name of a value that might hold the total number of bends in a part?
Or at least how those feature are managed?
Simply put, I'd like to pull the total number of bends into a parameter so it can be exported later.
I am having trouble with a part that I wont to convert to sheetmetal and make a drawing with bend annotations.
Converting the part goes fine but the flat pattern is only a "semi-flat-pattern" 2 of the 4 bends doesn't unfold.
I have a 8mm plate and the internal radius is 2mm and the external radius is 10mm and the bend angel is 10 degrees sow everything should be fine.
But how to add the last to bends to make my flat pattern unfold correctly?
Inventor Professional 2012
Vault Professional 2012
Is there any VBA code that can count the number of bends used in a sheet metal part?I would like to make a custom property of this, so it can be exported to Excel for input in our ERP system
View 8 Replies View RelatedI try to make double bends with the face command and i don't succed, the options in the More are are greyed out.
I don't understand at all what they are, i tried with 2 edges at an angle but no.
Let me start by saying that we rarely use sheet metal parts so I'm not real familiar with that interface. That said, I can create sheet metal parts with square shapes and bends just fine. However, I'm currently stumped as to the best way to model what should be a pretty simple plate.
We have a large, thin (1/8") square plate to which we want to add 2 opposing diagonal very slight breaks to add stiffness to the plate. More specifically, we want these diagonal bends to cover the center part of the plate leaving about a 2" flat flange all the way around the plate.
I have a face plate with strokes on it to represent pressure increments.I cannot get the numbers onto the face plate.On the large stroke it starts at 0 and goes to 9 .. How do i add the numbers. Also i used extrusions for the increment strokes with circular patterns and mirror features.Is this how it should be modeled?
2013 EDU
I seem to have made what many might consider a rookie mistake. Built a fairly complex structure for an overhead crane system and get to the end to find that I missed two holes. The problem with these two holes is it is ONLY 1 plate (my grounded part), but I have used this same part in one other instance. So if I edit (even from within assembly) and add the two holes to the grounded plate it creates them in the other plate, which I dont want.
Since I have the second plate being used as a refence to locate MANY other parts on this unit, it would be quite difficult to replace it with a new part (same but different file name).
Any way to add said two holes to the grounded plate only and not the other?
Inventor 2014 PDS
I'm modeling a band that will be screwed onto the inside of a sheet metal cylinder. The band will be rolled to the ID of the cylinder. I'm trying to model the holes in the band, and place screws into the holes. I'm not sure yet how the holes will be machined out in the shop--whether they'll be drilled or punched, made before or after the band is rolled, placed based upon degree or arc length, etc.
1. Is there a better way to model the band and its holes?
2. How can I properly and easily insert the bolt into the holes since they're no longer "perfect holes" that can be used in an "Insert" constraint.
3. How can I then pattern the bolt so I don't have to insert one into each hole?
I have attached a jpeg file of a Plate out of a heat exchange.It shows half of the Plate but it is identical shape for top and bottom.I am able to create the solid shape but i need creating the numerous patterns onto the plate.How would i place the pattern feature onto the Plate?
Also from the picture there is a gasket.Would this be made as a separate part and placed on the Plate in a assembly file?Would the gasket be best made using sweep function?
I have created the plate as a solid model but would Sheet Metal also work or even be a better choice?
Inventor 2012
I have an oddly shaped flat plate extruded from a sketch, the sketch of which has lots on constructions lines, none of which actually represent solid edges of the plate. However, I want to locate the plate to other components via the geometry defined in the sketch.
I find that when I am trying to constrain the plate to other parts none of the sketch geometry is available to me. Points, lines, construction lines, circles; I can select none of it when constraining. I am confused. How can I constrain such a part?
Just to clarify - the flat plate is the base of a structure. Its profile is decoratively shaped, so nothing about the cut edge of the plate is suitable for constraining to. I need to constrain off geometry defined in the sketch.
I have "Shared" the sketch.
Inventor 2013
I want to form a plate (collar palte around branch (riser) connection, which when is flatened the projected circle will be eliptical. Before Refold I want to cut plugholes for welding. In flat position it looks like a flange /w holes and the middle cut-out is elliptical. I want to refold it to be again in rolled shape.
My system has Inventor Professional 2013.
I have been trying to fold a round plate which has 10 milimeters thickness.Is there any way to fold this or unfold ?
View 4 Replies View RelatedAny way to show clearly that there are counter bores on both sides of a plate. It does show the dotted lines for when it is on the down side of the plate, but in some sections i have a counter bore of the same diameter on both sides of the plate. Is my best bet just to to create two drawings of the upper and lower faces?
Also i've been trying to use the hole tables, something thats new to me, and i can get all the holes coming up, but im unable to get them to show up as actual counter bores, instead it shows up as two entries.
I am trying to learn how to carry out stress analysis within inventor and have applied what seemed logical to me, however when I got my results file it does not seem to add up.
I want to investigate the effect that a crack will have on a piece of steel plate, I have applied a fixed constraint to one side of the plate, and a load to the other side, as well as a separation contact on the sides of the crack (see file attached).
I need to create the crimp plate in inventor to give my shop the measurements before the crimping process for material and also give them measurements to complete the crimping process. I figured I could use the sheet metal process. I'm trying to find an easier way than going back to Autocad and p-line everything.
View 6 Replies View RelatedI have just created a cylindrical object with an extrusion length of 300 mm and then created an assy(.iam). On to this cylinder i have placed a plate at right angles to the axis of the cylinder
What i wish to do now is mirror this plate.
It would appear the best way would be to create a work plane(mirror plane) thro the centre
Of the cylinder,however, how can this be done if when requested to create the plane 3 points are required,am i missing something here.
I have drawn a cylinder, with inside diameter 1028mm, wall thickness 5mm. We usually have calculated unfolded part length like this: outside dim. 1038mm - 5mm (wall thickness) = 1032 x 3,14 = 3240mm. Now when i unfold in inventor I get for the length 3215,35mm. It is quite far from the result we usually would have received.
Unfolded part will be rolled to cylinder. What parameters should be overlooked when making unfolded parts for plate rolling?
I could not find Round Perforated Plate style / appearance on Autodesk Inventor 2013. Maybe it called "Perforated Metal 01 style" on previous Autodek Inventor version.
I just found Oblong Perforated Plate as attached.
Looking for 2012 sheet metal template with all the common plate sizes already in the rule?
View 6 Replies View RelatedHow do you most easily do a sheet metal plate that needs to follow a surface?
L1 is less than L2, and a radius of the plate?
In Inventor 2012