I have a sequence of low quality images that captured by a regular shop camera. I wanna identify license plate of the car in images. I am wondering if it is possible to use the sequences to zoom in the image and identify the license plate? 15 images of the sequence are uploaded, if more are needed, i'll upload more:
[URL]...........
What I want to be able to check is the areas of clipping in the shadows and highlights. Now I know Lightroom is very easy in the histogram, having a little warning button that will display when an area is off. What I've come up with so far for Photoshop is that there are only two tools, in the camera raw and in levels. Camera Raw is pretty self-explanitory, but I want to be able to check this in photoshop after I've done some work on the image. So I see that the levels tool you can click and hold on the triangle, and if you press the "Alt" key it will show you what areas are clipped. I'm not sure if I really understand it though, as it shows areas that aren't really clipped, e.g. a slightly darker area of sky is showing as light blue, but not a solid color, as being clipped. What is that?
I think that from the example above that say the reason the sky is showing a little cyan is that the red channel is being clipped in the dark sky only, and not the other channels. Do I need to be concerned about this for a good quality print? For best display on the web?
As a preliminary to a digital painting I need to identify the overall mid tone (tonal value, not hue) of a color photograph and then reproduce that mid tone in the CS4 Color Picker (or somewhere) so that there is a choice of color tints that can be given to that particular (overall mid) tone. It will then be used to simulate an imprimatura transparent wash treatment over a white canvas (layer).
It should be easy I'm sure but I haven't been able to find a way to do it. I had hoped that Levels might be used to identify the mid tone, and then give it an identifier (?like an RGB number)which could be used in the Color Picker to choose a color with the mid tone value.
I just upgraded to LR 4.0 and the identify duplicate function does not appear to be identifing duplicates.
I was cleaning off cards and wanted to make sure all the photos had been added to the catalog when I realized that photos which have been imported, will reimport.
The "don't import suspected duplicates" box is checked. I verified one photo, _img_2597.cr2 , was both on the card and in the catalog. LR4 re-imported it - putting a duplicate in the catalog.
I then added some new photos to the catalog and then tried to re-load them: the detection of duplicates worked. It apears that photos from the 3.6 catalog are the issue.
I have:
rebooted the system
opened up a backup catalog
synchronize folders
All to no avail.
I have a personal block library, that somehow has gotten "infected" with AEC. I'm not using any AEC objects on purpose - but loading my library file now loads the various AEC object enablers. How can I find the mysterious entity that is using these?
View 1 Replies View RelatedI'm working on a windfarm access road (5m wide with widening at bends to 8m) and I need to identify the areas of widening.
I've got the centreline alignment and created the 2.5m offsets to each side. I have also created widening on the insides of the bends using the widening tools and used a linear taper at entry and exit. I now need to hatch up the portions where the road has been widened to demonstrate compliance with the specification and the only easy way I can see is to export to autocad and use the hatch tools (not tried to hatch between alignments).
Whilst this works it isn't dynamic so if the alignment is adjusted the widening alignments are also moved but the hatching remains.
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
As I understand, sites like What The Font or What Font is are not effective in identifying script fonts.
I wonder if there is any alternative way to identify script fonts?
fonts.jpg
I need to identify these Fonts, used in traffic signs – as well as the Font used in the quotes measurements below. "What The Font" could not find out them.
I'm running into issues with some skeleton parts (with the BOMStructure type of "kPhantomBOMStructure"). When these files are manually opened up by themselves and saved, I get an error stating that "<filename> can only be saved in the context of another document which is not currently in memory".
I've seen other people with this problem in the regular Inventor discussion group ("cannot save changes", "save error"), but with no real solution.
What I'd like to be able to do is find out through the APIs which file this needs to be saved with. I'm worried that I wont be able to get this information since Inventor itself won't tell me.
I have created a sample drawing, to illustrate to the design manager at work that we can use AutoCAD to assist us with the scheduling of materials, but I am unsure of all the ins and outs of it myself!
See attached drawing to make sense of the following:
Ordinarily we would use a panel reference number for all 50mm panels of identical length, i.e., all 1200mm panels (our standard width) will be assigned a panel code, often P01... etc etc. From the data extraction (EATTEXT) command, as you can see, all 50mm cleanroom panels under the 'name' column are according the block name, in this case, I've called it "Cleanroom Panel 50mm". Is there any way to assign an individual tag to all panels of equal length, yet maintain the same block - or is this simply asking too much?
The reason for this is that although the autocad generated table is ideal for quantifying and placing orders for materials, we are a design and build firm, all our construction workers will need to be able to identify where on a plan an individual panel is, i.e., all well and good to say one panel is 332mm long, and one is 350mm long, but he will need to know what panel is to be installed where...
Does anyone know what effect has been used on this image?
I've got to try and replace that top picture and can't find anything in Photoshop 6 that seems to match that effect. Anyone know of a filter or similar that I could plug in that might do the same?
I was looking for some background images of diamond plate for a background to my website. If anyone knows were some cool backgrounds for this is, please let me know.
View 1 Replies View RelatedI done cmyk with spot plate in photoshop saving the file as a DCS 1.0 file type which gives me a file with an eps extension that I can place into InDesign for color seperation purposes. When I check the color seperation, all both cmyk and spot plates show up.
I need to make a Duotone with a spot plate. When I try to make a duotone and use a spot plate, the DSC option does not come up. I can only save as Photoshop, eps, large document format, pdf, photoshop 2 and raw. None of these give me the spot plate preview in Indesign.
how to make a duotone with a spot channel and save it in a format that will work with InDesign?
I'm looking to make some diamond plate metal. I've tried on my own with brushed metal as a base, but it just looks rediculas...If you dont know what diamond plate looks like,
It doesn't have to look exactly like that...I'm going to make it look worn with scratches etc...but to make those diamonds look like they actually belong with the metal in the background...
where I can find or a tutorial where I can make a clean diamond plate pattern?
View 1 Replies View RelatedI am trying to learn off this video of how to make Bite Marks . I want to learn how to make bite marks for a plate , but this video really doesn't explain how to do it .
View 5 Replies View Relatedcreate extended clean plate to fill extensive holes (created by selections)?
Often I'd like to animate STILL IMAGE but I find very difficulties to fill extended holes in background...
I find Content Aware very very useful but when the background is very not homogeneous you can meet a lot of problems... and I don't now if in this new CS6 anthing is better in Content Aware..
I was reading up on spot colors. And was confused about a term used
The passage:
Quote:
You can also add an extra spot color (or bump plate) to a four-color CMYK image.
what is a bump plate?
How to “synchronize” the ‘layout number” with “sheet number”?
As in most cases, the arrangements of “lay outs” reflects the way they are regularly printed, then how could we renumbering the sheets such that the first lay out takes number 1, the second lay out takes number 2,…and so forth.
For example, in the screenshot below, the
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
How I would draw a simple plate transition? It would be 3' - 6 1/4" OD at the top and 10' - 6 7/8" OD at the bottom. It would be 62" tall. I draw this but can't figure out how to make it "flat" like a layout on a piece of plate to cut out and then form / roll into into it's final shape. I looked at one of our past project's drawings and it shows this, but looking at the dimensions on it, I cannot figure out how it was done.
View 9 Replies View RelatedI just installed the new version LR 5.4 but I can't change the identity plate. It's not a major problem, but it annoyes me because it's always the first thing I do...
View 4 Replies View RelatedHave just installed Lightroom V4.3.
I cannot get my Identity plate to show.
I have attached a pic of what I am trying to accomplish.
The part was done in SW, but I am now needing to do it in Inventor.
I have a flat plate, 12" square, that I am needing to bend the 2 corners up, with 10 1/2" between bend lines.
I tried using the "BEND PART", but I can only select one line. What should I use so I can bend all four sides up?
Lenovo Think Pad
Windows 7 SP 1
64 Bit.
Inventor 2013
ACAD Mechanical 2013
How to add this steel base plate, to a HSS column?
Actual column specs attached
I have Revit 2014 MEP
I have a face plate with strokes on it to represent pressure increments.I cannot get the numbers onto the face plate.On the large stroke it starts at 0 and goes to 9 .. How do i add the numbers. Also i used extrusions for the increment strokes with circular patterns and mirror features.Is this how it should be modeled?
2013 EDU
is it possable to add an opening into a plate created in Plant3D?
i.e. i have some equipment that need to pass through the grating of several leveals of a new structure.
I seem to have made what many might consider a rookie mistake. Built a fairly complex structure for an overhead crane system and get to the end to find that I missed two holes. The problem with these two holes is it is ONLY 1 plate (my grounded part), but I have used this same part in one other instance. So if I edit (even from within assembly) and add the two holes to the grounded plate it creates them in the other plate, which I dont want.
Since I have the second plate being used as a refence to locate MANY other parts on this unit, it would be quite difficult to replace it with a new part (same but different file name).
Any way to add said two holes to the grounded plate only and not the other?
Inventor 2014 PDS
If you have a steel plate bent in several directions and with non-perpendicular ends, designed in 3D Auto Cad.
For example, the plate can be curved with a certain radius in the vertical direction and another horizontally. How would you, or what software would you use, to get the plate flattened to the exact measurements of how it should be cut.
Basically we are trying to make a 3D plate (in this case a 2" thick piece of steel) and have a 3D hollow shape inside. Its split into Top and bottom, as shown as the below picture.
top View (plate 1).jpg
I have tried the loft command (which I just learned off within the past hour or so) and it indeed works. But I wish to use its as the opposite, where the middle is hollow and the rest is a solid object.
Side View (plate 1).jpg
I have tried the loft command (which I just learned off within the past hour or so) and it indeed works. But for the life of me does not know how to get it as one big object with the middle shape hollow. Am i missing a step or is it another command completely?
Also, once the object has been created, I want to split the object on its X axis mulitple times, almost like an exploded view. Each split will have its own set of top and bottom orifices which will represent multiple plates.
Is there a way to do that? Also is there a way to gain and separate the top and bottoms of these newly split plates?
Here is the drawing file as well to work on -> 3D-MK1.dwg
I recently downloaded the 4.3 version of Lightroom. I tried to use the IDENTITY PLATE to watermark a photo and print it out and the function does not appear to be working..I have used the feature many times in previous veresions. I am able to see prior versions of my watermark under the edit tab, but they do not show up on the photo...
View 18 Replies View RelatedOn both the main pages and especially on print page. this seemed to have happened when I updated to 4.3 Is there a solution?
View 5 Replies View Related