I have created a duotone in photoshop made up of a pantone grey and black, however when printed it has a pink effect running through it. I know this isnt mainly a printer/print setup error because it looks the same on screen.
View 6 RepliesI have a problem with duotone, before when I use to use this technique, I would do grayscale->Duotone, and in the duotone box I would get a list of preset colors such as PANTONE 122c, but now when I go there i just get box where i must select my own color with the mixer, how do i get these preset colors back?
View 1 Replies View Relatedhow to achieve a certain look in Photoshop.
I am trying to get a duotone (or maybe tritone?) effect - with copper and blue.
how to create this effect? I am calling this duotone for the lack of better word, which it may not be. I am fairly sure two colors dominate. I do not have the original image so I canot tell what the colors looked like before adjustments.
View 2 Replies View RelatedI'm using photoshop 6 and have a problem. When I use dutone curves,I can't reset it. Namely that when I finished tinkering with the curve and save the image, when I start on a new image the old curve is still in place. How can I reset the curve back to its original state?
View 4 Replies View RelatedI have two Duotone images generated using CS5. One is of some trees, with "holes" cut out where the leaves were (I used a a mask to generate transparent regions where the leaves should be), and another Duotone image of just the leaves. I would like to combine the two, with each Duotone image retaining its unique and different color scheme. If all went well, the leaves would be visible in the transparent "holes" of the tree image. However, when I try combining the two, by dragging one on top of the other, they both take on the Duotone color scheme of the trees image. So I do see the leaves in the "holes", but they have lost their unique coloring. Is it possible to combine these two Duotone images in some manner? The Duotones are saved in the default .psd format.
View 8 Replies View RelatedHave a photo of inside of bus, seat covers etc. Color comes out bold, very little black, I can't find a balance, where I have a fairly normal, but lighter black halftone, with an overlay of color.. (Old copy of PSÂ 6) I know, ancient, but it works.
View 1 Replies View RelatedI've created a doutone in Photoshop, saved as a eps and placed it in InDesign (all CS5). The file will separate correctly in Photoshop but the second color will not separate correctly in InDesign. Can't find anything addressing this issue.
View 2 Replies View RelatedI done cmyk with spot plate in photoshop saving the file as a DCS 1.0 file type which gives me a file with an eps extension that I can place into InDesign for color seperation purposes. When I check the color seperation, all both cmyk and spot plates show up.
I need to make a Duotone with a spot plate. When I try to make a duotone and use a spot plate, the DSC option does not come up. I can only save as Photoshop, eps, large document format, pdf, photoshop 2 and raw. None of these give me the spot plate preview in Indesign.
how to make a duotone with a spot channel and save it in a format that will work with InDesign?
I have a duotone image (warm grey and black) as an eps in photosho linked to Illustrator file. I need to be able to adjust each color as needed in photoshop. It is already setup as a duotone image and correctly separates in illustrator. I can do overall adjustments as needed but I would like to be able to throw a curve/adjust each color on it's own as needed in photoshop, and then relink.
Â
OS MAc SnowLeopard, CS5.
I have this image, which is CMYK, and need to create a (green and black) duotone.
Â
Best steps that I need to take with this. I am not sure what PMS green I want at this stage.
I have a 2-color logo that is in TIFF format but was created as CMYK. It is black and Pantone 323. I am using it in a two-color job and need it to be in the 2 spot colors. I changed it to grayscale and then changed it to duotone, but the colored part shows up pretty muddy and dark looking, like it has too much black in it. I have tried changing the curves but that doesn't seem to help much. If it is duotone and the colors are specified to the printer, will it print correctly, even though it looks yucky onscreen?
View 2 Replies View RelatedHoping someone can help me out with this - it's been one of those gaps in my knowledge that I've never really gotten around to filling. I've looked around the net a number of times, but it's also one of those things that I don't really know what to search for. I'm guessing it would come under some kind of duotone or limited palette affair.
So much so, that I can't even find an example image to show you what I'm talking about
Everyone has seen what I'm talking about I'm sure. If you imagine a nice, sharp, black and white photo - then imagine superimposing a colour on top. So you have the same nice sharp contours and tones - except you now have black, colour shades and white - instead of grey shades.
If you wan to use duotone to give that depth and vide variety of tones you cannot use the BW adjusment layer correct?
Because you need to start with a greyscale to get to duotone, correct?
Recently one of my photographer friend shared a scanned photograph, which was processed in photoshop and Duotone color mode was applied. So it's a PSD with Duotone color mode. Now when we go to Save as option, there is no option for saving it as TIFF or JPEG.
View 6 Replies View RelatedWhy am I losing the effect/color when going from duotone, tritone, etc. to rgb? Not using spot color, just using the picker to select the colors.
The when I try to change modes to RGB so I can save as a jpg it goes all b&w. Never had this issue before. This seems to happen only when I use the artistic filter graphic pen. I go to graphic pen use it, then grayscale, then duotone, then rgb.
I am desiging labels for a vinyl record.
I had a rough deisgn to i converted ot greyscale but then no option for dutone was available.
So I made a new greyscale file...import the layers i want into a new psd file made to be the right size i require.
then convert to greyscale and save
but i still have no option to make duotone...
With other files not included the layeres i have imported in it works but not with these.
With a RGB or CYMK no problem for me to have certain element in the picture distinguishing from the rest. But now I have to do the same building up in duotone (2 PMS colours). It looks like Photoshop doesn't allow to put a black&white layer into a duotone document (it automatically turns into the 2 duotone colours).
So how can i make a duotone image (source = FC) in which a part looks "black and white" (1 colour=black) and a part "lights up" in the second colour (2 colour= yellow)?
- so I know how to make a duotone image, that's not the problem
- i know how to work with layers and masks
(i try to upload the image.. but server seems very busy...)
In LR4 print module the print and print one tabs are greyed out and I can't reset.
View 1 Replies View RelatedSo I am working on this document and it has silver background. I go to print preview (Photoshop cs3 and cs4 on Vista) and I get color looking more like bronze looking but when I do print, it comes out just like it should (in working mode which is Monitor RGB with Proof colors checked).
This setting is the only one I've used to make sure image/psd looks exactly like what it should when printing. I tried the default Working CMYK with and without Proof colors but it's still showing me the bronze look instead of silver. I've looked on the net and no exact easy fix for this was found. I really really appreciate any help.
Another simple question is regarding size. I'm working on a document size of 17.5 x 8.7 inches and the actual Banners will be printed at size 175 x 87 inches (5 banners each at 35inch wide but combined into a big one). So essentially, I'm working at 10% the size of what the final print will be and my file size is 760mgs. You can only imagine how big the file would be if I work on the actual size.
When printing from PS CC using the print dialogue box I am getting a severe red shift in the final print. When I print the same image from PS CS5 or CS6 I get a color-correct print.
Â
I am running a MacPro with OS 10.7.5, and printing to a Canon iPF8300 with its latest firmware and print driver. I am using the proper ICC profile for the paper. In the print dialogue box, I select "Photoshop Manages Colors".
Â
A couple things I noticed: In the "Print Settings" where I dial in the printer setup, the settings for "Color" are both turned off (Colorsync & Vendor).In the printer driver settings (still within "Print Settings") the "Color" tab is grayed out, but when I click the "Settings" for that sub-panel, Colorsync is selected.When I printed the image from the Canon PS Plug-in, the red cast was gone, but the blacks were too heavy (there is no "Black Point Compensation" check box available because the Canon plug-in uses Adobe Color Engine for that, and it's only 32-bit and won't run).Â
-PC based system running Windows Home Premium 64 bit8 GB ramLots of hdd spaceCS5.5 Master Suite
-Epson Sylus Photo R1900
Â
Operating system, CS5 suite and printer drivers all updated.
Â
When attempting to print a photo, it can take anywhere from 5 to 15 minutes for the print dialog box to open up. It takes SO LONG that it appears that Photoshop has frozen, but it has not. The print dialog box opens eventually. This started about 2 months ago. I have looked at all preferences, assigned more RAM to Photoshop, uninstalled and reinstalled the entire suite, ran all updates, uninstalled and reinstalled the printer drivers - all to no avail.
Â
I am at a loss as to why it would take SO LONG for the print dialog box to open after selecting print? I thought there may be a problem with the print spooler or print queue, but the slowness happens BEFORE the print back system is touched. The print queue is empty, and there is nothing stuck in there. I've checked.
I'm having trouble printing in Photoshop CS2. Rregardless of which printer I try to print to, I get the message "Could not print because of a problem writing the print file". I have never encountered this error before.
The psd file I am printing is a wall banner, and is quite large (~200MB). It contains elements copied/pasted as pixels from Illustrator CS2. However even if I flatten the file, or save as a flattened tif, I still get the same error message.
Thinking that the psd file is corrupted, I tried printing an earlier version of the file, with no luck. I've even tried printing other, small unrelated files, and can't print those either. Even after rebooting the computer.
The computer I'm using has a dual core processor, 4GB RAM, a decent graphics card and is running under XP. I have gob-loads of HD space and also use a scratch disk.
I really only want to print the file myself as a proof. However, I'm concerned that the banner printers won't be able to print the file either.
I have Windows 8 and am new to Elements 11. How do I get print to completely fill a 4 x 6 print paper?
View 5 Replies View RelatedI have trial version of Elements 11; Also have full version, but have not installed yet, as I wanted to wait until I completed current project. I created/edited an album of wedding photos in the Organizer. I tried to upload album to Shutterfly to make an archival DVD and also make a photo book in Shutterfly. The photos uploaded individually to the Shutterfly print page to print individually, but the album will not upload to My Pictures, it shows the album name, but it is empty. How do I get the photos to upload?? Shutterfly was not sure how.
View 1 Replies View RelatedUsing a Mac, what is the best way to print multiple images on a 4 x 6 print in Photoshop Elements 11?
View 5 Replies View RelatedI use CS6 on a Mac pro os 10.8.3 & print to an Epson Pro 4900. If I print an image via LR4 print module the print comes out at 12 X18 in. Recently I have tried that same image via CS6 and the print comes out at 6 5/8 X 8 1/2 in.
Â
In Print Settings in Printer Setup in the print module of CS6Â stats "Super A3 / B 13 X 19 but the printed image dimensions are a little over half of that.The printer used to print normally in CS6 print file.
I've been using Photoshop CS3 for awhile and printing fine. I just updated my print driver (Epson 3800 to version 6.5) as well as my graphics driver (NVIDIA GeForce 8500 GT)at the same time. After rebooting I cannot click on the Print menu selection to print. IE: When I click on Menu the Print option is greyed and not selectable. Print as well as Page Setup, and Print One Copy are all greyed out (not selectable). I rolled back my graphic driver and rebooted and it still doesn't work. I then upgraded my driver again and it doesn't work. I've opened jpg's as well as psd files and no matter what file I open the Print menu's are greyed out. I can print from Word and other programs. I also reset my preferences (con-alt-shift) and still can't select print. I've done everything but uninstall. I'm hoping not to do that. My computer is on: Vista Ultimate 32 bit SP1, 4gb ram. In addition to updating the print driver and graphics driver I updated: Ultimate Extra Sounds, Group Policy Preference Client Side Extensions, Samsung CLP-310 Printer driver, and Microsoft Tinker.
View 4 Replies View RelatedAdobe Colour Management Print defaults seems to be assigning RGB meta to B&W pages and incurring Colour Print charges for B&W prints.I can manually change the print colour management to Printer managed on a per print basis instead of the default adobe colour managed which "cures" the issue but I do not seem to be able to save that setting as the default.
View 1 Replies View RelatedI have a number of maps in .tiff format. I want to cut parts of these maps and paste into seperate documents. That is fine. I then want to blow them up to A4 size for print. I am slightly confused on how to do this for the following reasons: Under the "image" menu item, I can see "pixel dimensions" and below this "document size".I can also set the canvas size. I am not sure if "document" and "canvas" size are the same? Could somebody please advise me. Basically, I want to enlarge my tiffs to fill a European A4 size page. GF
View 2 Replies View RelatedI get an error saying I need to install a printer ... but CS2 works fine. What do I need to do?
Windows XP, Konica Minolta C253