I'm looking to make some diamond plate metal. I've tried on my own with brushed metal as a base, but it just looks rediculas...If you dont know what diamond plate looks like,
It doesn't have to look exactly like that...I'm going to make it look worn with scratches etc...but to make those diamonds look like they actually belong with the metal in the background...
I have a sheet metal part I need to show as polished aluminum diamond plate on one side of the material only, just as it would appear on the actual part.
Inventor 2013
I was looking for some background images of diamond plate for a background to my website. If anyone knows were some cool backgrounds for this is, please let me know.
View 1 Replies View Relatedwhere I can find or a tutorial where I can make a clean diamond plate pattern?
View 1 Replies View RelatedDoing a bend on diamond plate. I have applied a texture map to the side of the plate that has the diamond pattern. When the pattern gets in the corners (inside or outside), the texture map shifts. When it does this, the diamond pattern does not look the way the real part will. Below is an image of what I am seeing. Â
View 6 Replies View RelatedBasically we are trying to make a 3D plate (in this case a 2" thick piece of steel) and have a 3D hollow shape inside. Its split into Top and bottom, as shown as the below picture.
top View (plate 1).jpg
I have tried the loft command (which I just learned off within the past hour or so) and it indeed works. But I wish to use its as the opposite, where the middle is hollow and the rest is a solid object.
Side View (plate 1).jpg
I have tried the loft command (which I just learned off within the past hour or so) and it indeed works. But for the life of me does not know how to get it as one big object with the middle shape hollow. Am i missing a step or is it another command completely?
Also, once the object has been created, I want to split the object on its X axis mulitple times, almost like an exploded view. Each split will have its own set of top and bottom orifices which will represent multiple plates.
Is there a way to do that? Also is there a way to gain and separate the top and bottoms of these newly split plates?
Here is the drawing file as well to work on -> 3D-MK1.dwg
I want to form a plate (collar palte around branch (riser) connection, which when is flatened the projected circle will be eliptical. Before Refold I want to cut plugholes for welding. In flat position it looks like a flange /w holes and the middle cut-out is elliptical. I want to refold it to be again in rolled shape.
My system has Inventor Professional 2013.
I am trying to learn how to carry out stress analysis within inventor and have applied what seemed logical to me, however when I got my results file it does not seem to add up.
I want to investigate the effect that a crack will have on a piece of steel plate, I have applied a fixed constraint to one side of the plate, and a load to the other side, as well as a separation contact on the sides of the crack (see file attached).
I need to create the crimp plate in inventor to give my shop the measurements before the crimping process for material and also give them measurements to complete the crimping process. I figured I could use the sheet metal process. I'm trying to find an easier way than going back to Autocad and p-line everything.
View 6 Replies View RelatedLooking for 2012 sheet metal template with all the common plate sizes already in the rule?
View 6 Replies View RelatedHow do you most easily do a sheet metal plate that needs to follow a surface?
L1 is less than L2, and a radius of the plate?
In Inventor 2012
how to draw a diamond shape but my plan is not working. I am drawing a basic square and filling it with a color, then going to "rotate" to turn it into a diamond. The edges are SO rough. Is there a better way to create shapes with angles and somehow keeping clean adges.
View 2 Replies View RelatedI have a flat square image that im working with and i am trying to make it appear to be the top of a diamond shape. How can i get this effect so it looks like the user is looking down on the top of the diamond shape? I put a square in and used the beval and emboss setting with a max size and max depth. It looked likes what im trying to do but it is not making it pointy at the top. how can i get this effect?
View 2 Replies View RelatedI'm trying to re-create this effect. The only image I have to work with is very small (I apologize if it's hard to see). Basically, It is a rectangle that has diamond patterns that seem to stretch as they extend. I'm trying to re-create this effect and have no idea where to begin.
View 1 Replies View Relatedway to make 4 white diamonds within a bigger yellow diamond. I try to make an big diamond by rotating a square 45 degrees. No problem there but whey I make the smaller diamonds out of squares and try to put them into the larger diamond it is all messed up?
View 1 Replies View RelatedI have a diamond image, which obviously has different shades in it, it actually has dark, like dark brown shades, which i want to change to lighter smth like light yellow, i tried replace color, hue/sat//light but the effect is not realistic like an actual diamond looks, it is loosing its luminosity. i even tried with magic wand tool, by selecting each darker part and changing color, but it does'nt look realistic either.
I m using Photoshop 7.0
i'm trying to make a banner for a jewelry store and the guy wants a wire-frame diamond that rotates... i have absolutely no clue where to begin. does anyone know how to accomplish this? can it be done in photoshop/imageready?
except i want just the wire-frame of the diamond, not actual shading, and also maybe have the diamond rotated 45 degrees to the left.
my friends likes to make a present to cut diamond patterns into steel, but he doesn´t find any suitable technique,
how to create right patterns, that fills entire circle without odd effects.
How I might create the effect of a diamond sparkling which I can use to overlay a video clip.
I want to add an effect to a face as if one of the person's teeth sparkles. I can remember in the movie The Great Race where this effect was added to a smile by the actor Tony Curtis. This is the effect I am trying to produce. I have looked at all the video filters but there are none which will produce this effect and it any case I think that I will have to do it using an overlay track rather than a video filter as I would want to position the actual sparkle according to where the 'tooth' is on screen.
I have a diamond pattern that needs to be a polyline and also needs to be offset on each side of the diamond. When I create a polyline out of one diamond pattern and then try to offset the polyline pattern a certain distance on each side, it will only let me offset to one side and not the other.
View 9 Replies View RelatedI am producing a glass of beer with bubbles rising, with a simple 360 degree orbit animation to be played on a loop. I downloaded the glass file and it came with a HDRI map and look great. I wanted animated bubbles so have used a SuperSpray particle system based on the Bubbles preset, tweaked to reduce everything down to the right size.
It all looks fine, but I have some strange reflections going on inside the glass, on the animation they travel the opposite way to the bubbles, so they must be a reflection issue.
3DS Max 2011 / Showcase 2011 (Backburner 2008.1.1)
Mac Pro (running Windows 7) all 64 bit
Intel Xeon E5520 @ 2.27GHz 2.39GHz (Dual) 16GB Ram
NVidia GeForce 9500 GT x2 + GeForce GTX 285
I am drawing a simple diamond shape made with one rectanlge shape and multiple line segments. As I drew the design, I made sure to connect all the segments at the anchors. When I select all of the segments and try to join the paths, the end points or corners are not smooth. In other words, some of the line segment ends hang over the edges...
Â
The image below shows the left side of the diamond, where the top portion meets the bottom...
I have a sequence of low quality images that captured by a regular shop camera. I wanna identify license plate of the car in images. I am wondering if it is possible to use the sequences to zoom in the image and identify the license plate? 15 images of the sequence are uploaded, if more are needed, i'll upload more:
[URL]...........
I done cmyk with spot plate in photoshop saving the file as a DCS 1.0 file type which gives me a file with an eps extension that I can place into InDesign for color seperation purposes. When I check the color seperation, all both cmyk and spot plates show up.
I need to make a Duotone with a spot plate. When I try to make a duotone and use a spot plate, the DSC option does not come up. I can only save as Photoshop, eps, large document format, pdf, photoshop 2 and raw. None of these give me the spot plate preview in Indesign.
how to make a duotone with a spot channel and save it in a format that will work with InDesign?
I am trying to learn off this video of how to make Bite Marks . I want to learn how to make bite marks for a plate , but this video really doesn't explain how to do it .
View 5 Replies View Relatedcreate extended clean plate to fill extensive holes (created by selections)?
Often I'd like to animate STILL IMAGE but I find very difficulties to fill extended holes in background...
I find Content Aware very very useful but when the background is very not homogeneous you can meet a lot of problems... and I don't now if in this new CS6 anthing is better in Content Aware..
I was reading up on spot colors. And was confused about a term used
The passage:
Quote:
You can also add an extra spot color (or bump plate) to a four-color CMYK image.
what is a bump plate?
How I would draw a simple plate transition? It would be 3' - 6 1/4" OD at the top and 10' - 6 7/8" OD at the bottom. It would be 62" tall. I draw this but can't figure out how to make it "flat" like a layout on a piece of plate to cut out and then form / roll into into it's final shape. I looked at one of our past project's drawings and it shows this, but looking at the dimensions on it, I cannot figure out how it was done.
View 9 Replies View RelatedI just installed the new version LR 5.4 but I can't change the identity plate. It's not a major problem, but it annoyes me because it's always the first thing I do...
View 4 Replies View RelatedHave just installed Lightroom V4.3.
Â
I cannot get my Identity plate to show.
I have attached a pic of what I am trying to accomplish.
The part was done in SW, but I am now needing to do it in Inventor.
I have a flat plate, 12" square, that I am needing to bend the 2 corners up, with 10 1/2" between bend lines.
I tried using the "BEND PART", but I can only select one line. What should I use so I can bend all four sides up?
Lenovo Think Pad
Windows 7 SP 1
64 Bit.
Inventor 2013
ACAD Mechanical 2013