Photoshop :: Duotone With Spot Plate
Apr 3, 2007
I done cmyk with spot plate in photoshop saving the file as a DCS 1.0 file type which gives me a file with an eps extension that I can place into InDesign for color seperation purposes. When I check the color seperation, all both cmyk and spot plates show up.
I need to make a Duotone with a spot plate. When I try to make a duotone and use a spot plate, the DSC option does not come up. I can only save as Photoshop, eps, large document format, pdf, photoshop 2 and raw. None of these give me the spot plate preview in Indesign.
how to make a duotone with a spot channel and save it in a format that will work with InDesign?
View 4 Replies
ADVERTISEMENT
Mar 9, 2004
I was reading up on spot colors. And was confused about a term used
The passage:
Quote:
You can also add an extra spot color (or bump plate) to a four-color CMYK image.
what is a bump plate?
View 7 Replies
View Related
Mar 4, 2014
With both tools, I can make a few changes and then both will leave a black brush spot. It works, and then it is like the program is too challenged & it just leaves a black spot. Sometimes if I move my mouse to the history panel to back up to get rid of the black spot I get a swipe of the tool all across the image when I'm reaching with the mouse to go back in history.
I'm using PSE 11 and a Macbook Pro.
View 8 Replies
View Related
Oct 24, 2005
I have placed a photoshop file in illustrator CS, the file contains a spot channel transparency that I want to print as a pantone plate. When I print separations my spot channel prints as a shade of grey. Several other vector items (generated in illustrator) using the same pantone print as a solid 100% black. I'm worried that my file will print with the transparency part of my pantone as a shade of its self when I send the files to the printer.
View 3 Replies
View Related
Mar 14, 2008
I have a problem with duotone, before when I use to use this technique, I would do grayscale->Duotone, and in the duotone box I would get a list of preset colors such as PANTONE 122c, but now when I go there i just get box where i must select my own color with the mixer, how do i get these preset colors back?
View 1 Replies
View Related
Apr 15, 2006
how to achieve a certain look in Photoshop.
I am trying to get a duotone (or maybe tritone?) effect - with copper and blue.
View 9 Replies
View Related
Feb 8, 2006
how to create this effect? I am calling this duotone for the lack of better word, which it may not be. I am fairly sure two colors dominate. I do not have the original image so I canot tell what the colors looked like before adjustments.
View 2 Replies
View Related
Feb 4, 2008
I'm using photoshop 6 and have a problem. When I use dutone curves,I can't reset it. Namely that when I finished tinkering with the curve and save the image, when I start on a new image the old curve is still in place. How can I reset the curve back to its original state?
View 4 Replies
View Related
Dec 2, 2005
I have created a duotone in photoshop made up of a pantone grey and black, however when printed it has a pink effect running through it. I know this isnt mainly a printer/print setup error because it looks the same on screen.
View 6 Replies
View Related
Apr 27, 2012
I have two Duotone images generated using CS5. One is of some trees, with "holes" cut out where the leaves were (I used a a mask to generate transparent regions where the leaves should be), and another Duotone image of just the leaves. I would like to combine the two, with each Duotone image retaining its unique and different color scheme. If all went well, the leaves would be visible in the transparent "holes" of the tree image. However, when I try combining the two, by dragging one on top of the other, they both take on the Duotone color scheme of the trees image. So I do see the leaves in the "holes", but they have lost their unique coloring. Is it possible to combine these two Duotone images in some manner? The Duotones are saved in the default .psd format.
View 8 Replies
View Related
Sep 19, 2013
Have a photo of inside of bus, seat covers etc. Color comes out bold, very little black, I can't find a balance, where I have a fairly normal, but lighter black halftone, with an overlay of color.. (Old copy of PS 6) I know, ancient, but it works.
View 1 Replies
View Related
Jan 5, 2012
I've created a doutone in Photoshop, saved as a eps and placed it in InDesign (all CS5). The file will separate correctly in Photoshop but the second color will not separate correctly in InDesign. Can't find anything addressing this issue.
View 2 Replies
View Related
Aug 2, 2012
I have a duotone image (warm grey and black) as an eps in photosho linked to Illustrator file. I need to be able to adjust each color as needed in photoshop. It is already setup as a duotone image and correctly separates in illustrator. I can do overall adjustments as needed but I would like to be able to throw a curve/adjust each color on it's own as needed in photoshop, and then relink.
OS MAc SnowLeopard, CS5.
View 2 Replies
View Related
Dec 17, 2012
I have this image, which is CMYK, and need to create a (green and black) duotone.
Best steps that I need to take with this. I am not sure what PMS green I want at this stage.
View 3 Replies
View Related
Jun 12, 2008
I have a 2-color logo that is in TIFF format but was created as CMYK. It is black and Pantone 323. I am using it in a two-color job and need it to be in the 2 spot colors. I changed it to grayscale and then changed it to duotone, but the colored part shows up pretty muddy and dark looking, like it has too much black in it. I have tried changing the curves but that doesn't seem to help much. If it is duotone and the colors are specified to the printer, will it print correctly, even though it looks yucky onscreen?
View 2 Replies
View Related
Aug 19, 2005
Hoping someone can help me out with this - it's been one of those gaps in my knowledge that I've never really gotten around to filling. I've looked around the net a number of times, but it's also one of those things that I don't really know what to search for. I'm guessing it would come under some kind of duotone or limited palette affair.
So much so, that I can't even find an example image to show you what I'm talking about
Everyone has seen what I'm talking about I'm sure. If you imagine a nice, sharp, black and white photo - then imagine superimposing a colour on top. So you have the same nice sharp contours and tones - except you now have black, colour shades and white - instead of grey shades.
View 2 Replies
View Related
Apr 28, 2008
If you wan to use duotone to give that depth and vide variety of tones you cannot use the BW adjusment layer correct?
Because you need to start with a greyscale to get to duotone, correct?
View 8 Replies
View Related
Jan 10, 2014
I've used Lightroom 3, 4 and now 5 so I know my way around the software pretty well. Never had an issue like this in previous LR versions. Basically, when I Spot Edit a spot (such as a speck of dust that was on the sensor or lens) there is alway s a "ghost" of the speck that remains, no matter what I do. The Opacity is set to 100, yet the tool behaves as if it is set to 90. It happens with Clone and Heal. I have also tried adjusting the Feather setting, to no avail.
View 2 Replies
View Related
Sep 5, 2012
Recently one of my photographer friend shared a scanned photograph, which was processed in photoshop and Duotone color mode was applied. So it's a PSD with Duotone color mode. Now when we go to Save as option, there is no option for saving it as TIFF or JPEG.
View 6 Replies
View Related
Jun 16, 2012
Why am I losing the effect/color when going from duotone, tritone, etc. to rgb? Not using spot color, just using the picker to select the colors.
The when I try to change modes to RGB so I can save as a jpg it goes all b&w. Never had this issue before. This seems to happen only when I use the artistic filter graphic pen. I go to graphic pen use it, then grayscale, then duotone, then rgb.
View 3 Replies
View Related
Apr 7, 2012
I've got LR4 and a bunch of photos with 3 nasty dust marks.Spot Removal does not allow to mark one of these spots (the pointer does not turn into the marking circle).Probably LR cannot see it as needing repair.
View 3 Replies
View Related
Aug 16, 2009
I am desiging labels for a vinyl record.
I had a rough deisgn to i converted ot greyscale but then no option for dutone was available.
So I made a new greyscale file...import the layers i want into a new psd file made to be the right size i require.
then convert to greyscale and save
but i still have no option to make duotone...
With other files not included the layeres i have imported in it works but not with these.
View 1 Replies
View Related
Apr 13, 2009
With a RGB or CYMK no problem for me to have certain element in the picture distinguishing from the rest. But now I have to do the same building up in duotone (2 PMS colours). It looks like Photoshop doesn't allow to put a black&white layer into a duotone document (it automatically turns into the 2 duotone colours).
So how can i make a duotone image (source = FC) in which a part looks "black and white" (1 colour=black) and a part "lights up" in the second colour (2 colour= yellow)?
- so I know how to make a duotone image, that's not the problem
- i know how to work with layers and masks
(i try to upload the image.. but server seems very busy...)
View 1 Replies
View Related
Sep 2, 2013
I have a sequence of low quality images that captured by a regular shop camera. I wanna identify license plate of the car in images. I am wondering if it is possible to use the sequences to zoom in the image and identify the license plate? 15 images of the sequence are uploaded, if more are needed, i'll upload more:
[URL]...........
View 2 Replies
View Related
Aug 22, 2006
I was looking for some background images of diamond plate for a background to my website. If anyone knows were some cool backgrounds for this is, please let me know.
View 1 Replies
View Related
Feb 22, 2005
I'm looking to make some diamond plate metal. I've tried on my own with brushed metal as a base, but it just looks rediculas...If you dont know what diamond plate looks like,
It doesn't have to look exactly like that...I'm going to make it look worn with scratches etc...but to make those diamonds look like they actually belong with the metal in the background...
View 9 Replies
View Related
Apr 13, 2006
where I can find or a tutorial where I can make a clean diamond plate pattern?
View 1 Replies
View Related
Nov 15, 2013
I am trying to learn off this video of how to make Bite Marks . I want to learn how to make bite marks for a plate , but this video really doesn't explain how to do it .
View 5 Replies
View Related
Jul 10, 2012
create extended clean plate to fill extensive holes (created by selections)?
Often I'd like to animate STILL IMAGE but I find very difficulties to fill extended holes in background...
I find Content Aware very very useful but when the background is very not homogeneous you can meet a lot of problems... and I don't now if in this new CS6 anthing is better in Content Aware..
View 1 Replies
View Related
Mar 1, 2011
How I would draw a simple plate transition? It would be 3' - 6 1/4" OD at the top and 10' - 6 7/8" OD at the bottom. It would be 62" tall. I draw this but can't figure out how to make it "flat" like a layout on a piece of plate to cut out and then form / roll into into it's final shape. I looked at one of our past project's drawings and it shows this, but looking at the dimensions on it, I cannot figure out how it was done.
View 9 Replies
View Related
Apr 8, 2014
I just installed the new version LR 5.4 but I can't change the identity plate. It's not a major problem, but it annoyes me because it's always the first thing I do...
View 4 Replies
View Related
